Hello there, I'm having problems with 10gbe, I recently purchased a Synology NAS 1819+ with the dual 10gbe network card from Synology, I also purchased the Synology single 10gbe port thinking it would work out of the bat in the computer, results it won't, even if it said that it was Windows 10 supported, I worked around this finding out the chip this single port card uses is Aquantia so I downloaded these drivers and my card was recognized, now, my Nas has 4 x 12TB seagate Firewolf Pro in SHR with 1 fault disk tolerance. And the rest is 1 read cache ssd for this array and another Raid 0 of 3x Samsung SSD. 2 Computers are connected to the NAS directly with Cat 8 cable. Results I do an iperf test and my speeds won't go over 5gb/s on one computer, and 3gb/s on the other. Asuming the PCI port speed is in play, I know one is running at 4x and the other computer at 8x, but its never reaching more than those 3gb/s or 5gb/s, I have enabled Jumbo Frames and everything. These are my speed test on write and read. Should I be looking at something better? Will I get better speeds if I change my network cards on the computers? I have seen people getting way higher speeds with spinning disks.
Thanks
SSD Raid 0 | Speeds 769.0 Write / 607.8 Read
SHR 32TB | 442.3 Write / 308.3 Read
