ChrisZH

So I need to find out if my stock ddc uses a Liang style too, right?

Hey so I'm trying to find a better pump for my distribution plate for my case. It uses a ddc pump mounted directly to the plate. I was hoping to change the stock one I have over to an ekwb 3.2 elite. I know the mounting holes for the screws are the same, 50x50. From what I can gather the size of the pumps looks to be generally the same as well. But are there height differences with the impellers? I know my d5 has one that sticks out and ddc is more inside the pump. But idk if it will fit on there well, and Bykski doesn't really seem to keen on helping. Is my only option going to be to order it to try it out?

Yea I know this, just makes me scratch my head because the same brand pump I had before was silent at the same percentage speed.

Did you hear the video, that sound is annoying and it's like that at 50% speed

Is there a way I can get rid of the little bubbles that the pump is sucking in and possibly stuck on the impeller?

Any idea why my old pump was silent but this one isn't? On another note my old one was 10w while this one says 15w.

I find it weird that my "faulty" pump made no noise at around the same speed. But when it was at full load it was noisy as hell.

Yea I know ddc is louder than D5. It could very well be that it's cause it's an open air case. This is a new pump, was not run dry at all. My last one if I put it at like 55% it was silent. So not too sure whats going on.

Well I got a replacement pump sent to me. The old one if I put it to 55% was silent. This one is always producing some form of a hum. The loop was just refilled yesterday but wasn't running much until now. That's why I'm wondering if it might be just some trapped air bubbles. Or maybe I just have the pump mounted too tightly? It's on a distroplate. This is a video of how it sounds. VID_20200308_202402.mp4

Is a humming sound normal with ddc pumps? Or could it be air bubbles inside. I see that my distro block has air bubbles that are stuck in the main chamber right before the pump.

Used the same graphite pad as the 5700xt. But yes there is a possible micro surface difference with the HBM2 stacks

Used the same graphite pad as the 5700xt. But yes there is a possible micro surface difference with the HBM2 stacks

Does anyone have a link or know what this washer mod entails. I'm hoping to get some better cooling with my waterblock but I know the contact is not really too good.

I'll try it out later on and see what happens.

I thought AMD wants freesync active with V-Sync on as well. Could it be that my monitor is expecting a DP1.4 connection instead of the 1.2 cable?

V-Sync should be turned off when freesync is enabled?

Yep, and adaptive sync is enabled.

It's minor fps drops, like 2-5fps but feels really laggy. I'm using a 1440p 144hz monitor over DP. I don't know if there's a cable difference between DP 1.4 or 1.2. I monitor with afterburner but I have tried with Radeon monitoring too. Fps stays average over 120 tho. Also I heard on these x570 certain memory timings are difficult and slightly unstable. Could that cause stuff like this?

Thanks, sorry about that! Wasn't sure where to put.

Anyone have ideas?

So when I play games that I have high fps in I get weird stuttering at times. I have a Radeon VII, and a ryzen 3800x. 16gb 3600 cl16 with fabric to 1800. I'm running on nvme drives. The games are like path of exile, grim dawn, lost ark ru. I don't have stutters from what I can tell in games such as The Outer World. Let me know if you need more information.

Well I left CPU at stock, I was gonna lower voltage some but left it alone. I guess I can run RAM at stock since that's all I changed

It's all clean install. But this happens on desktop as well.so confused about what's happening

So I recently just finished my build. Ryzen 3800x Asus rog strix x570-e Trident z neo cl16 3600 16gb Radeon vii Two nvme ssds It's water-cooled It seems games just appear choppy at time, CPU load isn't high nor temperatures. Gpu is usually at 99% and overclocked to 1950/1200. Ram is at DOCP settings. Also sometimes I get q codes for ram issues. I did tests and it passed them for memory testing. Should I raise voltage or something? All drivers are up to date as well. New BIOS version.

So I'm having these different qcodes come up when I boot and restart. Like instead of AA, I get 40 or 30. Are these bad? I've been having problems with memory on this board like other people. I just upped the SOC voltage and it seems to be fine now.