dirkga

@Waqas409 That is indeed the best choice in your case. Peace

Update after upgrading to a Ryzen 9 5900x I have 32 Gb ram the CMK16GX4M2B3200C16 (2sets), everything runs stable with XMP1 on 3200, I did however find out that the PBO setting has to be set to either enabled or disabled or even one of the eco settings. But if you choose the auto setting it will not run stable. My aircooler is a Noctua NhU12A and under full load the cpu runs 71,2°C at max. (during a cinebench R23 test, score was 21047) with PBO switched off it had a max temp of 69.6°C according to OCCT. just my two cents

Hi There, You claim to have 3600 Cl18 sticks but your link says 3200 Cl16. I have the same motherboard with a Rx3600 and 4 CMK16GX4M2B3200C16 sticks with Samsung memory on it (via CPUZ you can see wich factory memory is on it) In my case it all runs perfect, I am now waiting for a Rx5900X and as that uses the same memory controller I hope that will run fine as well. my bios version is 7C02v3H

Hy fellow readers, I`m not sure this is the right topic to post this? But i see a lot of topics about Random restarts of the Pc. Two weeks ago i unfortunately had the same issue, after upgrading to a Turing GPU ( i had a GTX 750 Ti). First I swapped the GPU (gtx 1660 S) to another one and the problem persisted. Swapped again to an GTX 1660 ti still to no avail. Then finally i replaced it with an RTX 2060, but as you would guess, still the same problem. So after some reading and different trouble shooting i replaced my 80+ gold 650Watt psu for a tier a 750 watt 80+ gold psu (Corsair RM 750 (2019) ). but as the issue was now far less it however still prevailed. I finally found the real culprit ....... in the bios of my gigabyte Z97 mainboard there is an option called DMI gen 2 speed, for some reason it was set to "auto" . should be no problem as assumed, but after setting it to enabled all the random restarts are now gone. just my two cents, ( hope for some with an issue like this it can help)

I should better first read the rest of the reactions as i only did repeat you guy`s ??

Hi Dijon, as far as i can find (and so could you by downloading the MB manual) is that your Mainboard supports DDR2 800/667Mhz with a maximum of 8GB with four dimms of 2GB each. (if it also supports two of 4GB each I can`t find that in a hurry) the E6750 does supports it for sure. as I had this in my old setup with the intel DG33TL MB and the E6750 ?