Karmadyota
-
Posts
14 -
Joined
-
Last visited
Recent Profile Visitors
398 profile views
Karmadyota's Achievements
-
Guys need a bit of help here. Supes is my fav. superhero and I want to add that touch to my Desktop. But I don't know where to start. I could find Batman Build log, Green Lantern, Ironman but no Supes. Any Idea or tips appreciated. Would be really good if you post some images for reference.
-
Thanks for the help
-
Gigabyte B360 D3H rev 1.0
-
On a B360 Motherboard if a SATA III based m.2 SSD is installed the SATA1 port Vanishes.. Would the same issue be faced if a PCIe based 'm' keyed nvme is used.. On the m.2 port? Will the SATA1 port remain usable or not?
-
Budget Build, Suggestions Appreciated
Karmadyota replied to Karmadyota's topic in New Builds and Planning
And I have one more concern that. If you use a m.2 ssd that based on Sata III module eats up your sata 1 port... Will that be the same issue with pcie based nvme m.2s -
Budget Build, Suggestions Appreciated
Karmadyota replied to Karmadyota's topic in New Builds and Planning
And I have one more concern that. If you use a m.2 ssd that based on Sata III module eats up your sata 1 port... Will that be the same issue with pcie based nvme m.2s -
Budget Build, Suggestions Appreciated
Karmadyota replied to Karmadyota's topic in New Builds and Planning
That's the problem... Used market is really bad here. And I heard some where, 1060 does the job well at editing HQ videos. -
Budget Build, Suggestions Appreciated
Karmadyota replied to Karmadyota's topic in New Builds and Planning
Hybrid one is mainly for large games?? Although that could be replaced.. By a normal one -
CPU -Intel i5 8500 (coz 8400 isn't hardware patched against Spectre and Meltdown and adding a little money boosts up performances and adds some extra features) -Comparison between i5 8400 and 8500- https://www.intel.in/content/www/in/en/products/compare-products.html/processors?productIds=126687,129939 Mother Board - Gigabyte B360M D3H (rev. 1.0) -Link- https://www.gigabyte.com/Motherboard/B360M-D3H-rev-10 RAM - 2 X CRUCIAL DESKTOP RAM - 8GB DDR4 2400MHz (CT8G4DFS824A) CPU Heat-sink - Antec A30 (will be replacing the 3 Pin fan with a PWN one) - Thermal Paste- Cooler Master MASTERGEL PSU/SMPS -MasterWatt Lite 600W (Cooler Master) -Link- http://www.coolermaster.com/powersupply/masterwatt-lite-series/masterwatt-lite-230v-600w/ - Comparison Between Corsair VS650 - vs - Cooler Master MasterWatt 600 - vs – Antec VP650 - http://www.pctekreviews.com/Reviews/PSU_600.aspx Graphics Card - GEFORCE GTX 1060 FOUNDERS EDITION (Reference Card) - Link- https://www.nvidia.in/graphics-cards/geforce/pascal/gtx-1060/ Case - Corsair Spec-01 Red - Link- https://www.corsair.com/eu/en/Categories/Products/Cases/Carbide-Series™-SPEC-01-Red-LED-Mid-Tower-Gaming-Case/p/CC-9011050-WW - All Fan Mounts are fitted with Corsair Fans for maximum Air-Flow. -Red LED Strips Added Storage - Adata XPG SX6000 256GB -SEAGATE DESKTOP SOLID STATE HYBRID DRIVE 1TB FIRECUDA (ST1000DX002) -SEAGATE DESKTOP HARD DRIVE 2TB BARRACUDA (ST2000DM006) Any Suggestions Would be Much Appreciated Also tell it's good or bad or how could it be better. Also Recommend a budget UPS, could come in handy
-
The heat is not going anywhere in a refrigarator but acc to my diagram i am exchanging heat via something. It's not an isolated environment
-
So overall conclusion?
-
I know in Vacuum things are different and there no way that heat will be exchanged so it ll end up fusing by that heat. But what about high pressure and low pressure.
-
Lower Pressure in Air tends to be more temp. friendly as it cools or heats up much more quickly.
-
What would be the improvements or deterioration of CPU temps in the following situations in an isolated vacuum chamber. 1. High Pressure 2. Normal Pressure/ Moderate Low Pressure 3. Low pressure And in Vaccum cpu's gonna burn hahah Below is a basic diagram of how this things going to happen.
