Jump to content

Envious Mods

Member
  • Posts

    46
  • Joined

  • Last visited

Reputation Activity

  1. Like
    Envious Mods got a reaction from FakeGamerGuy in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    It Comes to an End:

    I can't thank you all enough who have supported the "Replicant" case mod. I'm amazed at the amount of support and positivity that has been shared with me. This competition was quite the journey and seeing Replicant finished; I know the extremely long hours were worth it.

    I manged to push myself further than i ever have before while assuring that every piece is clean looking and achieved at my high standards. I pulled off my goal to touch every single piece and mod it in one way or another. Everything was done in house and with my own hands; the end result is something I'm extremely happy with. Thanks again and make sure to place your vote!

    ••Make SURE to VOTE for the Replicant CaseMOD Invitational build••
     


    Thank You to our Sponsors!
    Thermaltake - ASUS - AMD  - Plextor - Gskill - ROG - Luxa - TT Esports

    A massive thank you goes out to our Sponsors as the Replicant case mod wouldn't have been possible without them! Thermaltake also did a great job helping us all out with anything we needed. They have some wonderful employees that truly love the sport of Competitive Modding!

    Hardware Specs:

    Motherboard: Asus X470 Crosshair VII
    CPU: AMD Ryzen 2700
    Graphics Card: Asus Strix GTX 1070
    Ram: Gskill RGB TridentZ DDR4 (16gb)
    Storage: Plextor 512gb NVM PCIE SSD
    Power Supply: Thermaltake iRGB 850w
    Cables: Lian Li Strimer & Thermaltake black and white sleeved extensions
    Fans: Thermaltake 120mm Trio RGB, Ring Plus & Pure Plus.
    Accessories: TT Lumi Plus addressable leds strips, 5" touch screen monitor, vandal switch

    Watercooling: Thermaltake D5 dual pumps, 4 X reservoirs, 480mm copper radiator, 4 X 120mm radiators, Pacific W4 Plus CPU block, GPU waterblock, 2 digital led controllers, Sync controller, 2 X inline digital temp sensors and white 16mm C-Pro fittings

    Final Photos & (Video Coming soon):

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

  2. Like
    Envious Mods got a reaction from Zando_ in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    It Comes to an End:

    I can't thank you all enough who have supported the "Replicant" case mod. I'm amazed at the amount of support and positivity that has been shared with me. This competition was quite the journey and seeing Replicant finished; I know the extremely long hours were worth it.

    I manged to push myself further than i ever have before while assuring that every piece is clean looking and achieved at my high standards. I pulled off my goal to touch every single piece and mod it in one way or another. Everything was done in house and with my own hands; the end result is something I'm extremely happy with. Thanks again and make sure to place your vote!

    ••Make SURE to VOTE for the Replicant CaseMOD Invitational build••
     


    Thank You to our Sponsors!
    Thermaltake - ASUS - AMD  - Plextor - Gskill - ROG - Luxa - TT Esports

    A massive thank you goes out to our Sponsors as the Replicant case mod wouldn't have been possible without them! Thermaltake also did a great job helping us all out with anything we needed. They have some wonderful employees that truly love the sport of Competitive Modding!

    Hardware Specs:

    Motherboard: Asus X470 Crosshair VII
    CPU: AMD Ryzen 2700
    Graphics Card: Asus Strix GTX 1070
    Ram: Gskill RGB TridentZ DDR4 (16gb)
    Storage: Plextor 512gb NVM PCIE SSD
    Power Supply: Thermaltake iRGB 850w
    Cables: Lian Li Strimer & Thermaltake black and white sleeved extensions
    Fans: Thermaltake 120mm Trio RGB, Ring Plus & Pure Plus.
    Accessories: TT Lumi Plus addressable leds strips, 5" touch screen monitor, vandal switch

    Watercooling: Thermaltake D5 dual pumps, 4 X reservoirs, 480mm copper radiator, 4 X 120mm radiators, Pacific W4 Plus CPU block, GPU waterblock, 2 digital led controllers, Sync controller, 2 X inline digital temp sensors and white 16mm C-Pro fittings

    Final Photos & (Video Coming soon):

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

  3. Like
    Envious Mods got a reaction from Zando_ in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Final Assembly:
    It's my favorite time of any case mod; final assembly! I'm doing some of the final stuff in a bit different order than usual. I'm waiting to put on the two side shrouds until after leak testing so I can see all the watercooling fittings and connections. I was a letter to snag a few pics during the process. I still need to play with the dye a little to get the exact shades I want.


    All Booted Up!
    The moment of truth........when you flip the full power switch for the 1st time. It took me an hour just to flip the switch for the 1st time. It's that moment when it'll all be good or really bad. Fortunately it all went well.

    Installing Windows 10 was a breeze on the Plextor M9Pe PCIE SSD. It was definitely one of the fastest installs I've done. After that it's time to install all the Asus utilities and drivers for the X470 Maximus Crosshair VII wifi + STRIX GTX 1070 gpu. Next up was installing the software for Thermaltakes new RGB software (V2.2). It took a bit to figure out at 1st but I got the hang of it after swapping around a couple things.

  4. Like
    Envious Mods got a reaction from Zando_ in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Invitational Badge:
    I fealt it was only proper to make a Thermaltake CaseMOD Invitational badge for the cable management setup on the Replicant mod. I designed it from the ground up since I've been having some software issues. Took a lot more time but I like the way it came out so it's well worth it.
     


    Front Acrylic:
    Originally I didn't plan on making custom front pieces. I did however make a few acrylic pieces that make up the front but didn't originally design pieces to go around the front fans. Once I started disassembling and reassembling the front I decided that I really needed to make something to go around the fans even though they really wouldn't be seen much. I spent hours designing and redesigning a new front fan shroud. After many redesigns I came up with a great 1.



    Leak Testing: (video)
    I always go through a basic check list before leak testing. Making sure all the adaptors, tubes and fittings are tight is important to eliminate the potential for small leaks. The most common leak I come across is from not tightening an adapter or fitting all the way. Usually if I have time I'll fill the entire loop with coolant or distilled water without powering up the pump. Most of the time this isn't doable because most loops require you to power up the pump to fill the 2nd half of the loop. I design my loops so it usually isn't requured. This allows me to let the loop sit overnight  before powering up the pump. It's not a required measure but make easier for me.
    VID_239520312_040004_935.mp4
     

  5. Like
    Envious Mods got a reaction from Rosinbole in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Wiring Mockups of Cable Management:
    I've done all the final work to the rear cable management parts. I want to wait to finish the rear wiring to the Thermaltake controllers so I can program it through the software. Once I have it in order I can assemble the controller mounts. I'll also add the shrouds after leak testing. Having them off gives me better access to the build to check for leaks.
     

  6. Like
    Envious Mods got a reaction from Rosinbole in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Drain Ports:
    Drain ports are an important part of any system. I've decided to put mine at the pump outlet which is at the bottom of the system. Once I have a chance to leak test and drain I may add another access port but this should work to get the majority of both loops drained. I wanted to add a custom made acrylic panel that holds the drain ports in postition. This is primarily for aesthetics as it keeps both ports in position and also gives it a Blade Runner look. I will paint them flat black before final assembly.




    Attempt at Programming Thermaltake Addressable RGB Products:

    I still need to do more research to learn how to properly program all these RGB products. If your just doing a few items it's pretty straight forward. I decided to do just about every product they own which makes it much more complicated. The reason it's more difficult is because I'm linking multiple controllers and running part of them off the Asus motherboards software through Thermaltakes new Sync controller.

    So far I've got the 4 Ring Trio Fans and the Ring Plus Fan setup as well as the Lumi strips. The cool part about running some RGB devices through the Thermaltake SYNC and others through the Plus controllers is the ability to create different looks and effects. I plan on doing a video to show some of the features and voice control via an android phone. You can check out the different patterns I tried as well (video)
     
    VID_120061207_021454_271.mp4
  7. Like
    Envious Mods got a reaction from Zando_ in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Running All That Wiring:
    Now that I have the hardline tubing run its time to start dismantling the psu shroud so that I can run all the wiring. There's more wiring in this build then most due to all the RGB I decided to use so that I can get the Blade Runner look I'm going for. Fortunately I pre-planned some of the cable routes so it'll all fit cleanly within the custom cable management piece I built.


    Custom Envious Mods GPU Insert:
    I noticed a little pocket in the Thermaltake gpu block where the power plug goes so I decided to custom make an Envious Mods logo that is a perfect fit. The cool part is that I can swap in and out other ones for shows etc.



  8. Like
    Envious Mods got a reaction from Rosinbole in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Running All That Wiring:
    Now that I have the hardline tubing run its time to start dismantling the psu shroud so that I can run all the wiring. There's more wiring in this build then most due to all the RGB I decided to use so that I can get the Blade Runner look I'm going for. Fortunately I pre-planned some of the cable routes so it'll all fit cleanly within the custom cable management piece I built.


    Custom Envious Mods GPU Insert:
    I noticed a little pocket in the Thermaltake gpu block where the power plug goes so I decided to custom make an Envious Mods logo that is a perfect fit. The cool part is that I can swap in and out other ones for shows etc.



  9. Like
    Envious Mods got a reaction from Rosinbole in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Testing Out Ring Trio & Ring Plus Color Schemes:
    Before I pulled it apart to do wiring I wanted to test out different color schemes to see if I wanted more white or more purple. It always looks different on camera. After a couple shots I could quickly tell that it looked better with more purple. Once finished there's a lot more leds that will be used in different colors but this gives me a good idea of what it'll look like.
     






    GPU Distrobution Block:
    I've always wanted to make my own distrobution block that's a bit different from what I've seen. I had one on my Dark Matter scratch build that was done about 4 years ago. I decided to take advantage an design a custom distrobution block to link the GPU to the pump. I'm working on a bolt together distrobution block method but for this application is decided to do a sealed unit. It is about an inch thick which will offer up more than enough flow. An internal piece was added to promote proper flow and reduce unwanted turbulence.



  10. Like
    Envious Mods got a reaction from Zando_ in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Testing Out Ring Trio & Ring Plus Color Schemes:
    Before I pulled it apart to do wiring I wanted to test out different color schemes to see if I wanted more white or more purple. It always looks different on camera. After a couple shots I could quickly tell that it looked better with more purple. Once finished there's a lot more leds that will be used in different colors but this gives me a good idea of what it'll look like.
     






    GPU Distrobution Block:
    I've always wanted to make my own distrobution block that's a bit different from what I've seen. I had one on my Dark Matter scratch build that was done about 4 years ago. I decided to take advantage an design a custom distrobution block to link the GPU to the pump. I'm working on a bolt together distrobution block method but for this application is decided to do a sealed unit. It is about an inch thick which will offer up more than enough flow. An internal piece was added to promote proper flow and reduce unwanted turbulence.



  11. Like
    Envious Mods got a reaction from Zando_ in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Painting 90 Degree Fitting Caps:
    Since I'm using Thermaltakes new C-Pro white fittings I wanted to match the caps on the 90 degree ones that come in black or chrome. Once painted white they'll match the rest of the loop. I could have easily not painted then but I like to try and match up everything in the build. I tried a new Universal Bonding Primer since fittings get a lot of wear and tear. This should help give a good platform for the paint to grab on to. I will probably clear them with a matte or dead flat clear coat as well.


    Custom Front Switch Panel Mods:
    I could have left the top USB, headset and power switch that comes on the case but, it's a mod competition. So I went full on custom and molded it into the custom panels I built for the top. I added an anti-vandel switch to turn on the PC as well as a custom acrylic Replicant to it which does a great job of tying it all together.
     
    The tiny letter that make up the Replicant logo were very hard to do. Upgrade used the negative acrylic pieces to help keep it aligned as I chemically welded it together. The switch is a halo ring so it'll illuminate white when the system is powered. I'm going to save this part to unveil in the final photos; coming soon

    DIY Fitting Cap Covers:
    The 2 caps on the gpus waterblock are on the outside and inside wanted to do something to give them a sharper look. I tried etching the acrylic which looked great from the back but wasn't up to my standards. I then came up with the idea to etch the Thermaltake and Envious Mods logo mirrored so I could flip them over which gives a more polished look. I'm also playing around with custom Blade Runner caps for the reservoirs. I haven't got them just right yet but I'll redo them until they're perfect.



     
    Sneak Peek on Next Updates!

     


     
  12. Like
    Envious Mods got a reaction from Zando_ in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Custom Mixed Coolant Ideas:
    I rarely use standard colors when deciding on coolant choices. Thermaltake makes a clear C1000 coolant and offers up a large variety of dyes to make your own colors or tint pre-made colors. The color for the GPU loop will be purple. I added a touch more blue to get the tint I wanted. For the cpu loop I've been playing with all sorts of ideas from turquoise to lime green, pink and even a more violet/red color. The advantage of going with something like lime green is that it will make the build really pop. The pink and purple really fit the Blade Runner 2049 theme though.




    Running 16mm PETG Hardline Tubing:
    Deciding how you run the hardline loop can make or break a build. I'm very particular when it comes to making a loop that fits the theme, layout, design and that the bends/runs are perfect. I've been known to completely redo a loop if it's not exactly what I'm looking for. I want this one to have a semi-industrial look whither some angled tubes. Since I'll be doing lots of precise bends I decided to use Thermaltake mandrels and so far they've worked great. I still have more tubing to run but I've got the main features finished.



    Finishing up GPU Mods:
    I decided to swap the purple ROG logo for a matte black one that gave it a more cohesive look. It'll also look much better once the gpu is powered up due to the backlights. I can't wait to fire it up!

  13. Like
    Envious Mods got a reaction from TVwazhere in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Custom Mixed Coolant Ideas:
    I rarely use standard colors when deciding on coolant choices. Thermaltake makes a clear C1000 coolant and offers up a large variety of dyes to make your own colors or tint pre-made colors. The color for the GPU loop will be purple. I added a touch more blue to get the tint I wanted. For the cpu loop I've been playing with all sorts of ideas from turquoise to lime green, pink and even a more violet/red color. The advantage of going with something like lime green is that it will make the build really pop. The pink and purple really fit the Blade Runner 2049 theme though.




    Running 16mm PETG Hardline Tubing:
    Deciding how you run the hardline loop can make or break a build. I'm very particular when it comes to making a loop that fits the theme, layout, design and that the bends/runs are perfect. I've been known to completely redo a loop if it's not exactly what I'm looking for. I want this one to have a semi-industrial look whither some angled tubes. Since I'll be doing lots of precise bends I decided to use Thermaltake mandrels and so far they've worked great. I still have more tubing to run but I've got the main features finished.



    Finishing up GPU Mods:
    I decided to swap the purple ROG logo for a matte black one that gave it a more cohesive look. It'll also look much better once the gpu is powered up due to the backlights. I can't wait to fire it up!

  14. Like
    Envious Mods got a reaction from Rosinbole in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Custom Mixed Coolant Ideas:
    I rarely use standard colors when deciding on coolant choices. Thermaltake makes a clear C1000 coolant and offers up a large variety of dyes to make your own colors or tint pre-made colors. The color for the GPU loop will be purple. I added a touch more blue to get the tint I wanted. For the cpu loop I've been playing with all sorts of ideas from turquoise to lime green, pink and even a more violet/red color. The advantage of going with something like lime green is that it will make the build really pop. The pink and purple really fit the Blade Runner 2049 theme though.




    Running 16mm PETG Hardline Tubing:
    Deciding how you run the hardline loop can make or break a build. I'm very particular when it comes to making a loop that fits the theme, layout, design and that the bends/runs are perfect. I've been known to completely redo a loop if it's not exactly what I'm looking for. I want this one to have a semi-industrial look whither some angled tubes. Since I'll be doing lots of precise bends I decided to use Thermaltake mandrels and so far they've worked great. I still have more tubing to run but I've got the main features finished.



    Finishing up GPU Mods:
    I decided to swap the purple ROG logo for a matte black one that gave it a more cohesive look. It'll also look much better once the gpu is powered up due to the backlights. I can't wait to fire it up!

  15. Like
    Envious Mods got a reaction from Rosinbole in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Thank you. Always happy to have another along for the ride!
  16. Like
    Envious Mods got a reaction from Rosinbole in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Thermaltake D5 Pump Mods:
    I've already custom sleeved the wiring from D5 pump but, I wanted to also make some custom plates since I'm showing the back of the pumps. The design I came up with not only fits the theme of Blade Runner 2049 but it ties it into the rest of the build. The acrylic I used is matte black which gives it an original look. I custom cut purple vinyl to go behind the inserts so the it has some contrast.

     
    Gskill TridentZ RGB Ram Mods:
    I decided to do some mods to the Gskill RGB TridentZ DDR4. I've done custom paint before but I wanted to do something I've never seen done that'll also fit the Blade Runner 2049 theme. I made an acrylic insert and etched a Gskill logo which when lit up it'll look like the neon signs found within the movie.
     


    Thermaltake Pacific 10xx Asus Strix GPU Waterblock Mods:
    One of my goals for this build is to make it all look like 1 cohesive design. I could have left the waterblock stock as it already looks sweet but, I had to make it my own. I also wanted to use some special matte acrylic to give it a more industrial look. I couldn't be more happy with the mods for the waterblock and I can't wait to see what it looks like once the block I'd backlit.


  17. Like
    Envious Mods reacted to Rosinbole in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Holy shit... Subbed!!
  18. Like
    Envious Mods reacted to RuffRuffmcgruff in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    This is getting better with each update!
  19. Like
    Envious Mods got a reaction from RuffRuffmcgruff in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Finishing up Plextor M9Pe Mods:
    Now that all the acrylic is glued it's time to paint it all flat black. It looks someone dark in the photos but the interior leds will make it easily viewable once finished. I also decided to custo. The Plextor logo out in white and purple vinyl which brings it all together.


    Mocked up Hardware in Replicant:
    While finishing up the hardware installation I also decided to mock up the Lian LI Strimer RGB Cables. I can't wait to fire these up as they couldn't first a build much better than a Blade Runner 2049 themed build. I also allowed me to make sure I had the best location for the Plextor ssd that I modded. You will be able to see it just as I imagined. It fits the theme and hardware styling very well.

  20. Like
    Envious Mods got a reaction from Zando_ in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Finishing up Plextor M9Pe Mods:
    Now that all the acrylic is glued it's time to paint it all flat black. It looks someone dark in the photos but the interior leds will make it easily viewable once finished. I also decided to custo. The Plextor logo out in white and purple vinyl which brings it all together.


    Mocked up Hardware in Replicant:
    While finishing up the hardware installation I also decided to mock up the Lian LI Strimer RGB Cables. I can't wait to fire these up as they couldn't first a build much better than a Blade Runner 2049 themed build. I also allowed me to make sure I had the best location for the Plextor ssd that I modded. You will be able to see it just as I imagined. It fits the theme and hardware styling very well.

  21. Like
    Envious Mods reacted to Zando_ in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Damn that hardware looks sweet! Also I approve of the hardware choices, I'm running an R7 2700X on an ASUS B450-F (since I'm not overclocking) and it's amazing. Can't wait to see how this all comes together!
  22. Like
    Envious Mods reacted to Zando_ in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Oh dang, the Crosshair mobos are amazing. And lemme know how the Vega 64s perform, I’ve been contemplating saving up for one because IMO they’re just reappy cool. 
  23. Like
    Envious Mods got a reaction from Zando_ in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Thank you very much! Lots of updates coming soon!
  24. Like
    Envious Mods reacted to PrinnyExplodes in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Holy shit is this amazing. Can't wait  to see the finished pictures
  25. Like
    Envious Mods got a reaction from Zando_ in Completed "Replicant" (Blade Runner 2049) CaseMOD Invitational   
    Asus X470 Crosshair VII wifi Motherboard Arrives:
    I've got to say this is a killer looking motherboard. Asus has design cues in most of their products that match my natural design style so it's a good fit. I took the opportunity to start mounting the Gskill RGB TridentZ DDR4 like, AMD Ryzen 7 CPU and Thermaltake W4 CPU block that I've already modded earlier on in the competition.






    Thermaltake GPU Waterblock Arrival & Mods Planned:
    The Series 10 GPU block arrived so that I can start designing the mods for it. These GPU blocks look great right out of the box but I wanted to take it to the next level. To start out I took measurements so that I could start designing the custom pieces that would make up the new plates.

×