stenchslash

It seems as long as my router is on and connected via the lan cable to my PC even the PC is off it's working The ONU is not crashing Strange, very strange PS: I might be offline for now but I have given all the info needed to analyze and thank you if someone replies, I will check the thread after i catch up on sleep

there is only one Ethernet port on both router and Gpon and the same Ethernet cable goes to Ethernet port which both devices have only 1

1) yes 2) yes 3) ethernet physically

My GPON ONU Modem Fiber Optic, GPON Port + LAN Port + Reset + Power Port keeps crashing if i disconnect my PC from my router (lan cable) / turn it off Its working perfectly fine otherwise, there was some work done in my LCO part, before that it was crashing all the time, insight please.. we all are confused here... thank you !!

thanks

Yesterday i changed the CMOS, so took apart the armor plating and cleaned it off too, i didn't checked temp before that reason i was making sure

My Ambient is 38 C So is this temp for my motherboard safe / usual i have no clue to motherboard temps ?

Thank you, and now by your answer i have someone else words for it too, it's kinda scary without a second opinion !!

I'm going to buy the DeepCool Assassin II tomorrow and I'm concerned if it will block my rams from using (yes it gets top of my ram slots but) I'm using Hyperx Fury 1866mhz (blue) running on Dual Channel It's 3.8cm tall when i measured from the motherboard so it's not taller than 4cm , (you can find only the ram size too online which is 3.4cm) So my Questions is, can i use the ram without any problem Seems the the Cooler is 4.2 cm from the motherboard (as given on the site) Please reverify the numbers and tell me should i go ahead and buy it or not Thank you so much if someone replies as I'm going in for a purchase about in 12 hours Motherboard - Maximus VII Formula

Yeah just double checked it, nope seems i don't have that option thanks for all the replies

Screens attach above and I'm using 2902, seems that's the latest one over the years

That's the thing it's not there, should i attach a screenshot of the same page from my end ?

So, i changed to adaptive voltage today and the voltage shoots up sometimes depending on the load, so i'm currently looking for IA AC / DC Load Line but can't seem to find it, any help thanks ? Asus Maximus VII Formula

I used Manual mode as its stable and running without any issues on 1.017 thanks guys