CliffordZ580

So I forgot to connect the heatsink back into the motherboard. Thanks for help Spooky.

Sorry my bad, I have one of the cheap 120mm fans exhausting air out. Also right above the CPU is Cooler Master Air Flow 140mm and a cheap 120mm fan next to it exhausting air. I'm going for a push-pull config. I was able to make sure the thermal paste was applied properly but haven't had much time to play around with. It's possible I messed up the orientation of the new 140mm fans or didn't fully tighten the cooler down. I thought I'd ask cuz I certainly don't know everything

I'm new to pc building but have watched the channel for years. I replaced the original Ryzen 2200G heatsink thermal paste with Kryonaut Thermal Grizzly paste, added 3 Cooler Master Masterfan Pro (Air Pressure) 140's to pull air in, and added a Cooler Master Masterfan Pro (Air Flow) 140. More air flow right!? Before changing the thermal paste and adding more/new fans I had 2 cheap fans pulling air in and a the same cheap fan pulling air out and my idle temp was in the low to mid 30 degrees C but now it gets to up to mid 40's if not 50's. I ran Superposition Benchmark cuz I had to know if that would be to much for this now hotter CPU but it maxed at 68 degree C. As I write this I have AMD Rzyen Master, Radeon Setting, and Chrome open I've hit low 50's. Is this normal or did I mess something up? Even tho I've watched the channel a bunch I'm still a noob. Thank you for any help!