Tomaha4k_2k3

lmao i got the thumb screws so tigh that i have to use a screw driver to unmount it

My pc specs r in my bio discription But here is a brief one: i5-8600k stock 4.3ghz at stock 16gb ddr4 3200mhz corsair vengance 2,256gb hdd 128gb ssd 1070 ti msi gaming Z370 a pro msi mobo 3 fans pulling out at 1600rpm aio cooler maxed out fans at 1850rpm My temp idle is around 40-45 Gaming around 60-70 usually 65 But when i oc it to 4.8ghx at 1.2volts The temp gets to 75-85 under 100% load Is the oc temp safe

alrightbud thx

thans buddy, but it does gets to 80, like for 1 second, and then drops to 69 and then hops around 70-75

1.35

I have an i5-8600K overclocked to 4.7GHz, with Corsair H100i Platinum RGB 240mm AIO, two fans at 1800RPM, ambient temp of 22 degree celcius on an open test bench. The thermal paste I used is an Artic MX-4, and I used the even spread method covering the WHOLE IHS. I want to know if these temps are normal. Thank you! Here's my system full spec: MSI Z370 A-Pro mobo 32GB Corsair Vengance RGB DDR4 3200MHz MSI Gaming X 1070 Ti 2TB +250GB HDD 128GB SSD

Wow thanks guys for replying, and helping out and hearing your opinions!! XOXO

i will look out for that thanks bud

Its an old one. My motherboard is 1 year old and i got the cpu 6 months ago. The cooler i got was 4 months ago. But I did do something with the cpu today which i forgot to mention... I spread out the cpu with a thin layer of thermal paste, and also spread out a thin layer of thermal paste on the cooler itself as well.

My aio is set manually to 1900rpm at all time

Well my AIO is set manually to Max 1900rpm at all time

I'm concern that there's a problem with my i5-8600k At idle the temp is 40 degree celcius, with ambient temp of 23 degree celcius. With Corsair RGB Platinum 240mm AIO cooler. Fan speed is at max 1900rpm on two fans

I have an i5-8600K overclocked to 4.7GHz on all 6 cores, with Corsair H100i RGB Platinum 240mm AIO, with all 2 fans running at 1900RPM. As you can see in the pic it's clear that the temp goes on in a trend, the cpu is also being utilized 100%, and I use Intel XTU for stress testing. The highest temp it got to is 85 degree celcius, and the lowest it got to during the stress test was 68 decree celcius. Here are the photos.

Just want to know your thoughts on this thermal spread :))