Marty6IX

I’ll have to check when I get home for the direct wired connection to the modem, but is there any reason why the upload speeds are so poor? With my other google Wi-Fi mesh the uploads&downloads were about 100-200. Is there maybe a setting I need to enable or should I contact my ISP

Hello, I've been meaning to upgrade my home network, I've been using Google's Wi-Fi mesh network for about part of 2 years now, but I faced a lot of maintenance issues with them (wi-fi & Lan speeds dropping etc...) and so after 2 years and 2 unresponsive hubs I decided to look for a new networking solution. So after watching the recent Short-Circuit YouTube video on the ASUS Zen WIFI Pro ET12 Router I decided It would be a suitable replacement and the reviews where great on it so I decided to pull the trigger. It's been 2 weeks after installation of the New Wi-Fi mesh system, my WIFI speeds are absolutely Amazing! I'm getting almost 800 GB/s on downloads and about 300 MBPS on uploads but on the other hand my Lan speeds are horrible! I'm receiving about 1 GB/s on downloads (Amazing) but receiving 1-5 MBPS on upload speeds (Bruh). I've tried countless network restarts, entire modem & mesh resets, new land cables and numerous devices. I'm absolutely stumped and have no idea what todo. Somethings about my network: Verizon Fiber Gigabyte plan 4 different Mesh points around my home. I do require LAN connections for some equipment in my home like the camera systems so it's crucial to have at least decent upload speeds over LAN. I would greatly Appreciate any help/Suggestions. Thank you! I've attached some screenshot's for reference.

Thank you man, you’re a great help I appreciate it

Hey sorry for the late response I’ve been a bit busy, but there is no price range I have a few friends that work in the retail space so I can always get a good deal. Again thanks for the help I appreciate it. I looked at the ROG CROSSHAIR Viii is that one good?

Hey, Thank you so much that was the issue, I am/was occupying the second M.2 slot, I removed it and it now it's working. Do you have any Motherboard recommendations that will allow me to use both M.2 slots while using 2 GPU's? If so I would greatly appreciate any if all recommendations.

Hello Guys, I recently installed a second GPU in my build because I didn't have enough Display ports, I installed it, plug in the 8 pin power and booted up my PC but to my surprise there is no signal coming out of the second graphics card, The fans are spinning but I'm not sure what is the issue. I have checked Device manager and the Card does not show up, I have also check my bios and it doesn't show up either. I'm not sure what other steps I can take to troubleshoot this, hopefully some here has encountered this issue before. Thanks in advance. This is my current build: Ryzen 9 5950x MSI B550 Edge WIFI Nvidia RTX 3070Ti (Primary GPU) Nvidia GTX 1660 S (Secondary GPU) EVGA 1000 Watt 80G Thanks!

Hello, I've been looking for videos to help me solve this issue but can't find any that help. I'm trying to get into streaming and want to use a Dual streaming setup but I'm running into frame errors while streaming or recording. I'm offloading all the streaming and video encoding onto my second PC but my Primary PC has been having trouble with OBS maintaining a 60FPS output signal. This is pretty much how I have it going PC1----->Elgato----->PC2 The problem is that PC1 in obs is sending >60FPS to Elgato---> PC2 I have all the correct drivers installed I just think its a problem with OBS idk what todo here is some footage skip to 46 secs

Hi thanks for the quick response, we actually ended up finding the correct cable, thanks for the help, I guess that’s what happens when you try and finish a build at 3am . Thanks again goodnight!

Hi we’re using an EVGA 1000 G+ Supernova

Hi we’re using an EVGA 1000 G+ Supernova

Hello, so I’m helping my brother finish his build and he got his hands on a GeForce RTX 3070 from Tuf Gaming, we ran into a problem where the GPU needs a power supply cable that’s 8x2 Pins but his Powersupply only has 8x1 cables, so the question is can we use 2 of the 8x1 cables? Or will this fry the board and GPU, thanks.

I built my first PC entirely from Walmart at the start of the pandemic and the parts were really good so I thought I’d do the same for my brother and it turned out like this

So the box didn’t come sealed and there’s no sign of physical damage but the board it’s self was sealed, it came with the “grease”/ dark spots that don’t wipe off and it looks dusty

Sorry, for the bad video I shot it in 4K but the file size was well over 300mbs I had to compress it and it lost some details, but I bought it from Walmart directly it was shipped and sold by them