Netsky

Thank you for the in depth explanation, really really well explained, I will follow the instructions probably the ones with clean installation. Thank you so much one again!

I already have ftpm support with this bios the other updates are upgrades to AMD Agesa idk what that is. So to sum up the things with 2 variants and how understood them 1st one - make usb drive to uefi bootable using rufus and put windows iso there, then switch in bios settings CSM to disable and boot from usb stick and clean install windows 11. the one that you dont suggest - 2nd one - using cmd mbr2gpt to add uefi partition to the disk and switch it format style and then after that restart to bios and again stop CSM but this cmd command has risk of data loss. Sorry for my messy stuff i dont want to brick something and wallbanging my head. I just want straight forward thing and most easy.

I talk about cmd mbr2gpt which makes small partition on the disk and enables UEFI support I cannot update bios to last version because its not recommended i use ryzen 5 2600 and last bios update only supports the 5000 series ryzen. The problem with the mobo is literally there is no switch in bios settings Legacy to UEFI it just has CSM enable or disable. WTF ASROCK.

Hello guys, I want to upgrade my Windows 10 to Windows 11, but as you know TPM has to be enabled and Secure Boot aswell, the problem with my situation is that Secure Boot needs BIOS to be UEFI not Legacy. In my instance its Legacy. I read that I need to change the BIOS with cmd command or reinstall windows, the other question is IF i reinstall windows does my USB drive with the iso file needs to be UEFI compatible and IF yes, how do I do it, or previously I need to disable Legacy from BIOS to UEFI. Lets go back to the cmd command, do i need to do it in safe mode or i can just type it directly to CMD with administative rights. I use AsRock B450M pro4 motherboard and in the BIOS under Boot Menu I have only CSM does that mean this Legacy and IF disabled its UEFI. Sorry if the information is abit messy, im a bit confused of what should i do.

Thank you

Yup totally agree

Yes totally i mean i have 1 nvme on the pcie right, but i have one more nvme sitting around and i thought if i can use it still on the sata 3 slot bacause i dont have sata 3 ssd so yea thats it

Hello i have Asrock b450m pro4 mobo i use one pcie nvme ssd on the gen 3x4 slot and i have one more m.2 sata slot.. So my question is can i use NVME pcie ssd on that SATA 3 slot?

Hello, Two days ago windows notified me to restart my PC because my SSD was having bad errors, so I did that but surprisingly my disk check was like 5 seconds and nothing really happened then it booted into windows like normally, but that windows notification still persists as of Security and Maintenance tab says 'Restart to repair drive errors *Important*'. I checked my SSD with HD sentinel and it showed pretty good. Do you guys think this is a software error with or may be really hardware issue with bad sectors and errors. (CMD - chkdsk doesn`t do anything). Thanks!

A-tuning doesnt control rgb and polychrome just shutdowns on its own when i start it and just the fan blinks 3-4 times and then stops blinking and continues lighing for example blue ( the color i choose via bios).

Hello guys.. and Merry Christmas I bought asrock b450m pro4 motherboard and it has 4 pin rgb header and 3 pin addressable rgb header, i also bought raidmax NV-R120TP rgb LED fan and it clearly says compatible with rgb capable mobo + asus aura sync. The fan has 4 pin connector. I plugged this 4 pin connector to the 4 pin rgb header on my mobo and i can only control it from my bios which is annoying i gotta enter the bios to change the color everytime when i want a new one plus obviously it stays 1 color 24/7. I tried installing aura sync but it doesnt even install it gives me an error. I tried installing asrock rgbpolychrome but when i start it it crashes and my fan just blinks 3-4 times. I tried installing msi light but doesnt work aswell. I tried putting the rgb connector to the 3 pin addressable header and obviously doesnt even light up. Guys if you have any idea how would be possible to control it via software please leave your opinion.

Hello guys my question is pretty basic. I purchased Asrock b450m pro4 and it has : 1 x CPU Fan Connector (4-pin) 1 x CPU/Water Pump Fan Connector (4-pin) 3 x Chassis/Water Pump Fan Connectors (4-pin) So i plan to use 3 fans for intake, 1 for exhaust and my question is would you recommend 1 of chassis headers for exhaust and the other 2 for 2 of my intake ones and the last one plugged into the CPU/Water Pump Fan Connector or leave that free and buy splitter and just use 1 header for 2 fans.

Really good answers guys. Thank you.

Hello guys.. The dilemma is between Thermaltake Core G21 TG and Fractal Desing Focus G. Which case would you choose and why. I am going to build my PC with air cooler and i want better airflow. Thanks. Please leave your opinions.