Green_man_5

My Storage server V3, V2 (December 2016) V1 (January 2015) Hardware CASE: Norcotek RPC4224 PSU: Corsair RM-850 MB: Asus X99-A CPU: Intel Xeon E5 2620 v4 HS: Noctua NH-U9DX i4 RAM: 96GB DDR4 2400 GPU: GTX 970 HBA CARD: 9305-24i SSD: 2x Intel 520 series 240GB SSD: Samsung 970 EVO 500GB HDD: 24x 8TB WD Red NIC: Intel X520-DA2 10Gb Software and Configuration: TrueNAS core 12 on mirrored intel 240GB ssd 3 vDevs, each vDev is 8 drives in z2 L2ARC Samsung 970 EVO 500GB 192TB Raw, 120TB Usable Usage: Plex Media storage (server is run on a different box) Edit Videos off it will be used as VM storage well I get NUC cluster sorted Backup: The data is backed up to a few 4TB and 5TB external drives that are only connected during the backup. I plan on using some of my 10x 4TB and Raid card from V2 server and old desktop parts to make a backup server Photo's: will edit with photos later

oh that was from looney's post. i copied and then edited the post but i guess i forgot to remove that part. (I have removed it now)

Hardware CASE: Norcotek RPC4224 PSU: Corsair RM-550 MB: Asus X99-A CPU: Intel Xeon E5 2620 v4 HS: Noctua NH-U9DX i4 RAM: 32GB DDR4 2400 RAID CARD 1: Adaptec RAID 81605ZQ RAID CARD 2: HPT Rocket Raid 2720SGL SSD: Samsung 840 EVO 250GB SSD HDD: 12x 4TB WD Red Software and Configuration: My server is running Windows Server 2016 (thanks to Microsoft Imagine). I have 2 arrays running, the primary consists of 8x 4TB drives in RAID 6 totaling 21.8TB usable. The secondary array is for my old 4x 4TB drives that have some minor errors stopping them being used in the primary array. Usage: My server has 3 main functions: nightly backups for all the PC's in my home Plex server for all my movies and TV series Minecraft server for a few of my friends Backup: The data is backed up to a few 4TB and 5TB external drives that are only connected during the backup. Photo's:

from

i tryed DiskPart and followed this guide http://www.windowscentral.com/how-clean-and-format-storage-drive-using-diskpart-windows-10 no luck didnt change anything thanks anyway

yes it seems to be only 5 WD Red drives that are not detected. all other disks work in any slot ill give the DiskPart a go when i can and report back

i just got my new Adaptec raid card and got all exited to install it only to find that 5 out of the 6 WD 4TB Red dives i have aren't detected by the card. all 6 are detected by windows when they are directly connected to the motherboard with sata cables as well as an older rocket raid card. ive tried different diagnostics on the drive and all coming back as ok including SMART all 6 drives are WD Red 4TBthe FW is 7.9-0 (33023) and the windows driver is 7.5-0 (41063) the cable is a Adaptec I-HDmSAS-mSAS 0.5m Cable - 2281200-R the raid card is attached to the backplane of my norco rpc 4224 case the 1 working drive spins up as soon as it is attached but the other drives dont, they almost seem to be in a low power state as the do more than nothing when powered up no mater what port the working drive is in it works fine but on the same port none of the other drives work, i even tested some old 160GB WD drives and that work as expected the working drive works in all slots where the none working ones dont and all the none working drives work fine when directly attached the motherboards sata or to an older raid card using the same backplane. to me it seems that there is an issue with the raid card detecting the drive not the drive or any of the wiring. some of the drives where even detected for a short time before being lost to the raid card and i have been unable to replicate this. i have been in contact with Adaptec about this issue and they concluded that it is defective, and to RMA it to the reseller. but i want to confirm that i cant do anything to fix it as i had a hard time getting it from the reseller but thats a story for another time, putting it short it took 2 months to get it. i have ordered 2 more WD red 4TB drives to test with and they should arrive next week. anyone have ideas?

I thought it was in North America (USA, Canada) because everything come to North America way before Australia

Source: http://www.gizmodo.com.au/2016/05/youtube-red-is-now-available-in-australia/ Source: https://www.youtube.com/red YouTube Red launched in the US in November 2015 and has now come to us Aussies. Memberships will normally cost AUD$12 a month (the same as play music which is included) but the introductory price will be AUD$10 per month As a current user of Google play music I was pleasantly surprised when I saw the YouTube icon say "YouTube Red" at no additional cost

Rig name: Technovore Cpu: 3770kGpu: 2 Asus GTX 970Ram: 16GB DDR3 1600MHz Score: 6.2

Pocket cast is the best by far. it is $4 though https://play.google.com/store/apps/details?id=au.com.shiftyjelly.pocketcasts

as an Auzzie with FTTH its worth it. copper has had its time and now it should be fibres turn

from

good job guys jamesmilligan5 https://www.vessel.com/videos/LCoY5zfFf https://www.vessel.com/videos/Su_Wqd7Vl