Toffe

Oh well, f***.. at lot more work than i had hoped for then

Oh well .. So i need to rewrite everything if i want an app to do the same as my excel file ? Or is there another solution ? It is pretty basic excel, mostly "IF(C31=B5;E5;IF(C31=E5;......etc"

Hey ! I have been doing some programming in Excel over the last couple of years. Some more advanced that others. Now I have slowly started to do a little bit og programming in Android Studio using Kotlin. I was wondering if it was possible to somehow import an excel file into the studio ? so it can use the calculations and formulas ?

Please see the post before yours, I have made a lot of changes, one of them was changing the Case

Well, i made it work ? I enable something called Lan option ROM ? and disabled ErP ? no clue what either is, but it works now !

HEEELPPP okay .. not that desperat .. But i do need some assistance please .. I am trying to setup this WoL from my phone .. but I am beginning to think that it is my Mobo that is the problem ... I got a z370-a mobo .. When i try google, all the anwers is about a motherboard called z370 gaming plus .. which have the option of "Resume By Onboard Intel LAN" = "Enabled", which i cant find ..

So ! I have been very busy, but just wanted to give a quick update on what i did so far, and for now! i am done ! As you can see in the beginning of the thread i started out with a Prebuilt MSI codex XE. But to get it as silent as possible I have changed almost everything, and would saved a lot by just building it from scratch ... Changed the case from the Codex XE to a Phanteks P600S, can highly recommend it, easy to built in, looks awesome and good airflow Set in 4 x ML 140 Fans from Corsair, silent and nice RGB An NH-D14 CPU cooler For the PSU i changed it to a Corsair rm750x, the Fan doesn't even start, so it is silent And changed the HDD harddisk in the end to an SSD, because it was the only thing i could hear ... I keeps the CPU under 60C and the GPU under 70 during high loads and is still wisper silent ! Here it is !

I will test it later. and let you know .. Might just buy a Corsair Commander PRO instead ...

Yep it is set to PWM. But the pump fan will have it running at full speed right ?

Msi z370-a pro.. should have written that earlier

And then my CPU fan to a normal SYS fan ? I have a Noctua NH-D14 with one fan, which is connected to the CPU fan header on the motherboard ..

So I just got this new Phanteks P600s Case !" and I am very happy with it. But now i have to get a new motherboard ! The Phanteks p600s case has a usb c 3.1 gen 2 cable, which i have to connect to my MOBO, but i got a MSI z370-a Pro .,.. So can anyone recommend me a Mobo with a usb c 3.1 gen 2 header ? and some RGB!

Got 3 ML140 fans. All 3 connected to the RGB controller. And connected to the Phanteks Fan Hub that is included in the case. 1 in the white header, 2 in the black headers. The fan hub is then connected to my SYS fan 2 in the motherboard and to the PSU. I have tried all 3 fans in the white header, the fan in the white header is always going slower than the rest, and sometimes not even running when set to low RPMs.

Hello All ! So i finally got to build in the Phanteks P600s case and it is awesome ! But I have used 3 Corsair ML140s to the fan hub that is included in the case. 2 in the normal 4 pins and then 1 fan in the 4 pin that should tell my system how many RPMs the fans are doing. The problem here is that the fan connected to the 'signal' 4 pin, is running a lot slower than the rest of then fans ? Am I doing something wrong ?

Sounds like you are looking for a high end case and not a budget case for less than 75 with shipping?