Messiah2323

An option would be to add one at the top, but on the outside instead, if you pull out the cover from the top, you'll see there is a possibility of going external on the top side, if the tube length allow that at least. Have the same case, with a Phoenix 360 core also in wait to be installed. Love this case from der8auer.

Update, when putting the power setting to "Power Saver" the noise is completely gone, with the CPU running at 800mhz...

managed to reduce it quite a bit, by re-seating the motherboard, and putting the 9th stand-off in the motherboard, also tried to re-plug some connections. However now it only happens with mouse movement only and clicking, scrolling. Also, when opening EVGA Flow Control and X1 it make's strange noise upon opening, what could this be here? PSU, Motherboard? Edit : when putting the power plan to "High performance" the noise coming out of my headset is pretty loud, when changing to "Balanced" almost none can be heard.... strange...

That's what i thought too, i've tried most of the things, everything from devices disconnected, GPU out, clean cable management so nothing is touching anything. Even asrock is running out of idea's, they most likely will tell me to RMA the board, which i will gladly deny. Will try putting the stand-off in to see if it does anything.

so since my new build is complete, i only have one issue with it, and it's that the motherboard audio jackets make buzz/hum sound on my headsets. it's only noticeable when my headset notch is above 40%, still, i'd like to max it out nevertheless, luckily i still have the front jackets that work flawless, but still annoying that there is interference on back motherboard jacks. My case also shipped with pre-installed stand offs, however one was still missing in the yellow area, would this really make a grounding issue here? I also searched google, ending up on the asrock forum.... with someone explaining : "I think I solved the problem. Fractal case came only with 8 motherboard standoffs, however motherboard has places for 9. So I swapped top mid standoff to slot near audio section and video card (standoff place for mATX board). Now I do not have interference, at least with my quick testing. So problem was some kind of grounding issue. I don't understand why fractal does not give any additional standoffs... I hope this helps if others have same kind of problems" Build : 9900k Taichi z390 Seasonic Focus GOLD 850w 2080ti EVGA CL240 16GB DDR4 Corsair@2800mhz Lian Li 011 Powered by 14 Noctua fans.

Damn! i just got the Logitech G400S and its amazing! the only thing that has been bothering me is the shape of it. i think i'll have to get used to it.. since im used to these shapes : the tracking is great,very great! the only problem i have atm is when i go down with the mouse ( verticaly ) i lose my Accuracy a little bit.. im not sure why that is its probably the shape is medium sized or i have to get used to the shape of it.. other than that its a very good mouse if you ask me..

ordered a g400s.. see what it givees thanks everyone!!

i use palm+claw grip. squeezing the mouse a little bit. my fingers are tiny. i had the Abyssus,G9 which broke both. tho the mouse could be a little bit bigger then the G300,or abyssus. BUT the shape i most liked was the Razer Abyssus. small, flat. but i wanted to try something else , a little bit bigger then the G300 which would be the g400s? but the thing is people have said it has tracking issues? ive checked the corsairs mouse,roccat kone,cm storm, but they arent my taste to be honest.. little bit dissapointed that the Rival is so big.. damned! my g300 sensor isnt that great either

damn.. my hands are prolly little smallers then yours.. i really wanna give them both a shot.. tho if i didnt like the shape of the sensei and DA i probably wont like the rivals? correct? the first time i saw this mouse i thought it was a mouse for giants... but i heard very very good reviews about it and about the sensor pretty nice... its funny how my abyssus died and after that every other mouse actually felt "weird' lets say. i dont want to go back to the Abyssus because some of the new batch have jitter apperently. if i just can fingertip and squeeze the RIVAL or G400S im fine with that.. tho they both seem for palm grip.. i just dont want to go back to "razer"

GX9

ill think about it, i really dont wanna retrade again from the local store.. lol. i had the sensei and the laser was terrible. so i retraded it for deathadder and didnt like it too so i sold it. What grip did you use on the steelseries rival? thanks. im guessing between those too, but as you guys said it prolly to big for me...

it said it so it had the 4G sensor. the shape wasnt my thing, and the performance wasnt good if you ask me. so i retraded it at my local store. Alright, so the Rival is a meh then? on the g400s some people mentioned it had some problems on overclock.net forums, is this true? i also was looking at the zowie mouses but they have wrong CPI steps if you ask me. i want to game at 1600-1800 dpi. ( i play dota ) somemtimes CSGO but other than that only dota 2. thanks

thanks for the reply. i re-sold my deathadder 2013 4G because it had some sort of delay on it. is the g400s any good? i heard it had some problems with it sensor? i was looking out for the rival but yeah if it doesnt fit my hands..

thanks for the reply. yea , thats what im afraid of... i actually liked the smallers mouses alot better... so i can squueze them and claw grip them when im on fire in DotA 2. hopefully the rival wont dissapoint and wont feel lika something heavy in my hand. i had the sensei and i returned it because of the laser probably i didnt like.. and weird shape.

Hello, ive heard some good things about the steelseries rival.. but it looked like a large mouse to be honest.. i have very small hands... ( 17.5CM ) from palm to fingertip. i heard i will run into problems because the mouse is to big? or will i be fine? i was always used to small mouses like the Abyssus or G300 thanks.