Jump to content

ManEatingFridge

Member
  • Posts

    210
  • Joined

  • Last visited

Reputation Activity

  1. Like
    ManEatingFridge got a reaction from Robchil in RTX 4090 Constant BSOD DPC_WATCHDOG_VIOLATION   
    Funny enough that I got the GPU refunded and after putting in a new one it fixed all of my issues.
  2. Informative
    ManEatingFridge reacted to Bjoolz in RTX 4090 Constant BSOD DPC_WATCHDOG_VIOLATION   
    All the dump files point to the Nvidia driver. With this crash it can be hard for the OS to know which driver is at fault so I looked through the other pending DPCs listed in the dump file, but I didn't find any good suspects. The PPM (Processor Power Management) did show up often, but that's quite common. You could try updating the Chipset driver, but I don't have high hopes.
     
    There is a new BIOS out that you could try flashing to. You can also try using DDU to clean out the old driver before installing a fresh one if you haven't tried this already. 
  3. Like
    ManEatingFridge got a reaction from BiG StroOnZ in "Predator" Dual AIO 3900X Build   
    The almost two month wait for my 3900X has ended and I've finally completed it!
     
    CPU: AMD Ryzen 9 3900X
    CPU Cooler: NZXT Kraken X62
    Thermal Compound: Thermal Grizzly Kryonaut
    Motherboard: Asus PRIME X570-PRO
    Memory: Corsair Vengeance LPX 32 GB (2 x 16 GB) DDR4-3200 CL16
    Storage: Samsung 970 Evo Plus 1 TB
    GPU: Asus GeForce GTX 1080 Ti 11 GB Turbo
    GPU Cooler: Kraken G12 + NZXT Kraken X52
    Case: Fractal Design Meshify C
    Power Supply: SeaSonic PRIME Ultra Titanium 850 W 80+ Titanium + Phanteks White Extentions
    Operating System: Microsoft Windows 10 Pro OEM 64-bit
    Case Fan: 3 x Noctua NF-F12 PWM chromax.black.swap + 2 x Noctua NF-A14 PWM chromax.black.swap + 1 x Noctua b9 
     
    The top rad ended up being a ridiculously tight fit with the rad touching the IO shield, front rad and rear fan. There was barely 1mm of wiggle room in any direction or at least thats how it seemed. The cable management was also a nightmare because of all the AIO cables and the 500mm extentions and radiators clogging up the case. I also ran the firmware update for both AIOs in CAM and it was interrupted by some other program shutting the PC down. For a moment it seemed that both were bricked but I managed to recover them with the reprogramming tool.
     
    All in all very long wait and very stressful build but the results are awesome and I'm quite proud. This PC is going to be my gamedev, design, and gaming workstation. 
     
    CPU settings are stock and haven't touched RAM either... yet:
    https://www.userbenchmark.com/UserRun/19525415
    Cinebench R20 - 7048
     
    Pics:



  4. Like
    ManEatingFridge got a reaction from Exotath in "Predator" Dual AIO 3900X Build   
    The almost two month wait for my 3900X has ended and I've finally completed it!
     
    CPU: AMD Ryzen 9 3900X
    CPU Cooler: NZXT Kraken X62
    Thermal Compound: Thermal Grizzly Kryonaut
    Motherboard: Asus PRIME X570-PRO
    Memory: Corsair Vengeance LPX 32 GB (2 x 16 GB) DDR4-3200 CL16
    Storage: Samsung 970 Evo Plus 1 TB
    GPU: Asus GeForce GTX 1080 Ti 11 GB Turbo
    GPU Cooler: Kraken G12 + NZXT Kraken X52
    Case: Fractal Design Meshify C
    Power Supply: SeaSonic PRIME Ultra Titanium 850 W 80+ Titanium + Phanteks White Extentions
    Operating System: Microsoft Windows 10 Pro OEM 64-bit
    Case Fan: 3 x Noctua NF-F12 PWM chromax.black.swap + 2 x Noctua NF-A14 PWM chromax.black.swap + 1 x Noctua b9 
     
    The top rad ended up being a ridiculously tight fit with the rad touching the IO shield, front rad and rear fan. There was barely 1mm of wiggle room in any direction or at least thats how it seemed. The cable management was also a nightmare because of all the AIO cables and the 500mm extentions and radiators clogging up the case. I also ran the firmware update for both AIOs in CAM and it was interrupted by some other program shutting the PC down. For a moment it seemed that both were bricked but I managed to recover them with the reprogramming tool.
     
    All in all very long wait and very stressful build but the results are awesome and I'm quite proud. This PC is going to be my gamedev, design, and gaming workstation. 
     
    CPU settings are stock and haven't touched RAM either... yet:
    https://www.userbenchmark.com/UserRun/19525415
    Cinebench R20 - 7048
     
    Pics:



  5. Informative
    ManEatingFridge reacted to TheNaitsyrk in "Predator" Dual AIO 3900X Build   
    I like it, looks good. I'd pick very similar items if I had your budget.
     
    I did computer games development, and graduated. If you'll be doing game design and if you want to render 3D models, add as much RAM as you can. Your system will eat whatever you give it to render stuff. Not even a joke. I myself got 64GB.
  6. Like
    ManEatingFridge got a reaction from TheNaitsyrk in "Predator" Dual AIO 3900X Build   
    The almost two month wait for my 3900X has ended and I've finally completed it!
     
    CPU: AMD Ryzen 9 3900X
    CPU Cooler: NZXT Kraken X62
    Thermal Compound: Thermal Grizzly Kryonaut
    Motherboard: Asus PRIME X570-PRO
    Memory: Corsair Vengeance LPX 32 GB (2 x 16 GB) DDR4-3200 CL16
    Storage: Samsung 970 Evo Plus 1 TB
    GPU: Asus GeForce GTX 1080 Ti 11 GB Turbo
    GPU Cooler: Kraken G12 + NZXT Kraken X52
    Case: Fractal Design Meshify C
    Power Supply: SeaSonic PRIME Ultra Titanium 850 W 80+ Titanium + Phanteks White Extentions
    Operating System: Microsoft Windows 10 Pro OEM 64-bit
    Case Fan: 3 x Noctua NF-F12 PWM chromax.black.swap + 2 x Noctua NF-A14 PWM chromax.black.swap + 1 x Noctua b9 
     
    The top rad ended up being a ridiculously tight fit with the rad touching the IO shield, front rad and rear fan. There was barely 1mm of wiggle room in any direction or at least thats how it seemed. The cable management was also a nightmare because of all the AIO cables and the 500mm extentions and radiators clogging up the case. I also ran the firmware update for both AIOs in CAM and it was interrupted by some other program shutting the PC down. For a moment it seemed that both were bricked but I managed to recover them with the reprogramming tool.
     
    All in all very long wait and very stressful build but the results are awesome and I'm quite proud. This PC is going to be my gamedev, design, and gaming workstation. 
     
    CPU settings are stock and haven't touched RAM either... yet:
    https://www.userbenchmark.com/UserRun/19525415
    Cinebench R20 - 7048
     
    Pics:



  7. Like
    ManEatingFridge reacted to jiyeon in "Predator" Dual AIO 3900X Build   
    Awesome-looking black and white build! Dual AIOs always look the coolest.
  8. Like
    ManEatingFridge got a reaction from jiyeon in "Predator" Dual AIO 3900X Build   
    The almost two month wait for my 3900X has ended and I've finally completed it!
     
    CPU: AMD Ryzen 9 3900X
    CPU Cooler: NZXT Kraken X62
    Thermal Compound: Thermal Grizzly Kryonaut
    Motherboard: Asus PRIME X570-PRO
    Memory: Corsair Vengeance LPX 32 GB (2 x 16 GB) DDR4-3200 CL16
    Storage: Samsung 970 Evo Plus 1 TB
    GPU: Asus GeForce GTX 1080 Ti 11 GB Turbo
    GPU Cooler: Kraken G12 + NZXT Kraken X52
    Case: Fractal Design Meshify C
    Power Supply: SeaSonic PRIME Ultra Titanium 850 W 80+ Titanium + Phanteks White Extentions
    Operating System: Microsoft Windows 10 Pro OEM 64-bit
    Case Fan: 3 x Noctua NF-F12 PWM chromax.black.swap + 2 x Noctua NF-A14 PWM chromax.black.swap + 1 x Noctua b9 
     
    The top rad ended up being a ridiculously tight fit with the rad touching the IO shield, front rad and rear fan. There was barely 1mm of wiggle room in any direction or at least thats how it seemed. The cable management was also a nightmare because of all the AIO cables and the 500mm extentions and radiators clogging up the case. I also ran the firmware update for both AIOs in CAM and it was interrupted by some other program shutting the PC down. For a moment it seemed that both were bricked but I managed to recover them with the reprogramming tool.
     
    All in all very long wait and very stressful build but the results are awesome and I'm quite proud. This PC is going to be my gamedev, design, and gaming workstation. 
     
    CPU settings are stock and haven't touched RAM either... yet:
    https://www.userbenchmark.com/UserRun/19525415
    Cinebench R20 - 7048
     
    Pics:



  9. Like
    ManEatingFridge got a reaction from For Science! in Meshify C dual rad   
    Thanks man, I'll try the 280 out in shop somehow if I can but looks like it'll be fine. I see you have superior noctua fans as well. Truly a man of culture. Awesome build, I'll try and reach your level one day
  10. Informative
    ManEatingFridge reacted to SolarNova in 1080 Ti Aorus overclocking advice pls   
    Thats probably +150 above reference.
  11. Agree
    ManEatingFridge reacted to Spotty in 1080 Ti PCBs and prices   
    Ah I just went off the MSRP listed on the website which says USD $89.99 excluding tax.
     

     
    Still think it isn't worth it at $60 though, unless you're talking about a blower style FE card. If it's something that you're interested in, then why not buy the used card first and see how it performs before deciding whether or not to buy the cooler? If it's fine then you can leave it as is and you haven't spent any money you didn't need to. If it sucks and runs at 80+C then buy the other cooler.
  12. Informative
    ManEatingFridge reacted to Fasauceome in 1080 Ti PCBs and prices   
    If you're only doing a light overclock, you should just let GPU boost do its thing and boost the card for you. You aren't missing out on much with reference, only matters for high end overclocking.
  13. Like
    ManEatingFridge reacted to OfCHRONicle in PC upgrade question   
    Thanks for all the quick replies (sorry for not getting back so quick but gotta get those hours in at work to save up for this build). I think I am just going to save my pennies and get the new 9th gen when they come out. Thanks again to everyone that gave their input!
  14. Agree
    ManEatingFridge reacted to Plank in New products that should be released like right now   
    The Monitors you can grab through to kick the ass of all the annoying kids in the games you play. So they lose their teeth for insulting 24/7
  15. Like
    ManEatingFridge reacted to onemanarmy720 in $250 for new I7 8086k a good deal?   
    got it!
  16. Like
    ManEatingFridge got a reaction from pzspah in Smallest itx case that would fit 280+120 aio?   
    Well Mesify C Mini should be a sensible choice and would fit those aios (assuming the usual Asetek rad thickness). I don't know of any itx only cases that have room for a 280. Why do you want as small as possible?
  17. Agree
    ManEatingFridge got a reaction from dcgreen2k in New products that should be released like right now   
    Don't remind me man. You don't know how bad I wanted a roadster this summer. I would have had the perfect excuse to take it on multiple long cruises... 
  18. Informative
    ManEatingFridge got a reaction from NickPickerWI in PC upgrade question   
    I agree here. Aside from that last sentence. The new chips come with a new chipset (Z390). Everyone seems to screw 9000 series information up on their own way lol. 
     
    But yeah I'd wait and get 9700k because of the soldered IHS and 2 extra cores. If you only plan on gaming then don't bother. https://youtu.be/gMFd0aVhVKU
  19. Like
    ManEatingFridge got a reaction from Zando_ in Most versatile case around $100-150 max   
    For me they're all versatile and well put together enough but I like the looks of the Meshify C the most and that's what decides it.
  20. Like
    ManEatingFridge reacted to ChaseDown in Cpu confusion   
    Thank you. This answer is very helpful to me.
  21. Like
    ManEatingFridge reacted to NickPickerWI in PC upgrade question   
    If it's cheaper, you could get a 6700k for that motherboard. The 6700k is still 14nm, and is still a great chip.
     
    You aren't likely to see any benefit whatsoever in putting a 7700k over a 6700k into that motherboard. The 7700k benefits, real-world, have more to do with the Z270 motherboard architecture than the actual chip.
     
    Otherwise, if you're going to update the motherboard, then I would upgrade to the Z370 platform instead. You can then go up to the current 8700k, or wait for the new chips for Z370.
  22. Like
    ManEatingFridge reacted to NickPickerWI in PC upgrade question   
    Crap, I didn't know that. Thanks for the correction!
  23. Like
    ManEatingFridge got a reaction from telekata in Top of the line displays coming out soon   
    I'll be building a new system in 8 months time and accompanying it with a new monitor. Looking for high end with high refreshrate IPS (need the accuracy). I was thinking PG35VQ since it seems op. Anything I've missed? List the standout features. 
     
    PG35VQ is a curved ultrawide 3440:1440, 2500:1, 200 Hz, Gsync, 10-bit color 125% sRGB. 
  24. Funny
    ManEatingFridge got a reaction from Fasauceome in $250 for new I7 8086k a good deal?   
    Holy shit. Godspeed son. 

  25. Agree
    ManEatingFridge got a reaction from TechyBen in what PC spec could help get games to run 4K, HDR max settings, 10bit, ray-tracing at 98fps?   
    You must have a lot of cash to throw around to be concerned with that distinction... 
     
    Does PG27UQ even have the color performance to display that accurately?
×