Marfe

Wait for the 2070/80/80Ti to lunch then buy a 1070/70Ti. I’m sure those card will drop prices.

Does it have a color wheel? Just want to confirm because for example, my MSI B350M Bazooka says it “supports” Mystic Light but when I put a LED strip to it a few months ago(before I bought NZXT Hue+) I have very limited animations(like breathing and static) and only has few selection in color, not the full RGB color wheel. I posted on MSI’s forum and they said only the high end boards comes with the full array of animations and color wheel.

Planning to buy a used Strix 1080 from a friend of mine(Don’t worry he didn’t use it for mining) because he is moving out of country and not going to bring his PC with him. I just want to ask, can I control the lighting of the Strix 1080 in GPU Tweak II? I have a MSI motherboard so ASUS Aura Sync software is not an option. I’ve searched in youtube about GPU Tweak II but unfortunately all of the videos are about overclocking their GPU. I don’t care that much about syncing the movements of the light, all of my RGB lighting are from NZXT anyway, I’ll just set the GPU lights to static. What’s important is the color wheel. I have a White build and my led lights are set to blue(with a hint of green) 0,60,255 and I just want the GPU lights to match the color.

Could use a white AIO Sleeving from cable mod to match the white bar of the case. My rig.

I sent an email to Support@CableMod.com they just said that I should just buy directly to them, but the sleeving + shipping will cost $50. So I sent an inquiry in Amazon JP to CableMod JP and they said that they will look into it. After a few days they sent me an email that the white AIO sleeving is now posted on Amazon JP for about $22 (Free shipping). I ordered 2 days ago and it arrived now. Looks freakin good IMO

Thanks. Ill send an email to the support. Btw, does this also support Kraken X72?

Good day! I want to put white sleeves on my x72 to match my white build. Unfortunately the white CableMod AIO sleeve here in Japan costs $125 while the red one is $25. Now Im planning to buy the red one and just painting it white. I just want to ask how and what should I use to paint it. Thanks.

I bought a big ass acrylic sheet (3mmx600mmx900mm) at our local hardware store for my side panel and the dimensions of my side panel is only around 500mmx600mm so i have a lot of extra acrylic sheet. I used the acrylic sheet to extend my PSU shroud. But you need a heat gun to bend the acrylic sheet. Just measure the dimension of the case PSU and hard drive bay then buy the size that's enough for the PSU and HDD bay.

Thanks!

It's the same PC. I just transferred it to a bigger case.

I actually went ahead and made some modification to my case yesterday. I bought an Acrylic sheet and made the side panel full window (If felt like the borders of the MasterBox 5 sidel panel are too thick) and I extended the PSU shroud to cover the hard drive bays.

Back in Aug 2017 I decided to build my first PC. I don't care about aesthetics. I just wanted to play games. CPU: Ryzen 5 1600 Motherboard: MSI B350M Bazooka GPU: MSI GTX 1060 3GB Aero ITX OC Ram: Corsair LPX 2x8GB 3000mhz DDR4 PSU: Antec Neo Eco 650W 80+ Bronze Storage: • Samsung 850 Evo 250GB (Boot Drive) • Western Digital Blue 1TB (Anything Library) Case: Silencio 352 (mATX Form Factor) And it ended up like this After a few months of watching PC Builds on youtube (specially this one) I decided to change my case to have a windowed side panel so I decided to buy a MasterBox 5 White. I also bought a cheap RGB Strip with controller to light up my case. After a few weeks I decided to buy some white PSU extention to remove the hideous ketchup and mustard cable that my PSU has. A few months ago I decided to paint the PSU shroud and hard drive bay white to match the case. Last week I was in Akihabara and I bought an X72 for a really good price (It was the same price with the X62 so I picked the X72). I also bought NZXT Hue+, AER RGB fans. Then I decided to buy some acrylic sheet to change the side panel of my case (I know it is already a windowed side panel but I think the borders of the side panel of the MasterBox 5 is too thick) I also made an extention of the PSU shroud to cover the hard drive bay. All of those things installed and it ended up like this. (Background noise was my air conditioner) I know the white cable for the AIO is ugly but it will do for now. I can't find some braided sleeving to cover the AIO tubing and the CableMod AIO Sleeving kit on amazon here in Japan is very expensive. EDIT: I sent an email to Support@CableMod.com they just said that I should just buy directly to them, but the sleeving + shipping will cost $50. So I sent an inquiry in Amazon JP to CableMod JP and they said that they will look into it. After a few days they sent me an email that the white AIO sleeving is now posted on Amazon JP for about $22 (Free shipping). I ordered 2 days ago and it arrived now. Looks freakin good IMO What do you guys think?

So I bought some acrylic sheets and made a few changes to my case. Made the whole side panel acrylic and extented the PSU shroud . What do you guys think? It came from this (Case was silencio 352) to this (bought an Masterbox 5) to this (painted the PSU Shround) and now this. <3

I used the wrong mounting screws. I didn't read the paper manual, i just watched the video manual. Apparently the video manual that says AMD is for the older sockets. After I read the manual I found out that the screws for AM4 are not the one that I used. Temps are OK now. Max temp while doing stress test is 50C.

Isn’t that backplate for Intel?

I just bought an X62 (w/ AM4 Bracket) mainly for aesthetics but I’m wondering if I installed it the wrong way or something... My CPU is a Ryzen 1600 running 3.8Ghz @ 1.35V and my temps are same (60C while stress testing) when I was using my Hyper212 Evo. Fans are running at 70% fixed while the pump is running at 80% fixed. The backplate of my motherboard fell off when I removed the Hyper 212 but I just put it back on to mount the X62. I checked if the plate of the X62 is having contact with the CPU and it was. I tried removing and repasting an MX-4 Thermal paste but still same results. After I installed the X62 again I tried to shake the mount and it wobbled a bit. Is it because of the backplate that’s not sticking to my board?

Got it. Thanks!

X52 has a 240mm radiator(120mm x 2 fans) while the x62 has 280mm radiator(140mm x 2 fans). The X62 outperforms the X52 because it has a larger surface area.

Good day! I’m planning to change the side panel of my MasterBox 5 White to full Acrylic side panel. I just want to ask. Is 2mm acrylic enough? Or that’s too thin? I live in Japan and I’m going to order through amazon and the price of 2mm acrylic is ¥1,500 while the 3mm is ¥3,000.

No there isn't.

I was actualy thinking about that...

Good day! I'm currently playing around with RGB for my PC and the LED on my motherboard is driving me crazy. I have a B350M Bazooka that has white LEDs at the back. When I use the MSI Gaming App to turn off the LEDs it also turns off the lights of my Razer mouse and keyboard. Is there any other way to turn off the motherboard LEDs? Like in the bios or something?

Windows resolution is set to 4k. Dota 2 is in 1080p. I don't want to play in 4k because my FPS sometimes drops to 50fps so I just want to play in 1080p. PUBG also has this mode but it stretches the game so no problem with that.

Good day! I'm having trouble setting Dota 2 in Borderless Window. I have a 4k TV hooked up to my PC and I just want to play Dota 2 in 1080p in Borderless Window. Unfortunately this is what is happening. I want to play in borderless window because I want to switch apps very quickly and I noticed that when i'm in full screen mode it takes time to switch apps. Is there anyway to fix this?