Jump to content

dahyippur

Member
  • Posts

    25
  • Joined

  • Last visited

Awards

This user doesn't have any awards

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

dahyippur's Achievements

  1. Assuming memory passes all tests on stock settings, I'd like to make these changes. I'm not able to do extensive troubleshooting as the PC isn't local and my goal is to just get 6000 stable if possible. If anything seems out of place or needs adjusting please advise!
  2. Any software recommendations for testing ddr5 or bios suggestions (mcr, powerdown, fastboot etc) is greatly appreciated
  3. Thank you, I think I will test the memory overnight at stock settings, and again the next night using something like this https://www.patreon.com/posts/low-effort-rank-77403831
  4. @191x7 What is your full PC configuration https://nz.pcpartpicker.com/list/t7H8wg What windows version are you using and are they updated? 11 Pro, up to date How are your CPU, MBO and GPU temperatures in idle and under load? Excellent Using the latest Motherboard Bios? F21 Latest non-beta BIOS Latest chipset drivers downloaded from AMD / Intel? Chipset downloaded from MoBo vendor Disk drive health OK? Yes Latest SSD firmwares on the SSD-s? None Available Latest GPU drivers? Yes Latest GPU vBIOS / firmware? Yes RAM running XMP (DOCP)? Tried XMP off? EXPO enabled, now testing disabled Tested the RAM with Memtest86? In progress Does the same happen with a benchmark tool like 3DMark? In progress How about Cinebench R23, Unigine heaven? In progress Stress test applications work OK (OCCT, Prime95, ...)? No issues w/ gaming or OCCT Have you done any tweaks like disabling MultiPlane Overlay MPO? None Does the Windows Reliability Monitor tool show issues? Yes Do you know the steps to reproduce the issue or what you changed before the issue appeared? No Do your 3DMark Firestrike and Timespy score differ a lot from other comparable systems? In progress Have you tried replacing any hardware? No Tried some of the hardware in another system? No Tried running sfc /scannow in command prompt / powershell / Termional? No, fresh windows install Any other troubleshooting steps you've tried? Not yet, here seeking advice & experience w/ AM5 & memory
  5. Suppose it's time to disable EXPO and run some memory tests to find out
  6. Latest non-beta bios F21, and yes Windows 11 pro is all upto date
  7. Just finished this AM5 build, and I'm getting infrequent & unrepeatable BSOD! Any advice is appreciated Parts List https://nz.pcpartpicker.com/list/t7H8wg Minidump files https://files.catbox.moe/3p33p1.zip Zentimings https://cdn.imgchest.com/files/j7mmc8rzo57.png First crash was while clicking restart in the start menu Second crash was just watching someone stream in discord No errors with TM5, Karhu, OCCT, y-cruncher All software and bios upto date
  8. So I've come to possess this used Great Wall E750 PSU, which has none of the original modular cables. Normally I would ask around for compatible models/cables and move on. I've been in this position before and want to ask: 1) Is anyone familiar with the pinouts of this model, specifically the EPS connector for GPU 2) Can I simply probe each socket of a mysterious PSU with the PC on, and expect to get to get readings on the multimeter without causing any damage If I'm missing something obvious please let me know. It would be nice to determine the pinout of an unfamiliar PSU without any kind of reference
  9. This board doesn't have any kind of RGBsync, and I thought they looked good for $20! I don't know enough about power supplies to say if its possible for a component to cause some kind of irregularity in power output. I'm curious about the mobo/bios and its asus EPU power saving mode, Intel's EIST and similar features too KH9JKKW.mp4
  10. Its UpHere RGB123-3 from amazon. The fan/hub was my first suspicion, and they sent me a second set for the sake of troubleshooting. Only later I realized the original and replacement pack work flawlessly outside of this one trouble system. Leaves me wondering if its possible for my mobo/front panel/gpu/anything to alter the output from my PSU
  11. The problem persists It does include its own remote and fan hub thats powered by sata (fan is not powered by direct sata connection). Strange that it doesn't happen with any of my other desktops, and only after windows launches. I replaced the PSU, fan, fan hub & remote, but any combination of these things connected to my microATX board has issues.
  12. I'm going mad trying to troubleshoot something. I have a rgb fan that will flicker or change color intermittently only after the computer has booted into windows. The fan runs off a sata power cable and does not connect to the motherboard. I've replaced the fan and the PSU but the problem persists. Can anyone tell me, will software like bios or windows affect the output of my PSU on this lone sata power cable? The fan works properly in other machines
  13. Well now I'm confused because pcpartpicker has it listed as GX-550, but amazon uses GX-550 and SSR-550FX in the same description https://pcpartpicker.com/product/3H2bt6
  14. Someone in the anandtech thread linked earlier opened a similar Aigo fan and seems to think the pins are: (4 for LED) +, Din, GND, Dout (2 for Fan) +, GND Hopefully just testing and connecting the 2 fan wires to my controller will work out I'm not sure if those JST pins will pop out and snap into a standard fan connector without fiddling around, but I will have to find out
  15. The SeaSonic Focus 550 W 80+ Gold Certified Fully Modular ATX Power Supply (FOCUS-GX-550)
×