Jayden Preciado

Ok, I got to BIOS on the pc, one of my memory sticks is registering on the B2 slot, however, the other is not. PC can boot though, is this a sign that it’s possibly fried?

I installed it to a2 and b2 now, how do I clear CMOS with paper clip method? And how do I know if it actually cleared?

I re arranged it to a1 b1, when that didn’t work, I re arranged it to what it was before and got same result.

I re-arranged my memory on my PC, booted it, and no post, DRAM is yellow and when I press MemOK my motherboard DRAM light starts flashing yellow, specs are on profile.

is there some sort of adapter type thing I can get instead of getting a new board? I really dont have the money.

Here is the manual https://dlcdnets.asus.com/pub/ASUS/mb/LGA1151/TUF_Z270_MARK_2/E11892_TUF_Z270_MK2_UM_WEB.pdf/ Here is the product. https://www.newegg.com/p/1JW-00DU-00004?item=9SIAJHS9TU5093&source=region&nm_mc=knc-googlemkp-pc&cm_mmc=knc-googlemkp-pc-_-pla-ang+sai+store-_-motherboards+-+intel-_-9SIAJHS9TU5093&gclid=CjwKCAjwtO7qBRBQEiwAl5WC23qhzNM85CAD3WvsKqBqj7wyVo7R4XP74n6gl3rT-Cyov-hATOIj7xoCr7YQAvD_BwE&gclsrc=aw.ds Im trying to connect the cables for my rgb fan into the JRGB port. dunno where that is on this motherboard tho.

Here is the manual https://dlcdnets.asus.com/pub/ASUS/mb/LGA1151/TUF_Z270_MARK_2/E11892_TUF_Z270_MK2_UM_WEB.pdf/ Here is the product. https://www.newegg.com/p/1JW-00DU-00004?item=9SIAJHS9TU5093&source=region&nm_mc=knc-googlemkp-pc&cm_mmc=knc-googlemkp-pc-_-pla-ang+sai+store-_-motherboards+-+intel-_-9SIAJHS9TU5093&gclid=CjwKCAjwtO7qBRBQEiwAl5WC23qhzNM85CAD3WvsKqBqj7wyVo7R4XP74n6gl3rT-Cyov-hATOIj7xoCr7YQAvD_BwE&gclsrc=aw.ds Im trying to connect the cables for my rgb fan into the JRGB port. dunno where that is on this motherboard tho.

I don't really know, but its working!

I did it! Its green! FUCK YEAH!!! Lets go!

I figured out how to populate the black ones, 1,3. still yellow blinking every time I press the memOK button.

I keep clicking the memOK button every time im booting right now.

.It clicked on the white ones, 2, 4, but not the ones he said I should install it. 1,2. My cards are 16gb from the id/

This better?

Here you go. Checked ram slots again as well.

I am not getting output, probably do to the DRAM_LED light being yellow

DRAM_LED

I also noticed that the memOK lights are yellow.

https://www.newegg.com/gigabyte-geforce-gtx-1660-ti-gv-n166toc-6gd/p/N82E16814932131?nm_mc=knc-msnsearch&cm_mmc=knc-msnsearch-PC-_-pla-_-video+card+-+nvidia-_-gigabyte-_-14932131&msclkid=9db060daab96160026f13d86824a8c32&gclid=CKyco_T4keQCFW2YxQIdAiENgQ&gclsrc=ds

The graphics card fans wont spin because I presume its off. However I plugged in the pci-e cable so it should boot up.

I got the 2 ram sticks in the 2 white slots, but its still posting yellow.

By the way, the gpu isn't spinning either. Also, here is the correct link for the ram https://www.newegg.com/patriot-8gb-288-pin-ddr4-sdram/p/N82E16820220998?nm_mc=knc-msnsearch&cm_mmc=knc-msnsearch-PC-_-pla-_-memory+(desktop+memory)-_-patriot+memory-_-20220998&msclkid=2dea662612aa17e9ab5c3b7a30b3c887&gclid=CIPlq73xkeQCFfGTxQIdSPEB7w&gclsrc=ds

Im putting it in the black slots, and yeah im applying a lot of pressure

Im 100% sure Im doing it the right way, I tried both ways none of them went in

I also noticed that the ram doesn't snap into place.

tuf z270 mark 2