Jump to content

JR88

Member
  • Posts

    138
  • Joined

  • Last visited

Everything posted by JR88

  1. JR88

    Good Hype Music?

    You Need some Metal in you're Life Lol
  2. They Do make good tough Vehicles. I've seen wayy more Ford's and Chrysler's with problems. Plus they have the only Truck that looks the Best..Don't like the look of the Ford's or Dodge's... I want one of the New ones man.
  3. That's the well Kept Secret Low Concentration of Glycol is good the inhibitors in it are strong and anti-corrosion fighting. It is gummy and thick though and a high concentration is bad and would rob cooling performance, still doubt it would clog anything though. I've ran a mixed metal loop for years and it didn't get that bad at all nothing got ate or rotted out. And Copper Blocks can be Cleaned with Alcohol and or Vinegar.
  4. I thought it was of the Notion just use what you can get desk wise. My desk is old and the kinda cooler ones with larger drawers etc, Put a bunch of junk in etc...someone tried painting it but it peeled looked like, it needs stained and repainted or something. And I agree the 8700k is the battle station to have now, should get it with one of the EVGA boards or the Maximus etc. and hopefully will have no problems with it...I still think you'll want to delid it though after playing with it for awhile and seeing how hot it runs.
  5. Unless you really want to die stuff...still probably good and preventative and old school to run 5-10% Glycol. always what I've done.
  6. No it's the Shit with this generic China board the Bus is stuck at 133mhz it don't go up even if you set it higher...it's fail... I need another board it is a good chip.
  7. Well It's hard Tellin what them Krauts Dope Heads are doing over there again Lol, Don't drive that shit here lol...I shouldn't drive the shit I'm driving it's gonna breakkkk, Need Chevy Dude, Ford and Chrysler gonna break too Lol
  8. Hell I don't know just threw something together. Yeah I know it's no D5 or DDC or anything. and yeah I about did Pick up an XSPC that I Think was 45-50mm Thick.
  9. Well I already had some old ddr3 1600mhz g.skill....too bad it has to loaf along at 1066mhz. and same stuck at 2.9ghz on the x5650. sucks man..I know now the chip is still good..somebody needs to point me in a direction of a mobo that can clock this chip.
  10. Oh Id like to as well. Jump right in and tell ya a lot of what I been doing and think I know and Picked up.
  11. Yesss Sir, that would be running as we speak. I got a shitty Board for it though...other than that the x5650 seems still strong. I used ESO a lot for Game Testing/Benching and a baseline, despite it's kind of a shitty game somewhat. It ran that pretty well some minor frame drops, if I could overclock that would be a non-issue. Need to see if it will run Battlefield. Worth the bootsale bargain 50$ though definitely. and 100$ board...
  12. I don't know I just got some cheap shit and all those ones are always like 28-34mm slim ones. They don't seem that restrictive though, I mean a 420L/H pump works it fairly well not that great mind you but ok..I see more restriction coming out of the Block of course, that looks highly more restrictive. But around next week will have slight pump upgrade one coming is suppose to be 500L/H.
  13. yeah a cheap rig/backup/ Clocked higher than me still...this generic china oem 6 phase board don't overclock on anything even the ram... but it runs the x5650 though...stuck at like 2.9ghz and 1333 on the 8gb of ram...sucks man...would be monster if it could overclock. cpu is frozen though on water thing barely hits 50c at that at all...thing should run forever.
  14. The 4K gpu is the 1080 of course.
  15. no I'm talking about the rads...all the ones I got are like 30-34mm
  16. They don't want you being a Pervert...obscene and Savage Lol
  17. You just need a fan on them. It's not the mosfets it's the chips running hot and needs delidded, you could probably pick up 3-5 degrees delid relid with any decent tim. I'm suspecting about what that kind of results would be.
  18. I voted the Asrock...you Fail the Asus ain't any better Lol. Telling ya Asrock is Awesome.
  19. I got a cx650m and the sata side is deaddd on it...came like that...so I don't know the quality of them anymore. It don't surprise me it makes noise lol
  20. Most of the Forums are yeah good at that banning People.
  21. That's a little better than my best.. have two battle stations the gigabyte z270x and the evga ftw k..should be getting the Gigabyte back around next Tuesday and well the ftw k might be a little longer. Should save the ftw k immaculate board it is. and just run the Gigabyte. And hopefully cpu isn't dead and appears the delid/relid went well. Will find out soon enough. Here soon should have a slightly better Pump coming in too, slightly higher flow rate. using a Z97 copper block right now and aluminum rad and about 5% Glycol. Been working well.
  22. A lot of people Probably Still have the trusty Noctua D14 and that thing can be mounted on just about anything. I would use that for Airrrr.
  23. I want People to send me their Ivy and up CPU's for delid/relid service, and fix Intel's goof of not very good Tim Lol
  24. Still want to offer you a Delliding Service them suckers run Hott too. probably next week or two will report back my findings on the relided 7700k if I didn't kill it...Probably at least run 3-5 degrees cooler, they put a lot of that crappy toothpaste tim on..probably being more of an insulator than doing well at cooling. Telling ya at least try it one time. More impressed how clean a job it turned out...telling ya go to Lowe's or Home Depot and get that good Clear Silicone that Shit Sticksss and holds the Lid real well. People said they had Problems getting the Lid back on well, telling ya you need this good stuff. If It not much a difference I'll try dabbing some Liquid Metal on there, don't really want to though because it's conductive.
  25. Yeah...just damn...lol...go easy on them clutch's apparently not the most durable design. Must of done a good job though, feels reallll tight now.
×