Jump to content

deadxsensei

Member
 View Profile  See their activity

  • Posts

    72

  • Joined

  • Last visited

 Content Type 

Everything posted by deadxsensei

  1. deadxsensei
    not everyone has money to spend at the time.
  2. deadxsensei
    Ignoring the prices that these cards are going for, do you guys think the 3060 is worth buying? It's the only card available where I am so I'm contemplating buying one or waiting for the 3060 Ti to be back in stock. Pls help me decide, i'm so confused. I'll be using it to game at 1080p with high settings and 60fps hopefully. Not planning to upgrade to 1440p.
  3. deadxsensei
    i'll check them out, thanks
  4. deadxsensei
    ohh i see, i get so confused and scared i might buy a wrong one and three years later it cant run games anymore haha, so thanks
  5. deadxsensei
    So, I'm planning to build a new PC but I'm really confused as to which graphics card to buy. I was thinking of picking up a Gigabyte GeForce RTX 2080 SUPER WINDFORCE OC 8GB GDDR6 cause that seems to be the only one I can find. If i get that, will it last me till the end of this gen for 1080p gaming? Aiming for 1080p 60fps at high settings. Or should I just wait until I can find a 3060ti?
  6. deadxsensei
    here is the bios, it doesnt say that im running in dual channel & whwhen gaming the RAM only goes up to 1750mhz
  7. deadxsensei
    yes, im using msi afterburner and when im in game i shows Memory : 1750mhz, the gpu is at 1350mhz.
  8. deadxsensei
    I can't seem to get dual channel to work on my build. I have enabled XMP in the bios. But when I check on the main bios page it doesn't say that i'm on dual channel (like on this screenshot) it shows both the RAM sticks but it doesn't say dual channel. I'm running a ryzen 3 2200g, hyperX fury RAM 2666mhz 2x8GB and a Asrock a320m hdv r4 mobo. The board supports dual channel I've checked. The bios has been updated as well. The RAM is also running only at 1333mhz when i check on cpu-z. When playing GTA V the RAM maxes out at 1750mhz. Is that normal? I can barely keep 30fps. Specs: Ryzen 3 2200G Asrock A320M HDV R4 mobo RX 570 4gb HyperX fury 2x8GB 2666mhz coolermaster masterwatt 550W Western digital ssd 256 boot drive 1TB western digital HDD Please help
  9. deadxsensei
    I have one extra stick of RAM but its not a hyperX one. I tried using it along with the hyperX with XMP disabled, both were running at 2400mhz. There was no difference in performance. Should I just by another hyperX stick?
  10. deadxsensei
    so back to square one. Im so close to throwing this thing out the window.
  11. deadxsensei
    ive done all this and still the same. XMP caused my games to crash so i disabled it. So i'm back to square one. sigh
  12. deadxsensei
    i see, so should i just get another stick and use dual channel?
  13. deadxsensei
    i enabled xnp and the Memory frequency switched from auto to 2666mhz and now my games keep crashing.
  14. deadxsensei
    this did not work at all.
  15. deadxsensei
    where can i find that setting?
  16. deadxsensei
    yes i am 100% sure the monitor is plugged to the gpu.
  17. deadxsensei
    Please help, I don't understand why my PC is underperforming so much. My cinebench score is 1311 which is pretty close to the other systems of the same specs in the results which is 1344. I also checked gpucheck. com and it shows that my build should have no problem running games like battlefield 1 at 1080p. However my PC can barely run it, the game is barely playable, i get around 25-30fps at 1080p, even on low settings the game is not playable. I have tried different version of drivers with no improvement at all. Even GTA V which is a pretty old game by now struggle to reach 60 fps at high settings and sometimes dipped to 27-30. Even league of legends, a game that should run on onboard graphics can barely stay constant 60fps on my pc. In most of the games i've tried my cpu usage is constantly 100% except for league of legends. I've been told that it could be because i'm running a single channel RAM is that true? Could that really cause my PC to run games this badly? And some say that my CPU is the problem, so should i upgrade to a ryzen 5 2600 and dual channel RAM? please help! Specs: Ryzen 3 2200g Asus ROG Rx 570 4GB HyperX Fury 8GB single channel Asrock a320m-hdv r4.0 Coolermaster Masterwatt 550W 256GB western digital SSD (boot drive) 1TB HDD western digital Edit: Yes, my monitor is plugged to the GPU not the onboard hdmi port.
  18. deadxsensei
    do you know what could be cause it to underperform so much?
  19. deadxsensei
    xmp is enabled yes. Edit: I enabled it but on the "Memory Frequency" option i left it on Auto.
  20. deadxsensei
    So the cpu is bottlenecking my gpu?
  21. deadxsensei
    Sorry I’m a newbie to all this. I meant I borrowed the ram from my friend cause he has the same one, so I had to give it back. My cpu temps when gaming is around 70°C and my gpu is 50-60°C. The cpu usage when gaming is 100% but the gpu usage is barely reaching 60%
  22. deadxsensei
    it is plugged to the gpu.
  23. deadxsensei
    single, i tried dual but it didn't really help.
  24. deadxsensei
    I got this PC last year, usually i only play league of legends so performance was always good. But recently i tried playing battlefiled 1 and it was literally unplayable, it can barely reach 30fps. GTA V is also getting really bad fps, around 30-45fps. My drivers are up to date. I just can't figure out whats wrong. Please help Specs : mobo - asrock a320m-hdv r4.0 Graphics card = Asus ROG Rx570 4GB RAM - Hyper Fury X 8GB HDD - 1TB Western digital SSD (boot drive) - 256GB PSU - Cooler master Masterwatt 550W
  25. deadxsensei
    Hi , planning to move my build to a small portable case , can you guys suggest me one? Along with the psu that will fit it? I’m planning to use the same components except for the psu. Current specs: Asrock A320m hdv R4.0 asus rog rx 570 coolermaster master watt 550W fury X ddr4 8gb 512gb SSD western digital thanks!
×