Sh3ld0r
-
Posts
27 -
Joined
-
Last visited
Recent Profile Visitors
344 profile views
Sh3ld0r's Achievements
-
Well, to be frank. I like the looks.
-
I cool an r5 3600 with a 360 aio. I know when my cpu overheats, and it doesm't. The minimum speed in ICUE is 1950RPM wich is quite excessive. (max synthetic stress temps are around 62c with the fans at min. RPM)
-
I recently bought a Corsair h150i Pro XT and I find the pump to be just a tiny bit too audible. As the pump gets its power thru a Sata power header i was wondering if I could solder a resistor into the voltage leads of a SATA connector, to lower the RPM. I don't see a reason why it wouldn't work, but if you guys got any advice, thanks in advance!
-
I need to move them quite often and can't mount them to the table.
-
144 and 240 is a considerable jump. Obviously it depends on the person but the 6Hz jump from 144 to 150 definitley wouldn't be perceivable. But the main reason is that 144 can be evenly dividet by 24
-
Hey! I have 3 identical looking screens from 2 differend brands in my setup currently. They look completeley the same (exept the logo obviously) but their stands are 3 different ones. For aesthetic reasons i want to buy 3 identical stands (wich probably woul attach via vesa?). But i can only find wall/table mounts or dull cluncky looking vesa stands. I would need a good looking one and dont want to attach the monitors to the wall. Any sugestions?
-
In my region 2x4GB Kits G.Skill Aegis kits brand new can be had for less than 30 bucks.
-
Why dont you go with a cheap am4 Board 8gigs of low speed DDR4 and a ryzen 3 1200? Would be like less than 130$
-
It doesn't let me. Everything is set to auto and I can't change to manual or enter values or add an offset
-
Hey guys! A friend of mine recently upgraded his PC to a Ryzen 5 2600x with 16GB DDR4 3200Mhz on the gigabyte B450M Gaming motherboard. He asked me to do some minor voltage and clockspeed adjustments. Only problem is: I can't change any settings! I can enable XMP wich runs perfectly but all clock/voltage settings are set to auto in UEFI and I am unable to change them. Latest BIOS is installed. I've already reset CMOS and everything. Can anyone tell me what to do? Thanks in advance!
-
Thanks
-
Looks cool I love the corsair aio blocks. I think in my case the pump should be plenty powerful since I'm only swapping the rad and not adding a gpu block and res
-
Yeah, If I remember. Just moved out and blew 3 grand on my drivers licence tho so Im gonna need to save a bit before modding my PC again.
-
Thanks
