Hello
I decided to build my own custom case from scratch because the caces that were on the market did not meet my expectations of both appearance, compatibility, etc, and already somehow found it was awfully expensive. In this way, the idea was that I would create such a case myself;)
The design is mine, all the pieces are done alone and are still under construction.
The decision was that it would be a Miedium Tower. It will be made of PMMA material with the possibility of making changes at any time. It will be made of individual modules twisted together with the cube with threaded holes. If you need to change any item, I modify it or make a new one.
Little data.
dimensions:
Frame + covers 535x460x226 + glass 547x472x250
Fans:
Front x3 120
Top x3 140
Back x1 120
The frame will be made of black acrylic 3mm thick + on it will cover the mirror or black mat also 3mm thick. All this goes for "smoked glass" ie PMMA 5mm separated by sleeves and chamfered edges of 45 degrees and polished diamond cutter.
Below I upload some photos from the prototype of the rack.
Stage 2
All elements already cut from the target material (at all still protective film)
Left to make the nuts to screw "glass" and put the residue.
Next step, look for parts to fill the case inside. Only then will I take up the layout of the interior.
Stage 3
Some photos from sponsors
Plans have changed a bit and parts from be quitet! I will use for another project that is already in my head
This project will only include Straight Power 10 600W
First attempt of custom reservoir
I have also got a motherboard and a processor but I need to take pictures
Thanks to the mainboard I can continue to work so you can expect in the next time the progress of the work
To be continued...
PS
Sorry for my English
