BLACKRIPPER

Solved, I put DIMM4 in DIMM2 because HYNIX is on A1/A2 and Samsung is on B1/B2 DIMM3 and 4. Now xmp works just fine, without adjusting. Thanks for your assist @SorryClaire.

BTW, set it to 1,350V and 3200mhz didnt work

Hey guys, recently i´ve noticed my RAM(2 kits of F4-3600C18D-32GVK) is running only on 2133mhz instead of 3600mhz. My cpu is a 5900x and MSI MAG X570 TOMAHAWK WIFI. If I enable XMP nothing happens, after reboot it still says it in bios. Manual set ram speed to 3600mhz result in error (Memory Overclock failed, Press xyz). Can u guys give me a hint, thanks

dd if=/dev/zero of=/mnt/rz8tb/Share/dd.tst bs=2048000 count=6250 12800000000 bytes transferred in 14.444177 secs (886170233 bytes/sec) = 886,170233 MB/s dd if=/mnt/rz8tb/Share/dd.tst of=/dev/null bs=2048000 12800000000 bytes transferred in 7.104799 secs (1801599218 bytes/sec) = 1801,599218 MB/S

still zpool iostat rz8tb rz8tb 21.7T 7.27T 309 56 49.2M 1.16M

yeah canceld it. pool: rz8tb state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(5) for details. scan: scrub canceled on Thu Feb 4 13:19:49 2021 config: NAME STATE READ WRITE CKSUM rz8tb ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/d95120fc-2d84-11ea-ae15-bc5ff44c82fa.eli ONLINE 0 0 0 gptid/dd960459-2d84-11ea-ae15-bc5ff44c82fa.eli ONLINE 0 0 0 gptid/e108d8fd-2d84-11ea-ae15-bc5ff44c82fa.eli ONLINE 0 0 0 gptid/e4f4fd6f-2d84-11ea-ae15-bc5ff44c82fa.eli ONLINE 0 0 0

a bit comes from downloading stuff and mounted via nfs4 on truenas

Ive no clue, whats the command on freebsd to show this? yes youtube-dl a bit

Yes the disk are mounted in truenas root@truenas[~]# zpool iostat rz8tb capacity operations bandwidth pool alloc free read write read write ---------- ----- ----- ----- ----- ----- ----- rz8tb 21.7T 7.27T 309 56 49.3M 1.15M root@truenas[~]# Tested after cancel

Raid Card: LSI SAS 9200-8E Server Dell R620 Service Tag 2WW1KY1 Ram 200gb ddr3 ecc On this server is XCPng as Hypervisor and turenas as vm. The disks are passed through. This pool was once finished, but still slow speed so I started it again. Upgrade hasent been done yet. This pool is around 1,5 Yrs old. Tested with smb copy

My Read Speed is about 15/20 Mbit/s and Write like 300 Mbits. I have no clue since I swapped my raid card and complete system/software. Old system was a 12 gbits sas raid card fom lsi and an i7 4790k with 32 gb. zpool get all rz8tb size 29T - rz8tb capacity 74% - rz8tb altroot /mnt local rz8tb health ONLINE - rz8tb guid 6860128263587254921 - rz8tb version - default rz8tb bootfs - default rz8tb delegation on default rz8tb autoreplace off default rz8tb cachefile /data/zfs/zpool.cache local rz8tb failmode continue local rz8tb listsnapshots off default rz8tb autoexpand on local rz8tb dedupratio 1.00x - rz8tb free 7.27T - rz8tb allocated 21.7T - rz8tb readonly off - rz8tb ashift 0 default rz8tb comment - default rz8tb expandsize - - rz8tb freeing 0 - rz8tb fragmentation 14% - rz8tb leaked 0 - rz8tb multihost off default rz8tb checkpoint - - rz8tb load_guid 14439749273001701884 - rz8tb autotrim off default rz8tb feature@async_destroy enabled local rz8tb feature@empty_bpobj active local rz8tb feature@lz4_compress active local rz8tb feature@multi_vdev_crash_dump enabled local rz8tb feature@spacemap_histogram active local rz8tb feature@enabled_txg active local rz8tb feature@hole_birth active local rz8tb feature@extensible_dataset active local rz8tb feature@embedded_data active local rz8tb feature@bookmarks enabled local rz8tb feature@filesystem_limits enabled local rz8tb feature@large_blocks active local rz8tb feature@large_dnode disabled local rz8tb feature@sha512 enabled local rz8tb feature@skein enabled local rz8tb feature@userobj_accounting disabled local rz8tb feature@encryption disabled local rz8tb feature@project_quota disabled local rz8tb feature@device_removal enabled local rz8tb feature@obsolete_counts enabled local rz8tb feature@zpool_checkpoint enabled local rz8tb feature@spacemap_v2 disabled local rz8tb feature@allocation_classes disabled local rz8tb feature@resilver_defer disabled local rz8tb feature@bookmark_v2 disabled local rz8tb feature@redaction_bookmarks disabled local rz8tb feature@redacted_datasets disabled local rz8tb feature@bookmark_written disabled local rz8tb feature@log_spacemap disabled local rz8tb feature@livelist disabled local rz8tb feature@device_rebuild disabled local rz8tb feature@zstd_compress disabled local root@truenas[~]# zpool status pool: rz8tb state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(5) for details. scan: scrub in progress since Thu Feb 4 12:10:52 2021 8.25T scanned at 5.26G/s, 8.80G issued at 5.61M/s, 21.7T total 0B repaired, 0.04% done, no estimated completion time config: NAME STATE READ WRITE CKSUM rz8tb ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/d95120fc-2d84-11ea-ae15-bc5ff44c82fa.eli ONLINE 0 0 0 gptid/dd960459-2d84-11ea-ae15-bc5ff44c82fa.eli ONLINE 0 0 0 gptid/e108d8fd-2d84-11ea-ae15-bc5ff44c82fa.eli ONLINE 0 0 0 gptid/e4f4fd6f-2d84-11ea-ae15-bc5ff44c82fa.eli ONLINE 0 0 0 ty for your help

Hey guys I would like to create some torrents directly on an Freenas system. Did u have any experiance with that. Thanks for ur help. Edit: I am using qbittorrent

I have blocked all microsoft domains -> so I dont get any Update or send any System Information. But care Updates are important. Update it regular eta every 1-2 Month one evening.

Whats the right way to install Openvpn Client into FreeNas (FreeBSD). I always get this Error when I try to connect: Thanks for ur help. BLVCKRIPPER

Hi I would like to access an admin Interface over the internet. I dont want a Gateway to access the internet. Anybody knows an guide, script, users that could help me. Thanks for ur answer, BLVCKRIPPER

Why would you like spend this much money. You can get this ARCTIC Freezer 33. Its a lot cheaper and still pretty good. It should handle the oc still fine. best regards BLVCK

Thanks for advice on this board. Only heard a little about it and saw the price is pretty low. best regards BLVCK

I can recommend this device https://mikrotik.com/product/crs326_24s_2q_rm It has a bunch of sfp+ ports and 2 qsfp 40 gbit ports. This device needs a bit more knowledge but therefore it cheaper than the competetors best regards BLVCK

I have this switch for user access: https://mikrotik.com/product/CSS326-24G-2SplusRM. This product works fine and is pretty cheap. U can easily buy one from Amazon. best reguards BLVCK

Hi. I would choose this Case :"be quiet! Pure Base 600" and Motherboard ASUS Prime B350-Plus . best regards BLVCK

Hey guys, I am looking for content. Prefer smbv3 or nfs over openvpn. ty BLVCK

Problem identified: bad / wrong NIC in Gaming PC. Im looking to fix it soon. If it doesnt help I have to buy a new / better one. My recent card is :https://www.asus.com/Networking/XG-C100F/ for 50€ on ebay used. Maybe I will buy an Intel Card. BLVCKRIPPER

Hey guys, can someone tell me why the hack i didnt get full 10 gbit speed? Fibers are clean with very loss rx and tx loss. BLVCKRIPPER

Hardware PC1: ASUS (XG-C100F) Hardware FreeNas: Mellanox MCX324A ConnectX-3 40GbE Dual-Port Switch: MikroTik CRS326-24S+2Q+RM Gbic: Rapidcon Multimode J9150A-C Freenas -> QSFP 40gbe -> Switch -> Gbic 10gbe -> multimode cable -> Gbic 10gbe-> PC