Jump to content

Grez

Member
  • Posts

    21
  • Joined

  • Last visited

Everything posted by Grez

  1. Hi I have a custom pc that I want to make and I would require to daisy chain 2 Thermaltake PCIe 4.0 extender so I would like to know if I will get bad results. I would need a total of 800mm of extension (600mm and 200mm) I know Linus got 2-3m with PCIe 3.0 but would 4.0 be shorter ?
  2. Hi some time ago I watched a video on youtube were linus made a gaming setup in his house. this pc was in a room upstairs and he was able to play vr in the living room or pc games in a other room. I don't know if I was dreaming of this but if not could you help me find this video please
  3. Hi guys I bought a custom config on cablemod.com for my Corsair RM750x and I am thinking anout selling my RM750x to my friend and buying an HX750i or HX1000i fron Corsair and I want to know if my cables are still compatible with the newer PSU because the configurator on cablemod needs the exact PSU that I use, is it because the pins layout is not the same from PSU to an other ? or it does not matter ?
  4. Hi guys I am building a desk for my computer and I'm wondering if this button will fit for my computer ? Also I would like to know the required voltage for the button because this one is for 3v and down and requires a resistor if the circuit is more than 3v
  5. thanks should I leave the pump always at 50% or always at 100% ?
  6. Hi guys I am building my first custom loop and I am wondering if I need to connect the 4pin connector and the molex of if I can just use the 4pin ? also I would like to know if it is a good idea to connect it to a corsair commander pro or should I connect it only to the pump connector on my motherboard ?
  7. Hi folks I am building my first custom loop and I a wondering where do I buy EKWB parts ? Is it better to buy dirrectly from EK and pay some customs clearance or to buy in Canada (and where to buy) ? If you recommend that I buy on EK website how much will it cost me at customs ? (my cart cost $508.56 USD) Also where do I buy distilled water ?
  8. I dont want to tear it appart ... I just want to use double face tape and stick it on the under side or on the side of my desk but i dont want it to come with a USB connector to plug into the motherboard
  9. really like the picture, not those that fits in to a PC case like this but with a USB 20 pin : https://www.amazon.ca/Plugable-Port-USB-Power-Adapter/dp/B075NMVGP7/ref=sr_1_18?keywords=usb+3.0+hub+to+motherboard&qid=1578677451&sr=8-18
  10. Hi folkks, I am building a DIY desk and I would like to know if an USB 3.0 20 pin female to USB Hub (3+ ports) exist ... kind like this pic ?
  11. I never played with a psu other than plugging psu cables how do I get the 12v from psu ?
  12. Hi, I am starting to build my own Desk and I need a power switch. I am looking for it on amazon but there is too much choice and I don't know what to buy. I know that I want a switch with red lighting but the ones that I find are 12v, 3v, 6v, 5v or do not seems to come with a power switch cable so can someone help me find plz
  13. Hi there, Question for you guys is there any compatibility for the EK monoblock for MSI motherboards (MSI z270/Z370 Gaming RGB Monoblock) with the MSI Z270 Gaming M7, on EK shop they assure the compatipility for the Gaming M3 but not for the M5 or the M7. Is there anyone who knows if it is compatible ?
  14. can't find the battery ... I unscrewed ever srews and I cand find a way to get the motherboard out to look on the other side
  15. Hi there, I think I just did something wrong here. A friend of mine asked me to install windows on this : intel nuc d34010wyk but it would not boot from my usb device so I went in the BIOS and tried to boot from USB but when I rebboted I realised that I enabeled the shell commands ... now i can't go back to the BIOS can someone help me disable the shell commands
  16. Hi there I recently bought a MSI Z270 Gaming M7 and I had no problems until now. I woke up this morning and I tried to launch my PC to play games but after 15 seconds it shut down before the MSI logo pop upor before I can enter the BIOS. I recorded thé Debug LED and got all the codes and found 2 errors codes the 0F meaning “Microcode not loaded“ and the code 55 meaning “Memory not installed“. Can someone help me please
  17. Hi there I recently shopped for a motherboard because I intend to overclock an I7-7700K and I found one that interests me: MSI Z270 Gaming M7 and I noticed that there was a 4 pins and an 8 pins to power the CPU I currently have a Corsair RM750X I wanted to know if: 1. I should change the PSU because there is no 4 pins for the CPU, let me know which PSU would be better (I would like to stay with an Corsair if possible) OR 2. Use a 4 + 4 cable and only connect one of the two 4 pins
  18. Where can i find a I/O power button (it doesn't have to be exactly the same of the build)
×