In my new build: fx6300 ga-78lmt-usb3(rev 5.0) hyperx blu 1600-4gb cx430v2 zotac gt630 1gb ddr5 320gb samsung hdd After about 1-2 hrs of usage or in games after a while I get bsod with system service exception. Should I downclock the ram.Although the ram is supported in the motherboard ram support list online. If so do i have to change timings as well. I am a complete newbie when it comes to overclocking. Currently I am running on 1066 by manual multiplier in bios with multiplier set to 5.33 and the voltage for ram is set to 1.5v by default. I tried to set it on 1333 with 1.5v but it still gave bsod after an hour of usage. Any suggeston or possible solution would be really appreciated.
For a clearer understanding I am posting the settings from bios: HT Link Freq [auto] 2000Mhz Memory Clock [x5.33] 1066Mhz DDR3 Voltage 1.500V CPU voltage control 1.4250V CPU NB VID control 1.2150V DRAM Config (inside that following settings): DDR3 Timing items [sPD] [Auto] CAS# latency 11T 7T RAS to CAS R/W Delay 11T 7T Min. RAS Active Time 28T 19T TwTr Command Delay 6T 4T
thank you.