-
Posts
42 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Everything posted by nour999
-
I was looking for an audio Interface, as I wanted to get an xlr later on, You got any recommendations under 200, that Will Give me xlr and High quality amp?
-
Got it Thank you
-
https://www.amazon.ca/Behringer-UMC202HD-Interface-Microphone-Preamplifiers/dp/B00SAV0VP0/ref=sr_1_15?dchild=1&keywords=audio+interface&qid=1635057950&sr=8-15 Do you think this amp will be able to Power the 990 Preiumum, they are 600 Ohms, But The amp doesnt say max supported
-
Ok ok appreciate the Software Idea, will look into it.
-
Right Now I got the ATH M40x, Its just impossible to tell when audio is behind me, You Think i could just get away with getting an amp and better Pads?
-
I am for sure getting a good amp, I just need something that will give me the most accurate footsteps really
-
They Look nice, but the drivers are 38mm?, I have the audio tehnica m40x rn , and its 40mm and it feels small. Would that be a problem with them, I have the budget to spend more to get bigger drivers.
-
So I am currently in the market of upgrading my audio setup, I mainly play a lot of r6 and completive games, and listen for hours of music each day, I was wondering whether I should resort with the IE300's IEM's or the Over ear 990 pros, Main concern is that the IE300s would not have good enough imaging. All feedback appreciated.
-
I have old drivers from around 2018, should I install those instead?
- 7 replies
-
- laptop
- gaming laptop
-
(and 3 more)
Tagged with:
-
I have cleaned it 4 month ago, when I replaced the hdd with an nvme, and then used a cool hair dryer to remove all the dust. I have not tried replacing the thermal paste however
- 7 replies
-
- laptop
- gaming laptop
-
(and 3 more)
Tagged with:
-
it gets worse and worse every couple of nvidia drivers, so yes over the alst 2 years
- 7 replies
-
- laptop
- gaming laptop
-
(and 3 more)
Tagged with:
-
A couple of years ago, I bought an asus gl553vd which has a core i7 7700hq (3.6ghz on boost 4c/8t) 16 gb ddr4 2166mhz ram gtx 1050 4 gb model I installed rainbow six and cranked the settings all to the max, and was able to run everything on 70-80 fps, today 2 years later, I cant even run the game at half the resolution, with render scale at 25% and all on low. I noticed that the CPU has dropped down to 1.6 GHz when I had siege open, more info from open hardware monitor and others games is under, was wondering if there is any way I can fix this problem ( and yes newest bios was pre installed as well as NVIDIA drivers)as well as last pic shows pc turbos to 3.6 when idle only
- 7 replies
-
- laptop
- gaming laptop
-
(and 3 more)
Tagged with:
-
I recently plugged in an old hard drive that I found laying around. I installed hard desk sential and I got this, Also on boot I get the S.M.A.R.T activated in the bios, is there i could relocate and fix the drive?
-
An idea for a new sub forum : Tech scams We all get bombarded by lots of them everyday usually. and they seem to have lots of new ways to jebait people other than the good old 'Nigerian scam'. just finished reading a book about the scammers and how they operate. apparently they work in groups and they share all their assets together lots of them based out of southern Africa. so why not do the same, and start our own little sub forum where we disscus what methods they use. and we all will become a little more educated about the scams
-
open back while give you kind of a open stage feel ,would not recommend if you have a noisy environment as people around you will hear what you are hearing easier and you will also hear them easier as for closed back that is any normal headphones
-
Rx580 screen flickering and "star-like" graphic glitches
nour999 replied to Roderich's topic in Graphics Cards
i would try using the 960 in the new system just to double check that the issue is from the gpu , then i would try to return it and get another one as it might be a defect- 1 reply
-
- rx580
- video card
-
(and 2 more)
Tagged with:
-
Ryzen - Memory speed or capacity?
nour999 replied to Uchia18's topic in CPUs, Motherboards, and Memory
if i am not correct pretty sure AMD cups like the ram speed and the capacity shouldn't change anything as long as are not using it ,i would only recommend upgrading if you are running out of ram -
rn i am using the corsair hs 60 and i love it but it will give you fatigue if you use it for long periods of time pretty sure one of my friends got the razer kraken v2 and he says it is godly and way better than his hyper x cloud 2 he says he does not feel the weigh of it on his head and that the 7.1 surround in it ,is the best he tested
-
even though you will put your os and main programs on the ssd i would recommend getting a 7400 rpm hhd instead of a 5400 as it might me too slow and take time when loading some tasks, would also recommend getting a core i7 8700k instead of a non k and maybe asking again on how you can overclock it so you get better performance
-
if you are buying a gtx 1070 and worried about he power delivery ,yes a 500 watt psu should be enough ,but i guess if you are at full load on both the cpu and GPU would recommend maybe a 700 watt just so you have some headroom
-
but are u sure if i get that switch and connect the mac and printers via Ethernet it will work?
-
one of the printers is Epson and when i tried to connect it to the network and have the mac on the same network i kept trying and the mac would not detect it wirelessly even though i already set up the drivers of the printer on the mac .that is why i am buying a switch
-
hi there i am new to the networking stuff and in my school i have this setup of 4 macs and 4 printers ,my plan is to buy a network switch and connect the 4 i macs and the 4 printers i have . so that i am able to print from any mac to any printer i went on amazon and found this network switch : https://www.amazon.ca/TP-Link-TL-SG108-1000Mbps-Desktop-Gigabit/dp/B00A121WN6/ref=sr_1_5?ie=UTF8&qid=1546888663&sr=8-5&keywords=Ethernet+switch was wondering if i plug all the mac and printers via Ethernet will it work ? or not or if there is any easier or better way i can do this .thx in advance