Jump to content

Brian777

Member
 View Profile  See their activity

  • Posts

    29

  • Joined

  • Last visited

 Content Type 

Everything posted by Brian777

  1. Brian777

    Real talk: how are you supposed to balance time…

    Brian777 replied to STRMfrmXMN's status update

    Military is the best option if young enough. they are always signing up folks, this way free education and if you wanted law enforcement the military has an awesome Military police school ,and or corrections where you can use that as a stepping stone for civilian life after words
  2. Brian777

    Real talk: how are you supposed to balance time…

    Brian777 replied to STRMfrmXMN's status update

    I would probably suggest if at all possible, spend about two hrs then take a break then go back to doing your home work. you would need to take a break at some point to gather your thoughts and, clear your head. What are you interested in doing for a job? Here are just a few suggestions 1, go into the military if young enough (free education) 2,law enforcement, 3 fire fighter, emt 4 pilot just a few suggestions not to sure if your interested in or not just putting it out there.
  3. Brian777
    Brian777

    Today, I will be receiving my 2 new (27 inch) monitors via fed ex. In December I will be getting my very last piece to my new computer  before I take it in to be built, which is my CPU. 8 core 201 V3 Jan 3rd 2018 I will be taking it in for the big build and enjoy my flight simulator once again. I will be buying Prepared 3D V4 and get my rudder peddles. yeaaaaaa can't wait.

  4. Brian777
    Brian777

    I would like to extend my gratitude to all who have explained to me what I had been confused on with my computer build.

    thank you all

  5. Brian777
    Brian777

    you are 100% correct, after find the cable that said CPU on it I looked at both ends and figured out the end that had cpu on it did in deed split in to two 4 pin. that's awesome thank you. maybe  you can tell  were to hook the cable that is showing in the second set of pictures which is a female end.

  6. Brian777
    this is the female end that goes to the mother board I think it connects to the fan connector 1 connection on the mother board
  7. Brian777
    try this pic
  8. Brian777
    the fan controller and the hdd hot swat I have connected to the same cable the connector that's not so clear connects to the mother board
  9. Brian777
    I think I figured out where that connector goes because there is a fan 1 and fan 2 connections I believe that it connects to the fan connection 1
  10. Brian777
    Brian777 MkaiL

    you are 100% correct, after find the cable that said CPU on it I looked at both ends and figured out the end that had cpu on it did in deed split in to two 4 pin. that's awesome thank you. maybe  you can tell  were to hook the cable that is showing in the second set of pictures which is a female end.

  11. Brian777
    ok Ill go look and get back with you on this..thank you very much
  12. Brian777
    I looked an did not find that humm I looked an did not find that humm
  13. Brian777
    this is the connector that I need and don't have http://www.carpcpower.com/product/4pin-p4.html
  14. Brian777
    thanks that makes sense let me go look real fast
  15. Brian777
    ASUS ROG RAMPAGE V 10th EDITION 10 LGA 2011-v3 Intel X99 SATA 6Gb/s USB 3.1 USB 3.0 Extended ATX Motherboards - ...
  16. Brian777
    this is it ASUS ROG RAMPAGE V EDITION 10 LGA 2011-v3 Intel X99 SATA 6Gb/s USB 3.1 USB 3.0 Extended ATX Motherboards - ... I'm posting some more pics as well,,
  17. Brian777
    the top picture is connected to my fan controllers on top of my case and the HDD hot swap that is also on top of my case I tried you tube to see if anyone has done a build with the same mother board and case, nothing there
  18. Brian777
    meetygrapefrute that 4pin I spoke with ASUS they say I don't need it but I'm not sure if it will give me that max func of my mother board... thank you for your reply that helps. the six pin goes to my power supply. My power supply is AX1500i and dose not have a 4 pin at least I did not see one
  19. Brian777
    Brian777 TheRandomness

    I have posted where you asked me to. Also I posted a few pictures of what I need help with. the first is the connector that connects my fan controls and HDD hot swap that needs to connect to the mother board and the other two pictures are of the 4 pin ATX power connection and the 3rd is of my mother board

  20. Brian777
    High folks, as some one that has never built a computer before I need some detailed help. If you look at my case and mother board on my profile you will see what I'm talking about I hope. On my ASUS Mother Board looking were the cpu goes just to the right are two power connections, one is a 6 pi which goes to the power supply and then you have the ATX power 4 pi connector, now one of my questions is the 4 pin where dose the other end connect to? On the case I have fan controls and HDD hot swap which I have connected together but there is a connector that supposed to connect to the mother board were on the mother board dose this connect to? Please see pictures. The manual is not detailed enough for me to understand how to make the connections correctly. thank you all for your help
  21. Brian777

    The exact date that my new desk top computer wi…

    Brian777 replied to Brian777's status update

    ok thank you I will do that
  22. Brian777

    The exact date that my new desk top computer wi…

    Brian777 replied to Brian777's status update

    Near the CPU is a 24 pin I know that I have that in my cables, how ever the 4pin right next to that 6 pin is a separate power cable and not to sure how that hooks up or were it hooks up. I know that the mother board is labeled and some of the connections are as well. If you look at my case that I have listed has fan controls and HDD hot swap connections that I have got but the cable that comes off the power supply cable connecting the two together I'm not to sure where that goes on my mother board.
  23. Brian777
    Brian777

    The exact date that my new desk top computer will be built is January 5th. I would have loved to assembled it myself, however I have never built a computer together before and the mother board manual dose not make it very clear on how to wire every thing up correctly. 

    1.   Show previous replies  1 more
    2. Brian777

      Brian777

      Near the CPU is a 24 pin I know that I have that in my cables, how ever the 4pin right next to that 6 pin is a separate power cable and not to sure how that hooks up or were it hooks up. I know that the mother board is labeled and some of the connections are as well. If you look at my case that I have listed has fan controls and HDD hot swap connections that I have got but the cable that comes off the power supply cable connecting the two together I'm not to sure where that goes on my mother board.   

    3. TheRandomness

      TheRandomness

      Create a thread in CPUs, motherboards, and memory about it, and people will come to help.

    4. Brian777

      Brian777

      ok thank you I will do that

  24. Brian777

    cut communication with a few people because I f…

    Brian777 replied to Megah3rtz's status update

    It also sounds like that they are never happy, so I guess it's dam if you do and dam if you don't my suggestion cut them off all together. like I said above they need to grow a pair.
  25. Brian777
    Brian777

    my computer will be up and running the first wk of Jan 2018, because I have to pay off most of my credit card then taking it in to be built... it's all most here thank God for that, long time waited for my new desk top..

×