AlexTzone

Turns out MJOLNIR's PSU-bracket can be flipped upside down to provide even more clearance for the AIO (from 57 to 59mm). Funny how it has more functionality than the creators are aware of lol x) It was discovered thanks to a comment from one of the guys over at the SFF forum.

Power button on the back eh? Maybe also sell a wireless button you can use to turn it on/off with? They're like a car remote but for the computer and go onto the mainboard USB header.
https://www.amazon.com/SilverStone-Technology-Wireless-Interface-ES02-USB/dp/B01MQUANS8
There's other cheaper ones from Asia available I'm sure, it's pretty slick and a nice work around for the hard to reach power button. If you could get a quantity order setup you could just pass along the discount to backers and maybe attract some more people.

Heey guys! The first video is up (AIO/Liquid cooling guide), let me know what you think! ?
https://youtu.be/cym0OLx26co

Would you look at those, finally managed to snap a couple of nice pics! ? Also, the first review unit is now in the hands of an epic tech reviewer!
 

 

 

 
Gonna launch this mighty beast on November 26 at 4pm CET! What do you guys think? Btw that upside down corsair logo can be fixed by flipping the core

Best,
Alex

Would you look at those, finally managed to snap a couple of nice pics! ? Also, the first review unit is now in the hands of an epic tech reviewer!
 

 

 

 
Gonna launch this mighty beast on November 26 at 4pm CET! What do you guys think? Btw that upside down corsair logo can be fixed by flipping the core

Best,
Alex

Wazzup guys!

The cases are now fully assembled, just have to wait for black screws and packaging before we packe'em up and send off to YouTube! Check out some pics below, keep in mind that MUCH BETTER pics will come out once Mods By Ben Q takes a look at the cases.

The three musketeers
 
Let me know what you think 

Best,
Alex

Wazzup guys!

The cases are now fully assembled, just have to wait for black screws and packaging before we packe'em up and send off to YouTube! Check out some pics below, keep in mind that MUCH BETTER pics will come out once Mods By Ben Q takes a look at the cases.

The three musketeers
 
Let me know what you think 

Best,
Alex

Heey guys, time for an update!
Just got the word that the anodizing is finally finished, here are a couple of pics. FedEx estimates that they will be here on monday. Can't wait to put it all together and snap some awesome pics for you. Then it's time to continue the path of MJOLNIR ?
 


 
Best,
Alex

Heey guys, update!

The prototypes are more or less complete, just need to send them off to our local anodizer for some final touch-ups. This is also the reason I don't want to show you the prototypes in broad daylight yet, you deserve to see perfection...nothing less  Buut I can show you some RGB action:
 



 
The lighting setup uses 5V and is controlled over bluetooth. The LED strips have a density of 144 LEDs/meter and are mounted with 3M tape. You can also choose between 200 lightning-effects in addition to solid colors. I'm very happy with the results as you never directly observe the LED strips, only your epic hardware basking in their light 

On a whole other matter, I've had some problems squeezing in the Kraken M22 & 25mm fan (NF-A12x25 PWM from Noctua), which I think can be contributed to:
Kraken M22s large-diameter tubes are hard to bend. Kraken M22 seems to be 154mm long as opposed to the 152mm stated on their website. Can anyone please measure their and report back to me? I'm terrible at cable management. I did manage to comfortably install the Kraken M22 & 15mm fan (NF-A12x15 from Noctua) though. The Corsair H60 & 25mm fan should be much easier to work with, will order one next week.

Best,
Alex

Heey guys, time for an update! ?

Sorry for the lack of updates in the past 2 months, I blame at least 50% on poor / slow PostNord shipping. Anyways, the samples have now been examined and we're very happy with the anodizing quality. However, because we're using different alloys it will be hard to create that "space gray" / DARK anodizing for the prototypes, especially if we want the parts to match with each other. The anno-shop told us that they would do their best, but if there are color match problems the parts will be anodized in black.

Natural light

 
Fluorescent light


 
The shells are packed and ready for final anodizing!


 
I'll send the package today (Monday 5th of August). After that its 10 days shipping + 2 weeks anodizing (max) + 1 weeks of shipping back to us. Stay tuned for more and let me know if you have anything on your mind ?

Best,
Alex

Heey guys, time for an update! ?

Sorry for the lack of updates in the past 2 months, I blame at least 50% on poor / slow PostNord shipping. Anyways, the samples have now been examined and we're very happy with the anodizing quality. However, because we're using different alloys it will be hard to create that "space gray" / DARK anodizing for the prototypes, especially if we want the parts to match with each other. The anno-shop told us that they would do their best, but if there are color match problems the parts will be anodized in black.

Natural light

 
Fluorescent light


 
The shells are packed and ready for final anodizing!


 
I'll send the package today (Monday 5th of August). After that its 10 days shipping + 2 weeks anodizing (max) + 1 weeks of shipping back to us. Stay tuned for more and let me know if you have anything on your mind ?

Best,
Alex

Hey guys, I think you'll like this one! ?

After a whole month of testing, we’re finally ready to present MJOLNIR thermal results – CHECK THEM OUT HERE.

It’s good to point out that we have tried all possible fan configs (push vs pull), in some cases improving thermals by up to 9°C. Head over to page 14 (in the link above) to check out some recommendations – we tried it all so you don’t have to. I'll post a brief summary of the results below.
 

Hardware
CPU: INTEL CORE i7 8700
GPU: ASUS RTX2070 TURBO
PSU: CORSAIR SF600
37 mm COOLER: NOCTUA NH-L9i
48 mm COOLER: NOCTUA NH-L9i & NF-A9 PWM
120 mm AIO: CORSAIR H55 & NOCTUA NF-A12x25 PWM
FRONT FAN: NOCTUA NF-A12x25 PWM
BACK FAN: NOCTUA NF-A12x15 PWM
 

CPU Testing Methods
All tests reached equilibrium long before 30 minutes, but we kept them running for the sake of consistency. First, we test CPU thermals in the standard orientation, for both metal- and glass panels. Next, we check if something improves in the reversed orientation. Last, we test how thermals are affected by swapping around the top panel and dust filter.

CPU Thermals - Standard Orientation
It’s pretty evident from the results below that the 120mm AIO is vastly superior to any of the air-cooling options we tested. The difference really can’t be overstated. Setting the radiator fan to pull instead of push performed between 3°C to 9°C better. Using a 120mm fan below the motherboard (back fan) improved VRM thermals by 22°C. If you plan to go for a high-TDP CPU like the 8:th / 9:th gen Core i7 or Ryzen equivalent – definitely go for the water-cooling option.
 

 
 
CPU Thermals - Reversed Orientation
Reversing the orientation yields an additional improvement of between 1°C to 6°C. Keep in mind that when using the 48mm cooler, the case fan should be configured in PULL for the metal panels and PUSH for the glass panels. Next, we check if thermals are improved further by swapping around the top panel and dust filter.
 

 
 
CPU Thermals - Reversed Orientation & Dust filter top
Having the dust filter on top of the case, in reversed orientation, improves thermals further by about 1°C to 3°C, not much but still significant for those looking to overclock their high-TDP CPUs. If you’re the type of person that likes to push their system to the limit, definitely check out our setup recommendations on page 14 (in the link above).
 

 
 
GPU Testing Methods
All tests reached equilibrium long before 30 minutes, but we kept them running for the sake of consistency. Keep in mind that we’re using a blower-style GPU, a cooling solution optimized for thigh spaces. Thermals for open-air GPUs may vary, something to keep in mind.

GPU Thermals
 

 
 
Cable Management
 

 
As you can see it gets pretty crammed in there, especially when maxing out (i.e AIO + 25mm thick fan + 120 mm fan below the motherboard + full-lenght GPU). I think it may be well worth the effort to create custom cables.

Really hyped to hear what you guys think!!

Best,
Alex

Good to see you made it over here too @AlexTzone 
 
For anyone interested, here were my thoughts about the case in some length
 
 

Looks  nice even in bare aluminum. I don't think GN would review such a low volume niche product but it never hurts to try.

Yes, found it. The clearance is a bit tricky. The Eisbär measures 67.5mm in height plus angled fittings. This won't work then. There's an LT version of it measuring 39mm with the ports on the side. That's probably the best option. I know of no other block/pump combos. Unfortunately the 240mm radiator will only fit one fan. The specs unfortunately miss out on the total clearance. The single 120mm radiator is defined with a max thickness of 56mm - or is that the entire clearance including a fan? Would be great to see have a more detailed clearance overview. Maybe with some trickery it would be possible to fit a 240mm radiator with 1x120mm and 1x80mm fan with a bracket. 
 
The PSU needs to be turned if the glass panel is on the CPU side. The GPU specs aren't really clear either - is the max width of 51mm the space between the back of the GPU and the side panel or is there any other restriction? Because like 3 or 4mm of space between the fans and a glass plate is definitely not enough for proper cooling. You will need to either put the perforated panel on that side or flip the gpu like Phanteks did on the Shift series. There's more space and if the vented panel is on that side you at least get some fresh air to cool the PSU.

As someone who got his first micro form factor recently...and years prior had EATX cases because...More is better right?  This is pretty sexy.
 
You need a premium edition...I just read the new posts but I remember someone talking about a hammer handle.  The Norseman in me, if he were to buy this case, would get the one available with a handle.
 
Well you don't NEED, but if you did an optional, albeit likely expensive because low production option for a handle I think some would bite.

At this point the LMG staff are more into doing wacky things with tech rather than in depth reviews of cases (unless they're doing buyers guide/showcases) becasue as Linus himself once stated "Cases are boring now" so there not worth doing stand alone videos about
Jay at least is going to try and shove a water block in there or something, and Dmitri is just a good all around feedback guy who has a very good sense of detail for cases as a whole, not just "Does it have airflow or not". Sadly I'm not familiar with OptimumTech. BitWit and Pauls hardware might be good too (Paul does monthly build videos as well as reviews)

Had a look at your website. How close is a 2 slot GPU to the outer glass panel? Is it possible to flip the psu with the fan facing the GPU side? How big the the clearance on the bottom for fan and radiator combinations? I assume slim radiators and fans are needed? Probably also a block/pump combo like the Alphacool Eisbär? How much cpu cooler clearance does the case offer?

Who you sending review units to? Two off the top of my head that might be interested would be HardwareCanucks and Jayztwocents. Dmitri (HWC) especially will give you some good B-roll of the case.

This looks really great. Are there any technical specs officially out there and more pics from all sides? I love SFF builds and this one does seem to be well vented on top.

In the spirit of Odin, UPDATE!

We have been narrowing down our search for the perfect anodizing shop, I'll do my best to send them the prototypes in the upcoming week. Once that's done there is nothing standing in between MJOLNIR and some long-awaited YouTube reviews  For now, here are some more pics of the assembled enclosure (not yet anodized), metal and glass panels as well as the dust filter. I think the manufacturers have done a terrific job!
 
Featuring our goat-mascot...Ralph!
 





What do you guys think?

Btw please spread the word about MJOLNIR if you can, however you can. The relaunch is mainly dependent of how many we have in our email list  I'm quite sure we'll reach the appropriate level in 3-4 months, but it never hurts to accelerate the process a bit more. Dream scenario: enough people have subscribed after the first couple of Youtube reviews and we can launch straight away 

Best,
Alex

Heey guys, update!

The prototypes are more or less complete, just need to send them off to our local anodizer for some final touch-ups. This is also the reason I don't want to show you the prototypes in broad daylight yet, you deserve to see perfection...nothing less  Buut I can show you some RGB action:
 



 
The lighting setup uses 5V and is controlled over bluetooth. The LED strips have a density of 144 LEDs/meter and are mounted with 3M tape. You can also choose between 200 lightning-effects in addition to solid colors. I'm very happy with the results as you never directly observe the LED strips, only your epic hardware basking in their light 

On a whole other matter, I've had some problems squeezing in the Kraken M22 & 25mm fan (NF-A12x25 PWM from Noctua), which I think can be contributed to:
Kraken M22s large-diameter tubes are hard to bend. Kraken M22 seems to be 154mm long as opposed to the 152mm stated on their website. Can anyone please measure their and report back to me? I'm terrible at cable management. I did manage to comfortably install the Kraken M22 & 15mm fan (NF-A12x15 from Noctua) though. The Corsair H60 & 25mm fan should be much easier to work with, will order one next week.

Best,
Alex

Dark Matter.

Heey guys, a short update / progress on the case!

Here is 60% of the internal frame and a tempered glass panel:
 

 
Just for reference, it's supposed to look like this by the end. Note that pic below is slightly outdated in that the MOBO cutout is smaller, we have made it larger to improve back-mounted M.2 thermals.


 
FEDEX notified me yesterday that the RGB setups / Enclosures have arrived in Gothenburg, I'll go back there on Monday and snap pics for you till Tuesday. The back panel is also expected by Monday. All remaining parts will be here in the next 2 weeks (there was a slight problem where one of the parts got anodized in the wrong color and the manufacturer had to remake it).
 
See you guys on Tuesday
 
Best,
Alex

Very cool, excited to see updates!