H4L0Monster
-
Posts
109 -
Joined
-
Last visited
H4L0Monster's Achievements
-
Not in clip atm. I had gotten another M.2 to boot up windows. The new one did not come with a screw. So I cannot mount the old one until I get another. But the formatting reaches 100% and the quote error is "incorrect parameters". But when cleaning it says incorrect procedure after a few minutes after hitting enter on Clean or Clean all. Clean all took about 30 minutes before saying so.
-
RE: To prefix, I can only find my older post on this topic that seems to have died, and this same topic in storage forum. If this is the wrong place let me know! I have a 128Gb NVME drive from KingDion that will not format. Using diskpart i can get to 100% then errors out saying incorrect procedure. Following others suggestions I have ran both a clean and clean all command however both error out incorrect as well. Is there any way to get past this without downloading some random program?
-
H4L0Monster changed their profile photo -
To prefix, I can only find my older post on this topic that seems to have died. If this is the wrong place let me know! I have a 148Gb NVME drive from KingDion that will not format. Using diskpart i can get to 100% then errors out saying incorrect procedure. Following others suggestions I have ran both a clean and clean all command however both error out incorrect as well. Is there any way to get past this without downloading some random program?
-
Ran into a problem when installing windows. Not sure what happened. Logged into my previous windows and the drive said it was working fine with all files intact. I reformatted the drive via CMD Disk Part List Disk Select Clean Format FS=ntfs It made it to 100% then errored out. Something like incorrect procedure? I tried to clean and format again then it errors out at clean incorrect something else. Rebooted my pc and now its stuck on a select keyboard input type? I can't get past it. And repair tool does nothing.
-
Doing a bit of research i found an older thread saying he tried moving his GPU... sure enough looks like its working. Ill keep tabs to make sure it goes through.
-
So I think what is happening is it is trying to boot from the NVME regardless of any other drive or the boot USB when plugged in. I am just not sure how to force it to not do that when the nvme isn't plugged in.
-
No boot is happening. The monitor notices power when the pc is turned on. But says no input then shuts off.
-
I have no motherboard speaker/buzzer and no case speaker? I'd what that is. The only thing that showes any progress or stoppage is the M.2 has a LED that flashes twice a brief pause then once again. Couldn't find anything online about it though. And I have seated the m.2 multiple times.
-
This may not matter, as I am fairly new to PC building. However my fans stayed on, RGB stayed on. All for the last hour. But still no display.
-
This pc is completely functional without the M.2 installed. The issue is its running on a laptops old HHD windows so its slow as he'll and I wanted to do a fresh install. All hardware works without it the m.2.
-
I've tried in both locations. My PC doesn't have a wifi card so would that be the lower m.2 slot? And unfortunately I do not have a second device.
-
Recently got a small m.2 to start a fresh windows install. However when it is plugged in it will either not boot at all or I'm not getting display from either graphics card or mobo. Here what I got. Asrock B450 Pro4m Ryzen 5 2600 EVGA 1050ti A random 1tb hard drive from old laptop (has current windows install.) A PNY 250gb sad New KingDion 128gb M.2 NVME What I've done; Tried running just the NVME and boot USB =no display. All mobo fans/RGB come on and keyboard lights on. Tried same with no GPU display from mobo =no display. All mobo fans/RGB come on and keyboard lights on. Tried booting with NVME and PNY =no display. All mobo fans/RGB come on and keyboard lights on. Tried booting with just PNY and boot USB Gets to windows setup fine. Tried with all storage option connected in all possible sata connections =no display. All mobo fans/RGB come on and keyboard lights on. Tried all above with M.2 in second location. =no display. All mobo fans/RGB come on and keyboard lights on. I looked for a similar post but everyone keeps saying to check the nvme in bios. But I can't tell if I'm getting to bios or not due to no display. I believe its just not posting. But am unsure. Any help would be grand!!
-
since this is already running. G.Skill does not show 3000 RAM as compatible with the B450 from asrock. shold i drop to the 2933? or does it actually support 3000 RAM after a bios update?
-
I miss school "hand outs" i use to get windows keys and a Photo Shop for $50. before the whole "program as a service"
-
depending on how long im actually able to keep it. id like to upgrade the GPU, CPU, add RAM, better cooling, air or liquid. and add storage as i go. EVENTUALLY would like it to be able to stream, game, and things such as Photoshop. but not all are on my list at. some simple gaming and simple mods to start. lol
