swarmling

Thanks for the replies, I'm going to try to remove the data with easeUS

My laptop fell on the floor and is fine except the hdd is broken and needs to be replaced. How do I save the data from that and move it to a new one? Is this possible and will it be just like turning it on as usual. I need access to some accounts that are locked from this computer.

A few weeks ago I was having problems with my GPU that lead me to RMA it. I sent it away and turned off the power on my PSU since I was going to be away for a couple of weeks. When I came back I installed the new GPU but my screen was black, it was on and I can sometimes use the menu to choose inputs or settings etc. But other times it puts itself in sleep and I cant wake it, the power light blinks with or without the GPU installed. I have tried with a DP cable, 2 separate HDMI cables each with a DVI adapter on one end. From the GPU to the monitor, from the MOBO to the monitor, DP and HDMI simultaneously and switching inputs and nothing. When the monitor powers on I get the company logo and a no signal, then either a black screen that I can use to change settings on the monitor OR a black screen as if the power is off.My computer starts and runs fine otherwise, the capslock light responds when pressed. I have removed and reinstalled the RAM one at a time, the coin battery on the MOBO. Removed all power connections and held down the power button and currently have all non essential components unplugged. Right now it's just the MOBO, RAM, CPU, CPU cooler, SSD, HDD, and an HDMI to the monitor. ANY help is welcome and I'll respond asap. I wasn't sure if this was the correct place to ask so redirect if needed and thanks in advance. My computer specs taken directly from Newegg.------------------------------------------------------------MOBO: GIGABYTE AORUS GA-AX370-Gaming K7 (rev. 1.0) AM4 AMD X370 SATA 6Gb/s USB 3.1 HDMI ATX AMD MotherboardCPU: AMD RYZEN 7 1700X 8-Core 3.4 GHz (3.8 GHz Turbo) Socket AM4 95W YD170XBCAEWOF Desktop ProcessorGPU(before rma): EVGA GeForce GTX 1070 FTW GAMING ACX 3.0, 08G-P4-6276-KR, 8GB GDDR5, RGB LED, 10CM FAN, 10 Power Phases, Double BIOS, DX12 OSD Support (PXOC)GPU(after rma): EVGA GeForce GTX 1070 FTW2 GAMING iCX, 08G-P4-6676-KR, 8GB GDDR5, RGB LED, 9 Thermal Sensors, Asynchronous Fan Control, Thermal Display LED System, Optimized Airflow Fin Design, Die Cast/Form Fitted Baseplate/BackplateSSD: SAMSUNG 850 EVO 2.5" 250GB SATA III 3D NAND Internal Solid State Drive (SSD) MZ-75E250B/AMHDD: WD Black 4TB Performance Desktop Hard Disk Drive - 7200 RPM SATA 6Gb/s 128MB Cache 3.5 Inch - WD4004FZWXRAM: CORSAIR Vengeance LPX 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 2666 (PC4 21300) Memory Kit Model CMK32GX4M2A2666C16PSU: CORSAIR HXi Series HX750i 750W 80 PLUS PLATINUM Haswell Ready Full Modular ATX12V & EPS12V SLI and Crossfire Ready Power Supply with C-Link Monitoring and ControlOS: Windows 10 Home - Full Version (32 & 64-bit) / USB Flash DriveMONITOR: Viotek GN32C 32” Curved LED Computer Gaming Monitor 144HZ DVI HDMI DisplayPort