Jump to content

Mephi00

Member
  • Posts

    530
  • Joined

  • Last visited

Everything posted by Mephi00

  1. I never used xmp I always set frequencies manual. The weirdest thing is, that the crashes started after I had to clear the cmos.... It worked fine for 24hrs before that, with the usual timings and frequency
  2. Hello guys, So I've got two upgrades since this happened, the first one were two new nvme ssds and the other was an upgrade in ram, I added another 16gig kit, with tighter timings(the other one wasnt available anywhere). After fiddeling with M.2 genie in my boards bios, but nor getting it to work properly, I had to clear the cmos to get it back to booting. From this point on I experienced a lot of BSODs, which were only fixed by downclocking my RAM from 3500C16 to 3200C16. Fast forward to just 10 mins ago, I experienced a freeze, where the audio would still play / get transmitted from the internet, but the PC wouldn't react to any input. Please post your ideas on why this would happen, I would love to get my 3500C16 and 24/7 stability back. Specs: MSI MEG Z390 Ace 9900k 2x8 GSKILL Trident z rgb 3600C17 2x8 GSKILL Trident z rgb 3600C16 (C17 wasn't available) (new ssds) 2x2tb adata xpg sx8200 pro sys drive samsung 960 evo 250gig
  3. Update 2: it seems like my ram just got way worse.... its booting 3200 now instead of 3500 with the same timings
  4. Update: it seems like ram is the issue but it was tested and is (was) running at 3500 C16-17-17
  5. Hello there, I'm in a mess, after I tried to raid two new installed nvme drives and experienced crashes with my third nvme drive (boot drive). I then disabled m.2 Genie and resorted back to a striped volumen in windows. It was at that point that G HUB didn't pick up any of my devices and I have to reinstall in order for G HUB to find them again. At the same time, windows started BSODs when I tried to boot with my OC enabled, I managed to boot and enable it when restarting again yesterday, however it didn't work today. The most annoying part is that G HUB won't find my damn stuff. Here are my specs: MSI Z390 ACE 9900k 2x8 gskill trident z rgb 3600cl17 2x8 gskill trident z rgb 3600c16 (no C17 available) boot drive samsun 960 evo new drives adata xpg sc 8200 pro 2x 2tb I hope some of you guys and gals out there can help me solve this. Edit: I forgot to mention that the OC is stable and tested with ~8hrs of prime95 (heavy ram testing, because I recently added the 3600c16 dimms) the cpu is known stable at 5Ghz
  6. fps is the frames per second your computer outputs to the display. The hz is the amount of pictures your display can show in one second. your monitor isn't glitching when you have less fps than hz, it might just not look as smooth as it would be able to.
  7. I did search for posts and some help, but I didn't find any so I thought that asking here was the right place to find my answeres. And here I got what I needed to know thank you guys
  8. It's a fullcover block, but if what you're saying is true, I think either the pump has a problem or the ek thick rad is too much lol but I'll test it later today Edit: I just remembered that my pump was never running at 50%, cause its vibratin quite bad, while doing so. It was running 30% then 70% then 100% and from 70 to 100, was verry little difference (to none), but from 30-40 to 70 there was a difference...
  9. if not for performance, there is no reason for me to upgrade then, I don't have the system running 24/7 and the corsair pump ain't even a year old. What about that rad upgrade, needed or unnecessary?
  10. I got a corsair D5 and I already tested and found out that I get about 5-10C better temps when I turn that pump to 100% on my cpu alone
  11. Hi watercooling people, I am looking into upgrading my gpu with either big navo or the new nvidia 3000 series. I already have a custom loop for my 9900k, which is currently hooked up to a ek 360 thick rad (60mm), so I was planning to integrate the new gpu into that loop. I'm currently planning to get another 240 ek rad (please tell me if this is too much) and now I am asking myself, if dual pumps in parallel or series are worth it.
  12. @Jumper118 Could I bother you to ask, on which page you are for R20 scores, cause I'm pretty sure I posted mine quite early... If I messed something up, I'll just add my scores here...
  13. I mean yea, but I want to do all my hand writing on that machine and because calculations are quite hard to do in word its a 2 in 1 I‘m after. But I have already spent my money, because I‘ve found a great easter deal on a zenbook flip 15
  14. I think linus did a video on a fully passive cooled pc once or twice, most of the time ces tho. For a cooling loop, I use an ek 360 thicc rad and corsair ml fans (wouldn‘t reccomend buying because of the horrendous price, just for rgb rad fans ) and my 9900k @5Ghz runs warm, but not hot for a 9900k plus its not really loud. I use an open case btw, so adding a sound dampening case might do the trick for an aircooled system
  15. Get a custom watercooling loop with a good pump and get loads of radiators and silent fans for them to be as silent as possible. Or you get really exotic with passive cases.
  16. Directx 12 is somewhat multicore optimized, therefore slower on single core performance optimized systems. DirectX 11 is still really focused on single or dual core performance. Thats why you might perceive 11 faster than 12, using your 7600k.
  17. Hey there, I've been looking for a 2 in 1 laptop for quite some time now. I am a computer science student and had way too much paper to carry around aside a laptop, so I decided to get a surface pro, problem is: it's quite expensive for the hardware so I had a look at the surface book, because I'm looking for some light gaming on the go, but definitely more than intel uhd 620 graphics... What I've narrowed down is the surface book for a heck ton of money, the ho spectre x360 or asus zenbook flip 15 UX563FD-EZ043T (1050 max-q, i7-10510U 1080p) all I basically want is a 2 in 1 with slightly better than acceptable pencil support for a reasonable price and I really don't need 4k on 15 inch... Regards, Mephi
  18. m8, that's running 3200 cl14, and more than that aint booting or stable enough for a cinebench run, i think... but thank you for the hints and lemme google some ram subtiming tutorial
  19. Did some more ocing today, tried to get it running with 5.3 on avx loads, won't do that so I settled with the best result of today
  20. Maybut, but cacheless SSDs sometimes have worse performance than a HDD, so I'd reccommend against a cacheless SSD anyways
  21. My 9900k on a thick ek 360 rad is about as hot as your 9700k, it's just normal for these chips... Intel hit the limits of 14nm
  22. sure you can do that, but the windows 10 installer might accept your key anyways (Microsoft is really nice with their policy switching to Win 10)
  23. from what I've read in the bios of my MSI MEG Z390 ACE, the lower the number is the lower your voltage drop will be. but that might differ depending on your motherboard vendor.
×