HasHyy

Thank You John!

Just a small update! Should be paid soon so that I can get that last Noctua ordered for the rear!

Haha thanks dude, yeah I sucked at it too but then kept redoing it till I got it right and having a case with holes and space saves so much time. The last clean out I did I think I took more time on the cable mangament then refitting the computer lol.

You can get them off speedmonkeygraphics on eBay, comes from Australia and comes fairly quick! Here's the eBay ID number and web address: 321089233737, http://ebay.eu/1aVuiZ8

Thanks man

The case is great. You can install up to 9 fans, very sturdy and its got quite a lot of space behind the motherboard tray for cable management. Graphics card wise is great too allowing you to install 12 inch cards in. The case is a lot bigger than normal mid tower cases and looks awesome against a normal sized mid. I always run into trouble with cases due to something not fitting right and having to get the tools out or something similar but with this case I have not had this issue and is a breeze to work with! One downside to the case is that there is not a lot of space for Dual Fan Radiator systems on the top of the case and if you have quite tall ram sticks like the Corsair Vengeance you will only be able to fit one set of fans on it. Apart from that issue I would definitely recommend it, great case!

You can get them off speedmonkeygraphics on eBay, comes from Australia and comes fairly quick! Here's the eBay ID number and web address: 321089233737, http://ebay.eu/1aVuiZ8 I think it looks pretty awesome but I've had a lot of people saying that it wrecks the look of the build but I couldn't stop myself from buying it haha Hope this helped you!

The pictures make the red more outstanding than it actually is lol. It could do with some white LED's but I was trying to stay towards the stealthy black and red look :D Thanks for your input man! Might do it

Thanks for your input guys! I will be getting another NF-F12 in a few weeks and replacing the back AeroCool fan due to the heat from the CPU and the GPU is just circling round the case and it needs a lot more push :D

Haha, yeah I was lucky with the case due to the side window where it stops is right under the Noctuas and you cannot really see them as much as if it was a full windowed panel that and the LED's been stuck on them so it will bring a tad of colour to them haha :D Thanks guys

I have now dug into my pockets again and got a H100i as the old cooler wasn't really cooling it as good as I thought. I OC'ed the 8350 to 4.2GHz and turbo up to 4.5GHz, this will be highered once I have all fans in and time to do it. I also brought Two Noctua NF-F12 for the Radiator and some Red NZXT 2m Sleved LED's! Look at the main Post for updated Piccys!

Upgraded the CPU to the FX-8350 Black Edition :)

Thanks :) I didn't think it would to be honest until I put it against it and it went nicely!

Hello Peoples! This is my Gaming Build that I've had some time on! I've built it from the ground up throughout the years until I'm now finally happy with where it stands :D Here are the specs: CPU: AMD FX-8350 Black Edition 4.0GHz Stock - Turbo 4.5GHz, Overclocked to 4.7GHz (Turbo Disabled) CPU Cooler: Corsair H100i + 2x 120mm Noctua NF-F12 Top Exhaust Fans Motherboard: Asus Sabertooth 990FX R2.0 GPU: XFX 7950 Double Dissipation Edition 925MHz/1225MHz Overclocked to 1075MHz/1375MHz Ram: Corsair Vengeance 8GB (2X 4GB) DDR3 Dual Channel 1600MHz SSD: Samsung 830 64GB SATA 3 SSD HDD: Hitachi 1TB SATA 2 HDD PSU: Corsair AX750W Case: AeroCool xPredator X3 Devil Red Mid Tower Fans: 1x 120mm Noctua NF-F12 Rear Exhaust Fan, 1x 200mm AeroCool Front Intake Fan, x2 Corsair SP120L Turbo Fans Directed To The Graphics Card From The Hard Drive Bays. Others: Red LED's around the case. Pics: Hoping to do an update to it soon and get another 830 SSD and raid them together. Also might swap the rear fan for another NF-F12 ;) Thanks for taking a look at my Build! :) ~HasHyy *Removed Stealth DVD Drive Mod