Johnprogamez
-
Posts
42 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Posts posted by Johnprogamez
-
-
I connected my computer to the 3.5mm jack on my mixer and it makes a obnoxious whining sound. I noticed that it does this whenever I uplug it. I have the wharfendale connect 802 mixing desk (non USB version)
-
Does anyone know where to buy a replacement lens for the c920, because I managed to scratch mine and I can't fine one anywhere. One like this:
-
Hey there, solderben
From what I understand this happens with all USB mass storage devices connected to the USB 3.0 ports, is that correct?
Well it could be an issue with the OS as well, besides everything you've suggested. I'd recommend that you check if you have any available OS updates and install them if you do. You could also try resetting/updating your BIOS/UEFI, to see if the same thing happens. Check if the cables of the front panel are properly connected. Other than that you could try reinstalling or updating your chipset drivers, to see if that fixes things up.
Hope that helps. Please let me know how everything goes. -
it is safe, since it is like a normal 8 pin to 8 pin has separated 6/2 and will not make a difference. just be aware that if you short the empty 2 holes it will cause catastrophic damage
-
What fluid did you use in your loop?
-
52 minutes ago, _Hustler_One_ said:
I did the same mistake on the RAM DIMM slot, I cleaned it by dipping a tooth brush into 80% alcohol then brushed the mess, let it dry and install all the components, and I got no problems till now.
I had other problem and it was an unexpecting miss-suspected issue. It was a Displayport cable affecting the motherboard to turn the CPU debug LED on, and unable to boot with intermittent power blinks.
I suspected that my PSU or the CPU are the ones which might fail, but after the long tries and never give up curiousity to search the real suspect, I ended up found that my Displayport cable is the root cause of my PC problem, you might see this as nonsense, because why on earth a DP cable can caused a system not to boot? But it was real and happened to me.
After I ditched that crappy DP cable and use my previous slightly damaged DP cable and also tried to use the DVI cable instead the problem is gone and I never see it come back again till now.. This is one of a strange PC problem. I was about to RMA my PSU though, but luckily I sorted it out before it happen..
Ill try it!
-
6 minutes ago, Astarore said:
Anything that gets stuck in a slot/socket could cause resets.Some thermal pastes can be electrically conductive as well which for sure would cause resets/shut offs. Clean out the slot and it should fix the issue.
My arctic mx-4 is non conductive
-
Reseat sata cables
-
Hi, i upgraded my old build and i realised i dripped thermal paste on the pcie slot , when i first built my system. I went to change my 1060 with a 1080 but it keeps on reseting, when playing games. Not the cpu over heating, 50degrees while playing, and not the psu, since its a new one, and not the graphics card, since it is new. Could the themal paste on the slot be causing resets?
-
-
Intel Core i5-8400
-
-
-
-
are you using ethernet?
-
you can do alot with 1100k
ill send a pc part picker
-
Im planning to upgrade my system, but my ICT teacher told me that both of the gpu's use the same architecture and the 1070ti can be overclocked to mach the 1080. do you think i should save some money, and go for the 1070ti?
(Btw im buying used)
-
-
-
I was about to turn my system off, then install my ram, but then it fell and shorted the gpu
-
I had a gtx 1060 6gb and I dropped one of my ram sticks on the back of the gpu and it may have shorted it
-
I have corsair vengeance ram and it fell on the metal contacts
-
Update, my pc turns on without my gpu
-
I just dropped my ram on my running gpu and now my pc won't even turn on, is my gpu fried???
Whining from computer output into mixer
in Audio
Posted
Changing to rca did help a bit but i still get a faint whining noise still
sound.mp3