Capnspace
-
Posts
27 -
Joined
-
Last visited
Reputation Activity
-
Capnspace got a reaction from The meeks project in The Water Cooling Gallery
Project Suite and Tie
Case: air240
Cpu:i77700k delidded with rockit88 kit applied conductonaut ti cpu die
Also, replaced intels ihs with rockit's beautiful copper ihs. Temps stayed dropped hard after installation.
Gpu: 1080 ti founders edition
Ram: 32gb (4x8gb) corsair vengance lpx 3000mhz cl15
Ssd: Samsung evo 960 1tb
M.2: Samsung evo 960 250gb nvme m.2
Mobo: asrock z270m extreme4
Psu:SeaSonic Electronics PRIME Titanium 650W 80 Plus Titanium Modular Power Supply
Fans: 3x corsair ml120 white
Custom Waterloop
Gpu: ek full cover waterblock
Cpu: ek supremacy evo
Radiators: 240mm ultra stealth black nemesis white radiator & 120mm ultra stealth black nemesis white radiator
Reservoir: Alphacool: 150mm eisenbacher reservoir
Pump: ek d5 pump
Tubing: thermaltake petg (the best tubing known to man. So easy to work with)
Fittings: eK white hardline fittings
Fluid: cl1000 opaque white
Peripherals not shown in pictures:
Mouse: corsair m65 pro
Mousepad: corsair mm800 rgb
Keyboard: corsair k70 rgb rapidfire
Headset: corsair void pro
Monitor: acer predator x34P overclocked 120hz (just bought this baby today )
Back of case tubing: ek zmt matte black soft line tubing with ek soft line fittings and horsepower spout
Custom cable sleeving from mainframe customs
*custom wires ti exact length with custom sleeving.
Also added a custom side panel made of clear acrylic with 1/2" standoffs (painted copper). Lastly, added custom acrylic floor paneling and custom acrylic top paneling with square cutouts to allow air to pass through.
-
Capnspace got a reaction from EKJake in The Water Cooling Gallery
Just added another 1080 ti to the build known as "The Copper Creamery". Waiting for more LEDs to come in for the blocks and for the case but aside from that it is pretty much done. I would like to make a white acrylic mobo tray so that it looks even cleaner but havent had the time to disassemble everything to put a custom tray in. Any comments/suggestions are greatly appreciated.
Thanks!
-
Capnspace got a reaction from SmashinMachine in The Water Cooling Gallery
Just added another 1080 ti to the build known as "The Copper Creamery". Waiting for more LEDs to come in for the blocks and for the case but aside from that it is pretty much done. I would like to make a white acrylic mobo tray so that it looks even cleaner but havent had the time to disassemble everything to put a custom tray in. Any comments/suggestions are greatly appreciated.
Thanks!
-
Capnspace got a reaction from Limecat86 in The Water Cooling Gallery
Just added another 1080 ti to the build known as "The Copper Creamery". Waiting for more LEDs to come in for the blocks and for the case but aside from that it is pretty much done. I would like to make a white acrylic mobo tray so that it looks even cleaner but havent had the time to disassemble everything to put a custom tray in. Any comments/suggestions are greatly appreciated.
Thanks!
-
Capnspace got a reaction from Ninjoma in The Water Cooling Gallery
Redid my bends to make everything look more parallel. What do you think? Posted a before and after. Also added another Samsung 850 evo 1tb SSD. Now total storage consists of:
2x 1tb Samsung 850 Evo SSD's in Raid 0 for games/video editing/storage
1x Samsung 950 Evo NVME M.2 for Operating System
1x 2tb Seagate Barracuda 2.5" for scheduled imaging of my Raid 0 config.
I decided to use Macrium Reflect to schedule Sunday night weekly imaging backups of my Raid 0 2x 1tb Samsung 850 evo drives in Raid 0 to my 2tb Seagate Barracuda. This is for redundancy in the case of a drive failure. Any other suggestions of how to config this are greatly appreciated.
Thanks
-
Capnspace got a reaction from Echo259 in The Water Cooling Gallery
Project Suite and Tie
Case: air240
Cpu:i77700k delidded with rockit88 kit applied conductonaut ti cpu die
Also, replaced intels ihs with rockit's beautiful copper ihs. Temps stayed dropped hard after installation.
Gpu: 1080 ti founders edition
Ram: 32gb (4x8gb) corsair vengance lpx 3000mhz cl15
Ssd: Samsung evo 960 1tb
M.2: Samsung evo 960 250gb nvme m.2
Mobo: asrock z270m extreme4
Psu:SeaSonic Electronics PRIME Titanium 650W 80 Plus Titanium Modular Power Supply
Fans: 3x corsair ml120 white
Custom Waterloop
Gpu: ek full cover waterblock
Cpu: ek supremacy evo
Radiators: 240mm ultra stealth black nemesis white radiator & 120mm ultra stealth black nemesis white radiator
Reservoir: Alphacool: 150mm eisenbacher reservoir
Pump: ek d5 pump
Tubing: thermaltake petg (the best tubing known to man. So easy to work with)
Fittings: eK white hardline fittings
Fluid: cl1000 opaque white
Peripherals not shown in pictures:
Mouse: corsair m65 pro
Mousepad: corsair mm800 rgb
Keyboard: corsair k70 rgb rapidfire
Headset: corsair void pro
Monitor: acer predator x34P overclocked 120hz (just bought this baby today )
Back of case tubing: ek zmt matte black soft line tubing with ek soft line fittings and horsepower spout
Custom cable sleeving from mainframe customs
*custom wires ti exact length with custom sleeving.
Also added a custom side panel made of clear acrylic with 1/2" standoffs (painted copper). Lastly, added custom acrylic floor paneling and custom acrylic top paneling with square cutouts to allow air to pass through.
-
Capnspace got a reaction from joishw in Corsair air 240
Hey all,
I finished my build. I went with the corsair air240. I live in an apartment with my girlfriend and she has her own crafting area, which didnt leave me much room for a computer so I decided to go with a small form factor case and mother board. Ek waterblocks abd fittngs, thermaltake tubing, black nemesis radiators, corsair ml120 fans, delidded liquid metal i77700k, 1080 ti, corsair vengance lpx 3000mhz 8x2 gb ram. I am ALWAYS looking for ideas to upgrade this build. I have an abundance of leftover acrylic, an unused dremel, and an unsatisfiable need to continue to upgrade this build to make it look amazing. I will be doing a motherboard tray with white acrylic that will sit behind the motherboard and will extend the entire back side of the case, to give it a clean white box look. Again just looking for ideas to mod it even more. Please any ideas are welcome. Thanks so much!
-
Capnspace got a reaction from Cyberspirit in Corsair air 240
Hey all,
I finished my build. I went with the corsair air240. I live in an apartment with my girlfriend and she has her own crafting area, which didnt leave me much room for a computer so I decided to go with a small form factor case and mother board. Ek waterblocks abd fittngs, thermaltake tubing, black nemesis radiators, corsair ml120 fans, delidded liquid metal i77700k, 1080 ti, corsair vengance lpx 3000mhz 8x2 gb ram. I am ALWAYS looking for ideas to upgrade this build. I have an abundance of leftover acrylic, an unused dremel, and an unsatisfiable need to continue to upgrade this build to make it look amazing. I will be doing a motherboard tray with white acrylic that will sit behind the motherboard and will extend the entire back side of the case, to give it a clean white box look. Again just looking for ideas to mod it even more. Please any ideas are welcome. Thanks so much!
-
Capnspace got a reaction from SmashinMachine in The Water Cooling Gallery
Redid my bends to make everything look more parallel. What do you think? Posted a before and after. Also added another Samsung 850 evo 1tb SSD. Now total storage consists of:
2x 1tb Samsung 850 Evo SSD's in Raid 0 for games/video editing/storage
1x Samsung 950 Evo NVME M.2 for Operating System
1x 2tb Seagate Barracuda 2.5" for scheduled imaging of my Raid 0 config.
I decided to use Macrium Reflect to schedule Sunday night weekly imaging backups of my Raid 0 2x 1tb Samsung 850 evo drives in Raid 0 to my 2tb Seagate Barracuda. This is for redundancy in the case of a drive failure. Any other suggestions of how to config this are greatly appreciated.
Thanks
-
Capnspace got a reaction from amvoith in The Water Cooling Gallery
Finally had time to install all 4 modules and attach the EK water block. I will be re-doing the bends so that everything is parallel, but since I had limited time and wanted to get online to play some pubg with my friends, I set it up the simplist way possible. Please let me know what you think and how I can do the final loop. Otherwise, it came out pretty nice.
Thanks!
-
Capnspace got a reaction from Generation in The Water Cooling Gallery
Finally had time to install all 4 modules and attach the EK water block. I will be re-doing the bends so that everything is parallel, but since I had limited time and wanted to get online to play some pubg with my friends, I set it up the simplist way possible. Please let me know what you think and how I can do the final loop. Otherwise, it came out pretty nice.
Thanks!
-
Capnspace got a reaction from Generation in The Water Cooling Gallery
Project Suite and Tie
Case: air240
Cpu:i77700k delidded with rockit88 kit applied conductonaut ti cpu die
Also, replaced intels ihs with rockit's beautiful copper ihs. Temps stayed dropped hard after installation.
Gpu: 1080 ti founders edition
Ram: 32gb (4x8gb) corsair vengance lpx 3000mhz cl15
Ssd: Samsung evo 960 1tb
M.2: Samsung evo 960 250gb nvme m.2
Mobo: asrock z270m extreme4
Psu:SeaSonic Electronics PRIME Titanium 650W 80 Plus Titanium Modular Power Supply
Fans: 3x corsair ml120 white
Custom Waterloop
Gpu: ek full cover waterblock
Cpu: ek supremacy evo
Radiators: 240mm ultra stealth black nemesis white radiator & 120mm ultra stealth black nemesis white radiator
Reservoir: Alphacool: 150mm eisenbacher reservoir
Pump: ek d5 pump
Tubing: thermaltake petg (the best tubing known to man. So easy to work with)
Fittings: eK white hardline fittings
Fluid: cl1000 opaque white
Peripherals not shown in pictures:
Mouse: corsair m65 pro
Mousepad: corsair mm800 rgb
Keyboard: corsair k70 rgb rapidfire
Headset: corsair void pro
Monitor: acer predator x34P overclocked 120hz (just bought this baby today )
Back of case tubing: ek zmt matte black soft line tubing with ek soft line fittings and horsepower spout
Custom cable sleeving from mainframe customs
*custom wires ti exact length with custom sleeving.
Also added a custom side panel made of clear acrylic with 1/2" standoffs (painted copper). Lastly, added custom acrylic floor paneling and custom acrylic top paneling with square cutouts to allow air to pass through.
-
Capnspace got a reaction from SmashinMachine in The Water Cooling Gallery
Finally had time to install all 4 modules and attach the EK water block. I will be re-doing the bends so that everything is parallel, but since I had limited time and wanted to get online to play some pubg with my friends, I set it up the simplist way possible. Please let me know what you think and how I can do the final loop. Otherwise, it came out pretty nice.
Thanks!
-
Capnspace got a reaction from Zando_ in The Water Cooling Gallery
Finally had time to install all 4 modules and attach the EK water block. I will be re-doing the bends so that everything is parallel, but since I had limited time and wanted to get online to play some pubg with my friends, I set it up the simplist way possible. Please let me know what you think and how I can do the final loop. Otherwise, it came out pretty nice.
Thanks!
-
Capnspace got a reaction from Mnpctech in The Water Cooling Gallery
@Mnpctech Thank you! I actually got cable combs from you guys and was going to buy a verticle gpu mount and riser for my future sli which will run to the other side of the case (custom window and watercooled gpu mounted vertically) First build but I've let this hobbie consume the past 6 months of my life and now am a pro at modding and have all the tools necessary. Want to do it as a side gig as I seem to be good at it and more importantly like doing it.
And If anyone needs help with their build or modding let me know as I'd be happy to do some pro bono work. Also, this build is a monster overclocker
Below is the finished custom modded corsair emblem I made out of acrylic and an led.
-
Capnspace got a reaction from Mattias Edeslatt in The Water Cooling Gallery
@Mnpctech Thank you! I actually got cable combs from you guys and was going to buy a verticle gpu mount and riser for my future sli which will run to the other side of the case (custom window and watercooled gpu mounted vertically) First build but I've let this hobbie consume the past 6 months of my life and now am a pro at modding and have all the tools necessary. Want to do it as a side gig as I seem to be good at it and more importantly like doing it.
And If anyone needs help with their build or modding let me know as I'd be happy to do some pro bono work. Also, this build is a monster overclocker
Below is the finished custom modded corsair emblem I made out of acrylic and an led.
-
Capnspace got a reaction from mikeeginger in Corsair air 240
Hey all,
I finished my build. I went with the corsair air240. I live in an apartment with my girlfriend and she has her own crafting area, which didnt leave me much room for a computer so I decided to go with a small form factor case and mother board. Ek waterblocks abd fittngs, thermaltake tubing, black nemesis radiators, corsair ml120 fans, delidded liquid metal i77700k, 1080 ti, corsair vengance lpx 3000mhz 8x2 gb ram. I am ALWAYS looking for ideas to upgrade this build. I have an abundance of leftover acrylic, an unused dremel, and an unsatisfiable need to continue to upgrade this build to make it look amazing. I will be doing a motherboard tray with white acrylic that will sit behind the motherboard and will extend the entire back side of the case, to give it a clean white box look. Again just looking for ideas to mod it even more. Please any ideas are welcome. Thanks so much!
-
Capnspace got a reaction from CaSsE in The Water Cooling Gallery
Project Suite and Tie
Case: air240
Cpu:i77700k delidded with rockit88 kit applied conductonaut ti cpu die
Also, replaced intels ihs with rockit's beautiful copper ihs. Temps stayed dropped hard after installation.
Gpu: 1080 ti founders edition
Ram: 32gb (4x8gb) corsair vengance lpx 3000mhz cl15
Ssd: Samsung evo 960 1tb
M.2: Samsung evo 960 250gb nvme m.2
Mobo: asrock z270m extreme4
Psu:SeaSonic Electronics PRIME Titanium 650W 80 Plus Titanium Modular Power Supply
Fans: 3x corsair ml120 white
Custom Waterloop
Gpu: ek full cover waterblock
Cpu: ek supremacy evo
Radiators: 240mm ultra stealth black nemesis white radiator & 120mm ultra stealth black nemesis white radiator
Reservoir: Alphacool: 150mm eisenbacher reservoir
Pump: ek d5 pump
Tubing: thermaltake petg (the best tubing known to man. So easy to work with)
Fittings: eK white hardline fittings
Fluid: cl1000 opaque white
Peripherals not shown in pictures:
Mouse: corsair m65 pro
Mousepad: corsair mm800 rgb
Keyboard: corsair k70 rgb rapidfire
Headset: corsair void pro
Monitor: acer predator x34P overclocked 120hz (just bought this baby today )
Back of case tubing: ek zmt matte black soft line tubing with ek soft line fittings and horsepower spout
Custom cable sleeving from mainframe customs
*custom wires ti exact length with custom sleeving.
Also added a custom side panel made of clear acrylic with 1/2" standoffs (painted copper). Lastly, added custom acrylic floor paneling and custom acrylic top paneling with square cutouts to allow air to pass through.
-
Capnspace got a reaction from Tech_Dreamer in Corsair air 240
Hey all,
I finished my build. I went with the corsair air240. I live in an apartment with my girlfriend and she has her own crafting area, which didnt leave me much room for a computer so I decided to go with a small form factor case and mother board. Ek waterblocks abd fittngs, thermaltake tubing, black nemesis radiators, corsair ml120 fans, delidded liquid metal i77700k, 1080 ti, corsair vengance lpx 3000mhz 8x2 gb ram. I am ALWAYS looking for ideas to upgrade this build. I have an abundance of leftover acrylic, an unused dremel, and an unsatisfiable need to continue to upgrade this build to make it look amazing. I will be doing a motherboard tray with white acrylic that will sit behind the motherboard and will extend the entire back side of the case, to give it a clean white box look. Again just looking for ideas to mod it even more. Please any ideas are welcome. Thanks so much!
-
Capnspace got a reaction from Tech_Dreamer in Project suit and tie
Since I documented the process here are some pics of the delidding. This is a pretty simple installation if you have the right tools. I may even put some lm on my gpu as well, but have heard horror stories so I am hesitant.