EliBone86

High Performance set to never sleep or never turn off power to the monitor.

Build: Graphics: EVGA GeForce GTX 1060 6GB SSC GAMING ACX 3.0 Motherboard: MSI H270 GAMING PRO CARBON LGA 1151 Intel H270 HDMI SATA 6Gb/s USB 3.1 ATX Motherboards - Intel Processor: Intel Core i5-7500 Kaby Lake Quad-Core 3.4 GHz Ram: Crucial 16GB (4 x 4GB) 288-Pin DDR4 SDRAM DDR4 2133 (PC4 17000) Power Supply: Seasonic FOCUS Plus Series SSR-850FX 850W 80+ Gold ATX12V & EPS12V Full Modular 120mm FDB Fan Compact 140 mm Size Power Supply HDD: WD Black 1TB Performance Desktop Hard Disk Drive - 7200 RPM SATA 6Gb/s 64MB Cache 3.5 Inch - WD1003FZEX SSD: WD Black 512GB Performance SSD - M.2 2280 PCIe NVMe Solid State Drive - WDS512G1X0C Case: DIYPC Vanguard-RGB Black Dual USB3.0 Steel/ Tempered Glass ATX Mid Tower Gaming Computer Case w/Tempered Glass Panels CPU Cooler: Cooler Master Blizzard T400 PRO (Red) OS: Windows 10 Home Premium 64-bit This is my wife's computer. It's been having issues in the past where she would go to turn on the computer and it wouldn't power up at all, but we'd switch wall receptacles that it was plugged into to a different receptacle and it would power up. What I personally witnessed yesterday though was: her computer was on, just idling not under load of any sort, she lost video signal the monitor was still on and the computer was still on but signal some how just stopped. That happened twice, then the computer randomly just kind of went to sleep, like everything just turned off and I got up and pressed the power button and it was like it had put itsself into sleep mode. I haven't done anything to address yesterdays issues, at first though I thought it might be the hdmi port on the tv, or graphics card or the hdmi cord that could be causing it to lose video signal like that. However, with all the power issues that have been happening with the computer, I'm thinking that I may have a faulty Power Supply. I'm just here to get some ideas though on a good place to start with diagnosing the problem with this computer. All help is welcome.

Hitting scaled a few times on my remote worked. So now I have a 60hz refresh rate using my tv. Thank you.

Because I game in my living room with my wife. We both have 55 inch tvs, she has a vizio and I have a phillips. HDR is turned off.

I've set scaling to scan the TV is also in PC Mode.

My Build: System CPU Intel Core i5-7500 3.4 GHz LGA 1151 BX80677I57500 Desktop Processor Motherboard MSI B250 GAMING PRO CARBON LGA 1151 Intel B250 HDMI SATA 6Gb/s USB 3.1 ATX Intel Motherboard RAM G.SKILL Aegis 16GB 288-Pin DDR4 SDRAM DDR4 2133 (PC4 17000) Intel Z170 Platform / Intel X99 Platform Desktop GPU ZOTAC GeForce GTX 1080 Ti AMP Extreme Core Edition 11GB GDDR5X 352-bit PCIe 3.0 Gaming Graphics Card VR Ready (ZT-P10810F-10P) Case DIYPC Vanguard-RGB Black Dual USB3.0 Steel/ Tempered Glass ATX Mid Tower Gaming Computer Case w/Tempered Glass Storage WD Black 512GB Performance SSD - M.2 2280 PCIe NVMe Solid State Drive - WDS512G1X0C PSU Seasonic FOCUS Plus Series SSR-850FX 850W 80+ Gold ATX12V & EPS12V Full Modular 120mm FDB Fan Compact 140 mm Display(s) Philips 55" LED 4k UHD 120hz true motion 55pfl5602/f7 Cooling Cooler Master MA610P RGB CPU Air Cooler, 6 CDC Heatpipes, Dual 120mm RGB MasterFan Operating System Windows 10 The problem I'm having currently is that I am running my computer in 1080p and I'm only getting a refresh rate of 30hz. My hdmi cord I believe is 2.0, I haven't tried any other hdmi port on my television. When I do change the refresh rate on my video card to 60hz my screen shrinks down to about the size of a 22inch tv, which in turn means I can't see anything and have to reset it to 30hz refresh rate. If anyone has any information or input I'd really appreciate it.

Does this mean that the first to dram slots are bad on this mobo? Because it's brand new and that would suck if that were the case.

Thank you Rainbow Dash, when I removed the RAM from the slot and turned the computer on the EZ Debug didn't light up at all, so I moved it around a couple of times and finally got it to work. I'm now installing Windows on my NVME WD Black SSD. <3 Thank you again.

G.SKILL Aegis 16GB 288-Pin DDR4 SDRAM DDR4 2133 (PC4 17000) Intel Z170 Platform / Intel X99 Platform Desktop Memory Model F4-2133C15S-16GIS

Build: 16 Gigs of Ram PC17000 DDR4 i5-7500 3.4 ghz MSI B250 Gaming Pro Carbon GTX 1080TI ZOTAC ZT-P10810F-10P GeForce GTX 1080 Ti AMP Extreme Core Edition. I just replaced the motherboard on my computer to the MSI B250 Gaming Pro Carbon. Whenever I start the computer up the EZ Debug LED will blink on the cpu to the dram. Repeatedly.

I ran Furmark and Unigine today on both cards my 1080ti and 1060 and the 1080ti smoked it. But I just can't seem to get it done in life is feudal... If I turn the settings to medium/high custom on Life is Feudal MMO I'll hit around 60-70 fps, but if I want to play high then it's back down to 47-50. Is this normal?

It could be a defective video card though. I bought it off Amazon and they did one of the sketchiest things I've ever seen before. They slapped a packing label on the outside of the manufactures box and shipped it like that with no protection or anything. I only installed it to see if it was working properly, so i may need to contact Amazon and have them exchange my card.

I tried with PUBG as well, using the same configuration as I used on my GTX 1060 with my 1080ti and I was ranging right around the same FPS with the 1080 that I was with my 1060. Here is a picture of my settings for PUBG. Frames ranged between 60-111 on Pubg while in game.

@Princess Cadence I found DDU and installed it. I restarted into safe mode and ran DDU with clean uninstall and restart option. Upon restart I installed my latest GTX driver and also did a clean installation when I installed the driver. I reopened Life is Feudal MMO and was still only hitting FPS of 50 and lower.

Where can I get a link for DDU? I've never been able to find it before.