mattrflores

yeah sadly its the best i can do right now in terms of photos, many thanks

I want to say thanks to the users that took the time to steer me in the right direction. Their suggestions were valuable for me to plan this rig out, and I couldnt be happier with the result. I have one thing to look for now, I am interested in hooking up the rear grille to a duct that will let me pull; ~40 degree Fahrenheit air through my loop. I cant find anything that will take the square grill and adapt it to a 3 or 4 inch circle short of just 3d printing the damn thing, of which I have no access to. Any help? Any ideas on what to use would be great. Here is the final loop though my first ever and not a single leak.

my res is upside down, and a drain port was drilled through the top of the case that i use the fill the loop, i can flip the res yes though if there is reason to do so. Would you be willing to explain what you had in mind by drawing lines?

Forgot to mention, the radiator has a port up on top, is that usable to connect the res to the rad or do i need to connect to the lower port with a long piece of tube. also, i am toying with the idea of turning the pump to have a simple straight shot to the rad port closest to the glass

Ill tell ya, it feels good to hear positive feedback on the work ive done. I have some fancy bends i wanted to try once i knew my proper gameplan, will this be a good loop moving forward? Ive shown the location for the drain which ill use my 90 degree swivel for, and need help for where to place a manual exhaust vent. also attached are all the fittings i have available to work with, minus four chrome push fittings which are available.

Hello all, I just finished my new pc and need some feedback. The loop is ridiculously hard to get going, and seeing as this is my first go ever at this I used barrow Chinese fittings/tubing/etc. (which were surprisingly good) and now have invested in a fresh set that ill be using permanently (i know i would mar the finish of the compression collars for example) . My question now is how to improve the loop, may I have some help (via mspaint etc.) on fixes i can make to the existing loop moving forward. Things like flipping radiator orientations, different fill and drain port locations etc would be great! Dont be afraid to suggest new fittings, as I have stuff coming in like exhaust valves and the like. Exciting stuff. If better angles are needed let me know.