Jump to content

Aklenar

Member
  • Posts

    22
  • Joined

  • Last visited

Awards

This user doesn't have any awards

Aklenar's Achievements

  1. The cpu was not hot at all when I tried starting it up
  2. I am using a z370 F Asus Board, i7 8700k, and HD120 rgb fans. And I do have fans on the radiator. The damn thing still isn't booting up. Here is a picture of the setup. Can anyone tell me what I am doing wrong? It is annoying me a lot. Thanks
  3. I am new to the liquid cooling, and I found out my motherboard requires a cpu fan to be plugged in to boot up. However, since there is a waterblock on the cpu, there is no need for the cpu fan, so what should I do?
  4. So do you guys suggest me to just get a cheap cooler to test if the cpu/motherboard work?
  5. Oh, I did not know that cpus get that hot even with nothing running on it.
  6. Which fan? I had no cooler on it.
  7. I don't even think it turned on because there was nothing displayed on the screen. Even if no cooler were to damage the cpu, I think I should of at least seen it turn on for a bit.
  8. I forgot to mention that I am doing a liquid cooled build. So it would be extremely difficult to test the board (with a cooler) without fully building the system and running the water loop. So I did not have a cooler. I waited about 5 solid minutes. I have the other cpu and motherboard I tested with.
  9. I just want to make sure all the parts are working. I would of turned it off as soon as I saw it running correctly. Nothing is displaying on the screen
  10. I cannot get my new computer to boot. I even replaced the motherboard/cpu in case those were faulty. Help would be much appreciated. Asus z370-F i7 8700k G.Skill RGB ram 3200 960 Pro SSD 512 GB Evga 1000 G3 power supply
  11. I understand now, thanks for your help
  12. But you said the ones in the video were probably using splitters and they were able to control them seperately
  13. Sorry for asking so many questions (I just want to make sure I dont buy wrong parts), but I can just buy some splitters and it'll all work seperately right?
  14. Almost all my fans/ram are the same as the ones shown in the video. What do I need to do to get the same effect as them?
  15. How did the people on this video control them separately?
×