noobftw

I have this exact same issue with same specs apart from 13900k and ram speed 7800, i'm certain it's the trash RAM, just ordered some TeamGroup 7600MHZ Sticks. If that fixes it then this RAM will be going back. If not, i will be sending the motherboard back for sure. I have tried two different 13900k's in it, exact same issue.

What are the correct CPU temps, RealTemp, HWInfo or HWMonitor. Which one is the most accurate? Why are they all different...

Yeah, i think im gna pass, just not worth it at all.

Those runs will be really tight and hard to accomplish with soft tubing, no?

Hi, What is the optimal way for me to include my VRM's into the loop, I'm not even sure if it's worth it tbh, but it seems like a wasted opportunity. Would lower VRM temps mean lower CPU temps or vice-versa? The temps of the motherboard, PCH and VRM don't go past 60c while gaming.

No, as XMP is the stock setting that the RAM is specified at. When i overclocked them to 3800 it shoots the temps right up. I will try the overclock with the volts you recommended.

Is this a stupid question, or is the system agent basically just the DRAM Core Voltage, i reverted my RAM to stock and both the VCCIO and system agent dropped to 1.1 and 1.2. Anyway i can maintain the original RAM overclock and try lowering those voltages manually? Failing that i will buy some of that new 2x16 Trident Z Royal Elite 4000Mhz cl 14 stock, would that fix the issue?

I have x4 Corsair dominator 3200 sticks clocked at 3800 with 1.48 core voltage, If i was to set the VCCIO and system agent manually, is there a number you might recommend?

I have x4 Corsair dominator 3200 sticks clocked at 3800 with 1.48 core voltage, If i was to set the VCCIO and system agent manually, is there a number you might recommend? Also, my system agent temp is the exact same 1.408 at stock, even with MCE disabled, :/, could that be a bug, or a different setting in the bios.

6 is medium on the Asus Maximus Formula z490

Does the below look ok/safe for 24/7 OC, I will be gaming mostly and the temp never go past low 70's. I'm more concerned/confused about the Vcore, i have set 1.38 Vcore in the bios for 5.2Ghz, cache ratio 49, LLC 6 and all is stable. I will also be deliding the CPU to try drop 5-10C. FYI, i am running dual 420 rads and a single D5 pump with a 3090FE in the loop. I'm most confused between VCORE and VID #0-9, which one shows the actual voltage the CPU is receiving?

Also, dual channel or quad channel.....

Perfect, thanks for that, Is there a diminishing speed for memory when gaming, or is it worth going 4000 upwards, low latency/timings for extra FPS..

Is an 11th gen chip needed for support of faster RAM

One last question regarding DRAM, what kind of memory kit (speeds of 3800Mhz upwards of 4800Mhz) will be supported with a 10th gen chip in z590 board?