Scorpio_007

it could be a bad psu, if it worked with the old one

Yes, try using the PSU from your old pc

try remounting the cpu cooler, if you have thermal paste, i had a similar problem, and it was a bad mount, so try that

try putting the ram stick in the 1st slot from the right, don't you have any other psu laying around, just to try if it would turn on?

leave it plugged in and upload the picture

what cpu cooler do you have? aftermarket? if yes see if there is enough mount pressure

try with just 1 ram stick

cpu power plugged in? what psu do you have?

see if the RAM is compatible with the CPU not the mb. What ram do you have?

see if the ram sticks are compatible with this cpu, or try taking the cooler off and putting it back on

i tried using hp format tool as you said, it doesn't work, it says it write-protected, in disk management it sees it asa raw partition so i can't create a new partition

Hi, i have a problem with an usb drive, i wanted to format it, windows could not complete the format because there was an error, and now my usb drive is shown as a raw partition and in read-only state, i can't do anything. What can i do to fix it?

Hi i have a problem with a USB drive, i used it twice and it worked perfectly, after a period i wanted to use it again and now i get the sound that i connected it to my pc but nothing else. It appears as shown in the picture. What can i do?

It doesn't feel like it's loose when i push it, and my temp are 16 in idle and 60 when full load. I was thinking about the cpu socket itself being loose, could that be it?

No, no noise, it runs smoothly when it does. and yes, all connections are ok.