jtann12

What a relief! I was so worried about it not working now I just have to figure out how to mount the psu lol Thank you!

I am getting a old server in a couple weeks free of charge , I am pretty good with building Consumer grade computers ,but this is my first delve into the server world. It is the Intel P4000M Chasis the model that has dual reduant 750w psus, now all I could find is mainly refurbished models of those powersupplies and the ones in the case are 6 years old. The mother board is dual socket and has a standard 24 pin ATX as well as 8 pin EPS connectors for each of the processors. Is it okay if i use a standard ATX PSU with this motherboard? I think I can fix it into the case with a few screws. I don't really want to hunt for those exact server PSUs they are super expensive new like 200-400 bucks a pop and I already got a 1000W EVGA Gold rated PSU that is standard ATX. I also got dual Xeon E5-2667 V2 chips and 64 gigs of ECC DDR3 1800mhz ram for the board I would appreciate any help as this will house all our family memories and movies and shows for plex!

I recently went to the Verizon store to get a new phone and I settled on the A71 cause it had the features I wanted and non that I didn't. Well little did I know that they want you to finance a phone to get the discount which I was not about to do and they wanted 780 bucks for the same phone that is on Samsung's website for 450. I just ordered the phone straight from Samsung's website and it is the unlocked version and it says it will work with Verizon, has anyone had experience with unlocked phones with Verizon especially this model? Who has experience with Samsung's shipping it says estimated delivery march 16th I guess because it is out of stock.

No worries I appreciate the help that is a easier way of thinking about it! Thank you in advance

Ohh I see thank you I was getting worried bout this drive I ordered

So GPT is best?

Sweet thank you

I want to but then I would have to reformat my C drive then re install windows all over again

I do not want to boot to this drive I just want to have this as my F drive not C

I have an MSI X470 Gaming Plus now I used to have a different mobo and had issues so booting into Legacy fixed the issues. My WD Black Nvme ssd is still partitioned the same as it was on the old mobo and so are my other drives. I recently ordered a 10Tb IronWolf Pro for games and large files from now on, Will I still be able to use all 10TB ? Can legacy partition using GPT or NTFS for drives other than C drive? The BIOS says its UEFI + Legacy.

sweet yeah i am re using the case and chip but thats it new other things hahah

Does anyone know what size motherboard is in the dell 5676? I want to get a new motherboard but idk if its standard. I think it is mATX but cannot tell.

I have also got the Critical Structure Corruption blue screen twice in the last few months

I have checked its a dell so not a lot of options like that in the BIOS I had to boot it into legacy I had some issues with UEFI

Temps are in the 50-60c range not high and if I crank the fans it is in the 40c range

I have a Pre built because at the time of purchase it was cheaper to buy this dell with a Ryzen 7 2700 16 gigs of DDR4 2400 and an RX 580 4 gig with a 144hz 1080p monitor for 900 bucks, than to build one with the same specs. Dell does not have this PC on their site anymore ,but at the time they advertised it to run at 3.2 ghz base clock and up to 4.1 ghz. It does not boost at all it stays at 3.2 even with the power settings in high performance mode and when I tried using Ryzen master half the time it would not even open and when I tried to even apply a 100mhz overclock from 3.2 to 3.3 then run cine bench r20 my system would crash. Am I going to be stuck at 3.2 forever with this system?

I have a dell 5676, the gaming inspiron desktop with the Ryzen 7 2700, 32gigs DDR4 2400 mhz, RX 580 4 gig founders, WD Black 256 NVMe SSD boot, WD Blue 1TB 2.5 SSD, Toshiba 1 TB 7200 RPM HDD. Two Dell (D2719HGF) monitors. I have been having some issues with the monitors as well as the PC. The monitors will act weird when I open certain programs and recently I updated it and then the next day it restarted wrong and would not repair windows and would not let me re install it. In legacy mode or UEFI

I have two 6 ft cable matters DP 1.4 cables that do lock

I have a dell Ryzen based 5676 with the ryzen 2700, 32 gigs of ram, and a Refrance RX 580 4 gig. I have this plugged into two Dell 144 hz TN D2719HGF monitors through a display port 1.4 Cable. I am having some issues when opening certain windows and programs for some odd reason. While I am playing a game if I try to alt tab to another window on my other monitor they start flickering and lines appear on the displays or when I open settings or a video from a file and close the windows. If I power one of the monitors off and back on this problem goes away I have the most up to date drivers on both monitors and the GPU. Please help.

It would not let me use Ryzen Master it would open sometimes , but when I tried to change the multiplier that system Crashed.

I did try that

I have done quite a few cinebench runs and it says at 100% but at 3.2 ghz and used a stress test

My bad Yes I fixed it lol thank you for all your help! I still am not sure why my 2700 won't boost it stays at the base clock of 3.2

I am formatting the drive now

It boots to support assist then to the I have an option to go to the BIOS. I have tried just about everything just tried Legacy Boot and got to the windows start screen!!