aaronnickols27

So here's the scoop, bought this brand new graphics card,installed it .leds turn on but fans don't spin and it isn't being detected in device manger ,the vga light was on but I got it to turn off and it still isn't being detected by pc, System specs I9 10900k 2x m.2 32gb of ram Z490 gigbtye vision d 1300 watt psu Side note I recently heard my psu fans ramping up and going back down .wonder if my psu is just going bad I've owned it 4 years and have over clocked three cpus with it .my 1080 ti however is being detected by pc .please help

Dsr does do that sometimes,usually a indication the driver is faulty.

Not helpful but thanks for your input

I'm curious if there's anyone out there who has managed to use the g12 bracket to watercool it ?does anyone know about those vrm thermals in the back of the card.i just want to see if anyone has this information or maybe could point me in the right direction as far as where to look

My question is how long have you been playing warzone?only curious because some cod updates have in my opinion bogged down some fps ,what resolution you using ,is everything maxxed out? I have 1080ti gigabyte extreme version owned for 4 years only owner tbut it's watercooled with g12 bracket.The cpu I paired with it is 10900k , however I was using a 8700k and I still got over 170fps in 1080p sometimes even with ray tracing on , 4k usually averaging around 85fps.make sure in Nvidia panel lod is set to allow not clamp ,force mutli thread on ,make sure it's in high performance ,turn off the filtering options ,make sure the gpu profile is set to 1080 ti,make sure physx option is set to 1080ti not cpu .i use precision x16, Id assume your using msi afterburner. try a slight and I mean a slight voltage increase after a decent mem overclock .my cards sits at 2038mhz or core clock and 5613 on mem.when I have had issues in past with frames I would overclock the gpu slightly by slightly I mean 2076mhz core clock and 5800mhz mem clock keep in mind I have alot of headroom because it's watercooled .maybe a really slight overclock on mem.the card might be throttling though,also do a disk clean up admin though,you would be surprised how that copied delivery optimaztions can be in the 2gb range of data ,would suggest driver booster and advance system care for overall system performance,hope I helped My current build is 10900k gigabyte z 490 vison d 1080ti 32gb of ram 1300 watt psu Intel 665 m.2 nvme1tb Samsung 960pro m.2 name 1tb Samsung 850 1tb Samsung 850 500gb

I got it , the post code was just displaying different numbers making me skeptical,but I got the 10900k stable at 5.2 GHz stable temps at 37c .I just used some real world testing by playing insurgency sandstorm worked great fps is buttery thanks for responding to me and being helpful

I'm using that digital display I turned it off for fear I'm might burn down my rig ,I'm might be just paranoid

I'm using the term on the manual,but it's a digital display that shows numbers in sets of two ,no when I power it on it says 65 on the display not even past the bios yet I'll check the fan and see what's going on with it , weird cause it wasn't acting up on my z390 just a week ago

I recently bought a z490 gigabyte vision d mobo,I put the CPU everything turns on but digtal node says 65 c and above or does the node mean something else ,never had a digital node on my other motherboards,also one of my fans not related to the CPU fan isn't spinning but lights turn on I can see it jerking though maybe once but then nothing but lights being that this is a brand new cpu I just shut the computer off so it didn't overheat,I got a thermaltake 360 aio hooked up to i9 but it doesn't seem to be working or is the node calibrating,please help I trolled the internet and couldn't really find a decent topic with right references to my issue

All three drives are working in Harmony,had to reformat the drive causing me issues ,now downloading the lost data .thanks for you response and help

Im confused, can't I just boot with m.2 into windows on z370 and format the 850 that's causing the issue and then try to boot all over again on z390 board

I should just reformat the 850 Evo and problem solved yes? I mean hopefully, unfortunately I'll have to reinstall z370 to do it on as that's the only board that recognizes all 3 ssds with no error.

I think I might have to choose your third option ,I did clone m.2 960 pro fr 850evo and that must be why it's occuring on new motherboard .but it's weird it doesn't do it on z370 where I cloned it from long ago .

When I disable the 850 Evo where the bootmanger is it lets the m.2 boot in flawlessly with the other 850 Evo I have that's 500gb no problmes .just apparently problmes when I boot in with the one 850 that has some old windows files on it apparently,funny thing is the problem doesn't occur on my z370 gigabyte board so it's really odd

Just got a gigabyte z390motherboard I have windows installed on m.2 , however I have two other ssds and apparently my 1 tb ssd has a windows boot manger on it ,could that be the issue and I should just wipe the whole ssd

Ok cool . thanks for the zippy response.

Might be a silly question.... But is adding another 1 tb m.2 nvme ssd running me out of pci lanes, if I got one m.2 nvme ssd already and two ssd plus my 1080 ti. My question is I'm I trying to do too much ? Or do I need a better cpu?