Jump to content

MuricanDoggo

Member
 View Profile  See their activity

  • Posts

    19

  • Joined

  • Last visited

 Content Type 

Everything posted by MuricanDoggo

  1. MuricanDoggo
    Most of my rgb parts are from corsair, and I wanted to know if my motherboard was compatible with iCue so I could sync it all up, or at least have my corsair parts compatible with aura sync, you can find the build here. Thanks!
  2. MuricanDoggo
    is there a difference between barracuda and barracuda pro? I'm assuming pro would be better
  3. MuricanDoggo
    the Z370-E board was said to be discontinued, that's why I upgraded to the Z390-E.
  4. MuricanDoggo
    I'm looking at the wd and seagate ones and they all seem $50+
  5. MuricanDoggo
    Any recommendations for a specific drive?
  6. MuricanDoggo
    I'm about to mass buy all of the parts on the list and wanted to know if there is anything that I might need to know when buying this or just some overall tips in the case, since I'm still quite new to the pc building scene. Anything helps!
  7. MuricanDoggo
    Thanks!
  8. MuricanDoggo
    ok. Thank you so much for all the help today
  9. MuricanDoggo
    At this point, I'm just gonna add a total of 4 ML140 fans and get some fan splitters to make it easy. There are different pin numbers for the splitters, so which should I buy, do you have any recommendations for them?
  10. MuricanDoggo
    Even if I wanted them all to match? Would it just be covered up by things?
  11. MuricanDoggo
    Ok good to know. So how many fan splitters would I need? Also do you know how I could check what fan "model" (I guess you would call it) comes with my case/cooler so I can try to match them
  12. MuricanDoggo
    I have full ram not low profile, would that be another thing to interfere with it? Also 370mm is the max gpu length, the dimensions are 16.74 x 8.46 x 18.26 inches, translate that to millimeters and you got 425.2 x 214.88 x 463.8 mm. I'm not sure which would be the one to look at to see if it would fit, but just by a glance it looks like it should fit.
  13. MuricanDoggo
    my understanding was that the 280 rad wouldn't fit on top
  14. MuricanDoggo
    ok so that would be a total of 5 fan slots if I'm understanding correctly. 2 on the cooler and 3 just in the case? Also do you think the 80mm thickness after the extra fans would be an issue?
  15. MuricanDoggo
    I can just send over my entire current parts list since I have another question to ask also, yes I did mean on the rad. https://pcpartpicker.com/user/MuricanDoggo/saved/p33jyc The other question was that it says that the m.2 will disable one of my sata connectors, but would that be true with a nvme pcie?
  16. MuricanDoggo
    i have the rog strix 2080 8gb oc, so I'm not sure how that would play out EDIT: Just checked and my card is about 300mm out of the max 370mm
  17. MuricanDoggo
    How would the radiator be supported? This is all confusing to me. This is my first time doing any form of water cooling, hence why I chose an all in one cooler. Also by push pull you are implying push through the radiator and pull out the radiator I assume
  18. MuricanDoggo
    yes sir
  19. MuricanDoggo
    I'm looking to build a new pc in the 400c and wanted to know how many fans I was needing to get. I am buying the h115i pro 280mm and want maximum cooling potential for my i7-8700k that I want to overclock. Would I be able to fit two fans on each side? Would I need to buy special screws? Please help! I may need to ask follow up questions to really understand this since I'm still quite new to the pc building scene
  20. MuricanDoggo
    MuricanDoggo

    I changed my name Pog

  21. MuricanDoggo
    MuricanDoggo

    I want to change my name

×