Spearlight

Yes I have made the same forum posting but no response has been giving yet

This is on one machines and only in star citizen and has not happened in any other game

My Brother has been having issue with playing star citizen while being in a party either in Discord Or using the Xbox party app from windows itself. His mic will either go robotic while in the game or sometimes it will cut completely out but if he alt-tab out of the game it seems to fix itself. We have tried disabling windows audio exclusive control setting. We have tried verify the files of Star Citizen we have tried to run both discord and SC in admin mode. He has no sound card installed. I have listed brief specs below if anyone has any idea of solutions or possible answers let me know and let me know if you need more information on the PC. Windows 11 CPU: i7-10700F GPU: RTX 2060 RAM: 32GB 3200 Mhz Headset: Corsair HS80 Wireless Headset

while i wait on the response i have found a new Amp (https://www.crutchfield.com/p_530RSM4120/Soundstream-Reserve-RSM4-1200D.html) bit more wattage 1200W it says the RMS is 75w by 4 channels with 4-ohm the website and manual both correspond with the same specs and reviews seem good so more than likely will give this one a shot instead of the Skar 900w if the manual says the true specs can't even use it to began with.

I have sent a support email so should hopefully hear within tmr or next week more than likely next week.

i have linked a picture above referring to what i am saying on the website says RMS at 4 ohms would be 85w but then if you go to the manual it says it does RMS at 55w

well i might half to find a new amp lol cause looks like the specification might not be true i will half to contact customer support and see for sure lol this sucks

i apprentice it very much you have been very helpful.

I see and i do totally agree with what your saying i couldn't image what it could sound like with all of this done but with what i am doing now this is more like a stepping stone so to say this would be like a baby setup to see if i wanted to pursue a more custom setup as to what your describing i do totally agree to what your saying.

lol am 16 almost 17 trying to figure this out so i can learn and have the skills just trying to do anything i can myself to learn the skills lol

So if i understood this correctly we can indeed adjust the settings on the amp for this to work now my question is how i would go about this. I have attached an image of what seems to be the "settings" of the amp so to say now i only plan on using 4 channel and not the 5 one. i have circle the sections that would half to change now i am hoping you might be able to show were we can potential move the screw to lol. I know it can't be all accurate or even if it can be done through a photo lmao but i figured might as well ask lol.

A word of warning I am a completely new to all of this just trying to figure out everything as i do research and from other people knowledge. I have been looking at these speakers https://www.kicker.com/CSC5-Coaxial-Speakers-4-Ohm Their Peak wattage power is 225 i plan on getting 4. 2 for front doors and 2 for rear doors. Their recommended RMS is 75 Watts with their Ohm at 4. I plan on running this speakers off a amp and that is my point of struggle currently trying to find the right amp. So far i am looking at this amp https://www.skaraudio.com/products/sk-m9005d-car-amplifier. Amp is 900 watts i picked this out due to the peak of all of the speakers would be at 900 watts (not sure if that is how that works) now obliviously that is peak i am not expecting to absolute crank these speakers so i don't expect them to get near the 900 watts. This amp at 4 Ohms would provide 85 watts RMS per channel if i am reading this correctly. The speaker are rated for 75 RMS so i am curious if the added 10 RMS this amp could provide would damage the speakers and if so would i just "tune" the amp down a little bit so we can be safe and if this was the case how would i go about this like would adjust the gain on the speakers etc. If anyone has any recommendation for speakers and or amps please let me know. I would like to stick to 5 1/4 speakers. If anymore information is needed let me know and i will provide it.

Sorry everyone for the long pause but the issue has been fixed just sent NZXT a ticket and i sent back and got it replaced all good lol now temps are normal now. :)))

can't i just send it off to https://siliconlottery.com/products/delid?variant=19733401272406 i know i be paying but i feel safe know professorial are doing instead of my headass lmao

oh fun de-lid if my pump is good oh good pls let it be good lol

sorry i was reading the wrong "probe" i fixed the first which would be 1.312v but i didn't fix the 1.367v which is supposed to say 1.312v. So i have it manual set to do 1.25v but it gives 1.312v when running cinebench but i do believe the the crashes in game are a different issue. As far as the orginal issue would be the temp umm not really sets in the high 80s around 86-95 to maybe 100c under full load

now i have also noticed that when running the cinebench it putting 1.312V to the CPU not i have set to manual do 1.25v i believe so i don't know if that has to do with anything as more voltage means more heat but i don't understand why if i have it set to 1.25v it seeing 1.367v if i am looking at the correct "probe?". I am using the HWiNFO64 to montior Vcore. Again sorry for the extremely late replays been a bit busy and sorta forgot about this for a few sorry :(((

sorry been busy but i have pretty much redone the thermal paste redone the remount i have done the BIOS clear and left at default but that was a few months ago. unfortunately i can't change out parts or nothing don't know or not friends with anyone with same specs or near. also side not i got alot of crashes while playing one game Space engineers i mean my pc hard crashes goes to blue screen most of them are driver issues but i have the first time i got one i updated it and still crashed like 4 or 5 times during my 16 hour gaming session (i know lol) but i looked at GPU,CPU,M.2 NVMe and temps were okay nothing to cause a crash but i haven't feel tested it but only seems to crash in that game haven't had any longer gaming session in other games soooo. this pc is becoming much like a car huh lmao seems like lol.

am not gonna attempt lol

i mean like i can send my cpu off for them to delied for 40$

i can send off i guess to silicon lottery if i wanted to do a delid https://siliconlottery.com/collections/sl/products/delid?variant=19733401272406 and looks like that will may become a possibility

any other idea's??

so i give short answer only drop like 5c now it sit in the 95c soooooo fuck

So getting thermal paste into the socket if it happened does nothing?????????

Anything else I should do beside replay thermal paste??