Jen89

Are you sure about the socket compalibility, because the intel i7's fan (e97378-001) compatible with LGA1155/1156/1150 sockets, and I use the i3 6100 with LGA1151 socket? And do any of you know of an official intel site with their fan specs listed?

No I meant the house I live in and its power consumption limits set to higher, the pc case not flickers cause i turned of the case lights so I can't tell.

ADATA Premier Pro SP900 2.5" 128GB SATA3 ASP900S3-128GM-C Intel i3-6100 CPU and GPU (stock cooler) Coller master 600w psu GIGABYTE GA-B250M-D3H motherboard Kingston 8GB (2x4GB) DDR4 2133MHZ HX421C14FBK2/8 one case fan 9,2 cm 2200rpm

Yes they sometimes flicker, but I have 2 pc at one connector and the other's fine I have a Uninterruptible Power Supply, and set higher than normal voltage/or wattage (sorry I don't remember the right term) to the house. Specs: ADATA Premier Pro SP900 2.5" 128GB SATA3 ASP900S3-128GM-C Intel i3-6100 CPU and GPU (stock cooler) Coller master 600w psu GIGABYTE GA-B250M-D3H motherboard Kingston 8GB (2x4GB) DDR4 2133MHZ HX421C14FBK2/8 one case fan 9,2 cm 2200rpm

I had random reboots with a 10 years old amd PC so I changed everyting even the PSU except the ssd (1 year old adata) and the pc case, formatted reinstalled windows 8.1 and updated it, done a bios reset and update, checked for virus (none) and ssd health (fine), and seen the event logs I had the reboots listed with 6006, 6008 codes but no reasons. These reboots could be after weeks or one after another in a few minutes with no black death just a restart sometimes with automated windows fix. What could be the cause? (It's an intel pc now. I also don't think it's the cooling cause I set that higher now and checking it always, and had stress test too which went fine.) Specs: ADATA Premier Pro SP900 2.5" 128GB SATA3 ASP900S3-128GM-C Intel i3-6100 CPU and GPU (stock cooler) Coller master 600w psu GIGABYTE GA-B250M-D3H motherboard Kingston 8GB (2x4GB) DDR4 2133MHZ HX421C14FBK2/8 one case fan 9,2 cm 2200rpm

--Thanks, since I have the i7's in excess I hoped it would have better cooling for the other, it gets to 55 C with its original cooler.

I suspect my the old front panel wires causing random reboots(I just bought new everything except ssd and case it still reboots). I only want to connect the pc starting wires, would it cause any problem? Which one's should I leave connected?

I’d like to enquire about if Intel’s i3-6100 (LGA1151) stock cooler could be exchanged for i7-4790K (LGA1150) stock cooler for better cooling performance, and more precisely if they sockets would fit?