SirPirate

Hello everyone! I find myself in need of some assistance. I purchased a Samsung A70 as a budget phone that just works but it has been my worst choice so far. It came with a super short charging cable.It works fine, it was just too short to reach my desk so I purchased an Anker PowerLine Plus type C to type C. When I plug the anker cable in the phone starts charging, switches over to fast charging and then rapidly stops charging and starts fast charging again. Normally I would return the cable but the weird thing is this cable charges other phones with no issue so its not very likely that its the cable and I can charge my phone with different cables with no issue so its unlikely to be the port. The cable is brand new and the phone is a couple months old with no water or drop damage.Visually the port does not seem to be damaged in any way. If anyone has some sort of idea as to what the issue might be I would greatly appreciate it.

Well, I checked and its double nat. Unfortunately my isp is brushing me off entirely regarding this (guessing they dont have requests like this much).Ill look into zero tier and hopefully something comes of it. Help was much appreciated.

I had a friend who's in the it field try to connect to it, I've tried on mobile data and I used the port tester.Just public ip.

Its possible its a double nat situation from what I read from the internet.I really wish I could tell you more about connection type but the isp ran a cable through my wall to my router.I have literally no clue as to anything more.Regular copper cable with an rj45 jack.They mentioned its fiber when they were installing it.

I made sure it has a reserved ip 192.168.0.103 and I tried 22;9000;9001;1200;1201;1;20 and a whole bunch more ports.Its just that all the ports are closed and I cant get them to open up.

Walk of shame to the ltt forums for yet another failed project. Im trying to have my rpi 4 be ssh accessible from outside my local network. I opened ports on my router for the pi's local ip (reserved it too). I thought my isp may have a firewall or in some way be blocking ports so I contacted them.They responded saying they do nothing of the sort and all ports should be accessible. Trying the ports with a port checker yields no results, they all come back closed. Any advice would be appreciated!

No audio device shows up there other than the laptop's built in speakers

Hello everyone, I have the following issue with my lenovo y700 : When I boot up the laptop and connect headphones, earbuds or any audio device via the 3.5 jack it works fine.When I remove the device and plug it in again the laptop stops outputting to speakers ( I guess it detects something is connected ) but does not output anything to the audio device ether. I tried reinstalling the audio drivers and updating windows to the latest version. Any advice?

There was a way to run ubuntu just from the usb stick, thats my plan for the moment. run from usb -> recover data -> clean install of win 10 (hopefully)

Thanks, Im downloading ubuntu as Ive had previous success with it . *fingers crossed*

My parents are old and don't understand the concept...

Hello Everyone! I have the following issue: I have an old acer v5-572g running win7 (belongs to my parents) it has priceless documentation it so Im extra careful and thought Id check in for some advice.On boot it gave a black screen (after the lockscreen).I proceeded to restart it a few times and it began running updates.Initially got stuck at 100%, left it there for an hour or so but nothing was happening so another restart.Now stuck at 35%.I need some advice in getting all the data off of it.Ill install win 10 on the thing but Id really like to get into the os to retrieve the data.

Retested again with bd prochot off and it died out at 99C at the gpu, I agree with you 1000%. Im gonna take your suggestion and try to under volt it for now and Im gonna look at liquid metal later on.I think the issue stems from the upgrade from the pentium b960 to the i5.It's probably overwhelming the cooler.In any case, thank you very very much for showing me the light, its very much appreciated!

https://pastebin.com/CpkJaLXS So the tldr of my experimenting is that mod and chip values were locked at 100, clock dips were from 3ghz to 800mhz and at regular intervals.I haven't done any loging with ts before so I hope what I did is useful in some way.

Asking myself the same question.Mine has badly stripped screws, as soon as I get those off Im going to change the thermal paste and play around with new bioses for it and oc the hell out of it mine is an evga 560ti btw

Would it not cut the turbo boost first and then lower clock speed? I ran it on the bed just to starve it for air and it still did ok I think.

Yeah, dips the fps from 40ish to 20 and under.(sorry, could have been more precise)

Massive cpu dips while playing GTA 5. Power settings and temps in order.Never seen cpu usage like that before.Ideas? Recently upgraded to this i5, replaced the fan and power delivery daughter board as they were faulty.I doubt this has much to do with the issue as I was getting 40ish fps with these upgrades/ repairs and the issue started after multiple weeks of gaming.The game is running at 20fps or lower so its pretty much unplayable. Specs: Inspiron n5110 i5 2520m 6gb 1333 ram Nvidia 525m 240gb ssd win 10 64bit

@AbsoluteFool Thank you, that was in line with what I was planning and what I cobbled together from various guides.I do realise it would be a million times easier to just pay the 10$ a month but as I said, I want the learning experience as Ive never done this before.

Im looking at doing something similar to my n5110, except its ancient In any case from my research on the topic, any cpu thats the same socket and TDP should work ( some laptops might require a bios update though). In my case I want to swap out a pentium on the g2 socket with a 2nd gen i5.Other people on the dell forum have done this successfully so it does generally work, all you need to do is set your sights on a machine and watch a 20 min teardown to see if it has everything you need ( a non soldered cpu and ram ) As for the raid 0, I agree with kladzen

Hey guys, Im looking for a good guide on basic web hosting.I need to host 2-3 static websites with very low amounts of traffic and I see that as a great learning experience.I already have an idea of how to make the website itself but practically no clue how to host it on a local machine and attatch it to a dns.Any advice is welcome, Im a complete newb in this field.