Mholes

You can get the latest BIOS from the board manufacturers site. For example : https://www.msi.com/Motherboard/support/Z87-G43#down-driver&Win10 64

10 minutes ago, NielsKS said:

my i5 8600k is running at tempratures like 85c when under full load when i play and stream battlefield 1, when i play without streaming it ussualy gets to 75c. i just builded this pc 3 months ago. i use the kotetsu scythe cooler (also recommended for this cpu in this forum). do i need to upgrade the cooler? and whatt would be a good alternative?

2 minutes ago, dgsddfgdfhgs said:

not the cooler, it is the paste

Yea, most likely the problem is the paste. Or bad mounting, what thermal paste did you use?

On 10/19/2018 at 10:43 PM, Alda14 said:

Sorry it is not updated, I currently run an 8700K on an Asus Maximus X Hero mobo, 16 gb Trident Z RGB 3200 MHz, Asus Strix 1080ti OC. with the storage drives mentioned. So would I still be able to boot from the NVME drive out of the box? I would just have to do a clean install of windows? 

Sorry for the super late response, yes you should be able to boot from it.

Unless you have to enable it from the BIOS, mine had it enabled.

BTW , since you have a Z170 motherboard (if your profile is up to date) it should support NVME boot out of the box.

Even my Z97 supported it so i don't see why you couldn't boot from it.

I'm not really sure about your situation but i successfully cloned my Windows 10 from my old boot SSD to my 970 EVO M.2 2280 a while back.

For that i used Samsung Data Migration software.

Ummm... By MY understanding the RPM doesn't really matter if they are all PWM fans?

https://www.reddit.com/r/intel/comments/9pa9fq/intel_9th_generation_nda/

9am EST 10/19

Which is today in about 4 hours.