Brick1026

It seems to just be telling me svchost.exe is the issue. Am I misreading this somehow? The issue wouldn't be an exe if it is a driver issue.

Trying to figure out why I BSOD on my PC startup. Typing this now from the PC as it started up the second time but want to get to the root of the issue. Had some crashing issues a few months ago. The crashes were during attempted shutdowns. Don't recall what from. Believe I did an in place install which resolved the issue. Now I'm encountering a BSOD at startup. Here is my dump file. Any advice would be appreciated. ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* ATTEMPTED_WRITE_TO_READONLY_MEMORY (be) An attempt was made to write to readonly memory. The guilty driver is on the stack trace (and is typically the current instruction pointer). When possible, the guilty driver's name (Unicode string) is printed on the BugCheck screen and saved in KiBugCheckDriver. Arguments: Arg1: ffff8d000640ced8, Virtual address for the attempted write. Arg2: 8a00000000200121, PTE contents. Arg3: ffffae03b61246e0, (reserved) Arg4: 000000000000000a, (reserved) Debugging Details: ------------------ KEY_VALUES_STRING: 1 Key : Analysis.CPU.mSec Value: 780 Key : Analysis.DebugAnalysisManager Value: Create Key : Analysis.Elapsed.mSec Value: 4191 Key : Analysis.IO.Other.Mb Value: 15 Key : Analysis.IO.Read.Mb Value: 0 Key : Analysis.IO.Write.Mb Value: 32 Key : Analysis.Init.CPU.mSec Value: 483 Key : Analysis.Init.Elapsed.mSec Value: 26675 Key : Analysis.Memory.CommitPeak.Mb Value: 103 Key : Bugcheck.Code.DumpHeader Value: 0xbe Key : Bugcheck.Code.KiBugCheckData Value: 0xbe Key : Bugcheck.Code.Register Value: 0xbe Key : WER.OS.Branch Value: ni_release Key : WER.OS.Timestamp Value: 2022-05-06T12:50:00Z Key : WER.OS.Version Value: 10.0.22621.1 FILE_IN_CAB: MEMORY.DMP BUGCHECK_CODE: be BUGCHECK_P1: ffff8d000640ced8 BUGCHECK_P2: 8a00000000200121 BUGCHECK_P3: ffffae03b61246e0 BUGCHECK_P4: a BLACKBOXBSD: 1 (!blackboxbsd) BLACKBOXNTFS: 1 (!blackboxntfs) BLACKBOXPNP: 1 (!blackboxpnp) BLACKBOXWINLOGON: 1 PROCESS_NAME: svchost.exe TRAP_FRAME: ffffae03b61246e0 -- (.trap 0xffffae03b61246e0) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000200000 rbx=0000000000000000 rcx=0000000000600000 rdx=3fffffffffffffff rsi=0000000000000000 rdi=0000000000000000 rip=fffff8074184f39b rsp=ffffae03b6124870 rbp=ffffae03b6124969 r8=ffffb002d08f18c0 r9=ffff8d000640cee8 r10=ffff840000000000 r11=0000000000000000 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei ng nz na po cy nt!MiBuildForkPte+0x577: fffff807`4184f39b f0480fba2b3f lock bts qword ptr [rbx],3Fh ds:00000000`00000000=???????????????? Resetting default scope STACK_TEXT: ffffae03`b6124568 fffff807`416c00f2 : 00000000`000000be ffff8d00`0640ced8 8a000000`00200121 ffffae03`b61246e0 : nt!KeBugCheckEx ffffae03`b6124570 fffff807`4145777f : 8a000000`00200121 00000000`00000003 ffffae03`b6124679 00000000`00000000 : nt!MiRaisedIrqlFault+0x15f422 ffffae03`b61245c0 fffff807`4163a029 : 00000000`00000eff 00000000`00000000 00000000`00000000 00000000`00000000 : nt!MmAccessFault+0x3af ffffae03`b61246e0 fffff807`4184f39b : 81008002`159a4867 ffffae03`00000000 9b8a1a8c`3aa00408 ffffb002`c7410000 : nt!KiPageFault+0x369 ffffae03`b6124870 fffff807`41850350 : ffffb002`d21da080 ffffb002`e1acc0c0 ffff8400`98791288 ffff8b80`05d70fb0 : nt!MiBuildForkPte+0x577 ffffae03`b61249b0 fffff807`41c3b21d : ffffb002`d21da080 ffffae03`b6124cb9 ffffb002`e1acc0c0 ffffb002`00000001 : nt!MiCloneVads+0x4b4 ffffae03`b6124c40 fffff807`41add736 : 00000000`00000000 ffffb002`d21da080 00000000`00000000 ffffb002`e1acc0c0 : nt!MiCloneProcessAddressSpace+0x271 ffffae03`b6124d20 fffff807`41ade069 : 00000000`0042ac1c ffffae03`b6125b60 00000000`00000000 ffffb002`d21da080 : nt!MmInitializeProcessAddressSpace+0x191aa6 ffffae03`b6124f10 fffff807`41a69c8e : ffffb002`dbcb9001 00000000`00000080 ffffb002`c1c94560 00000000`00000001 : nt!PspAllocateProcess+0x190731 ffffae03`b6125740 fffff807`41ba35c5 : ffff2dd5`d94a6c17 0000021e`cc010000 00000000`00000000 00000000`00000000 : nt!PspCreateProcess+0x23a ffffae03`b6125a10 fffff807`4163e1e8 : ffffb002`c1c94560 00000000`00000000 00000000`77566d4d ffffae03`b6125a00 : nt!NtCreateProcessEx+0x85 ffffae03`b6125a70 00007ff8`6322f5f4 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x28 00000082`ea5cf368 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x00007ff8`6322f5f4 SYMBOL_NAME: nt!MiRaisedIrqlFault+15f422 MODULE_NAME: nt STACK_COMMAND: .cxr; .ecxr ; kb IMAGE_NAME: ntkrnlmp.exe BUCKET_ID_FUNC_OFFSET: 15f422 FAILURE_BUCKET_ID: AV_nt!MiRaisedIrqlFault OS_VERSION: 10.0.22621.1 BUILDLAB_STR: ni_release OSPLATFORM_TYPE: x64 OSNAME: Windows 10 FAILURE_ID_HASH: {3b24175f-7f5b-9c9f-8aaf-822c248bf0f5} Followup: MachineOwner ---------

Cinebench temps stayed below 70C and scored an 8758 multi core.

To those following waiting for an update I repasted and did a clean out of my PC including the radiator which was FILTHY. My idle temp is now 30-35 and my cpu boosts 200mhz higher then it did before.

Hopefully. Thinking it might have been caked up dust I misidentified tbh.

I washed my hands. Can’t seem to locate any more of it.

I opened up my PC and was working on it today and when I took my hand out I had sole black grease like substance on my hands. Seemed like some kind of lubricant. My PC is AIO cooled and I removed the AIO fan prior to noticing the build of of material which was decently considerable. Code red? How bad an issue could this be? I was handling other parts so it could be spread around now.

I have some thermal paste and a spread on the way. Gonna reseat the AIO and go from there. Hopefully later down the line I’m planning to get a new case with a 3 fan front layout and better airflow.

I suspect it’s my case tbh, I have an NZXT case with shit airflow to the point of the tempered glass panel getting noticeably warm at times.

Just reset back to default. At a cool 40-50 idle.

PBO actually ran it slightly cooler but came out with slightly lower cinebench of 8457.

I did not. Although I am now square one with mobo as I had to jump CMOS. Went in and manually set DRAM speed, disabled auto tuning, and enabled PBO Lvl 2. Didn’t seem to hurt thermals and is about to finish cinebench at about the same final temperature. Haven’t tried running the offset yet but tbh think I just have bad silicone and will have to jump CMOS if I do.

Tried both .05 and .1 for offset and neither worked.

Found it in bios. I haven’t done bios over locking in a siding Ryder master.

Pretty sure ryzen master only lets you adjust peak.