Jump to content

zzzzzzzhhh

Member
  • Posts

    909
  • Joined

  • Last visited

Everything posted by zzzzzzzhhh

  1. What kind of monitor will you be using for a build of this calibre anyway?
  2. Oof ok, we do have a solder at home, recommend any good guides?
  3. Probably the Xbone, unless there is a large price difference between the two
  4. Acer Aspire V5 571P Laptop has been like this for a few months and I've had enough. The issue is the battery, it simply has 0 charge and won't charge, the charging LED flashes but very slowly, and it is the 'plugged in, not charging' issue. Sometimes the little changes the battery level bar to like 50% then 80% for about a second than goes back to 0%. It can only run off wall power, and sometimes when I turn on the laptop it says 'plugged in, charging' for a few seconds then reverts back to the 'not charging' state. I have tried cleaning the contacts and many online solutions too. Eventually, I replaced the battery with a genuine one I bought off eBay, turned on the laptop and... nope, the battery is on 15% (must have been shipped like that) and it isn't charging, the charging LED isn't flashing at all, when I take the power cord out the laptop shuts off, so it isn't running off the battery at all. Any help is appreciated.
  5. No need for the aftermarket cooler, good luck on the 3D printing. The build is completely fine, could be better with your budget but I don't blame you being in SA.
  6. GTX 970, R9 290/280, Just look used. If you can't find used deals, the 1050 Ti can still play basically every game at 1080p and some at 1440p with settings turned lower.
  7. https://pcpartpicker.com/product/kJM323/logitech-mouse-910004615
  8. R5 1600 = 200$ Mobo for it = 100$ 16GB of RAM for it 120$ cheap 250GB SSD = 80$ Wait, is the 750gb storage HDD or SSD?
  9. Sure get BitTorrent and uTorrent or whatever, but they are quite overrated. My favorite is BitComet, ads shouldn't get in the way and looks quite nice as well.
  10. Eh, not worth it, you're going to have to buy new RAM, Motherboard and the CPU.
  11. Depends on what the PC is being used for, if it is gaming, what GPU do you own?
  12. You might want to check out the Logitech G502 at the same price-point, DeathAdder should be fine if you like the look anyway.
  13. 1. Your haircut. 2. GTX 1070 or 1060, I think they are both good choices. 3. A better PSU if you can.
  14. Alright, thanks, the flexibility isn't needed for the LED's behind the desk, will be looking into it!
  15. No I mean, most of them look like individual lights shining, I don't want that.
  16. I need one that doesn't look like a bunch of different lights on one strip, but one whole strip of light, if you get what I mean?
  17. zzzzzzzhhh

    Just watched Discord shut down three servers I…

    Somebody's been on too many cp servers.
  18. R7 1700, programs are always trying to benefit from more cores as much as possible
  19. Haha, simplicity can never be found in the modern age. I'm sure if you do research on some screens they will give you the version HDMI. The Alienware GPU dock thing runs over thunderbolt 3 right? I'm pretty sure 4K 60Hz can be done there, but it is a GTX 1060 so the 1440p monitor would be better for gaming. The 4K monitor would make a great choice for productivity. I think you should find 4K monitors you like, that use HDMI 2.0 with a little research and specification search, and get one with the best colour, can handle the 1440p gaming and the 4K productivity.
  20. What the fuck? What kind of build do you have that needs that kind of PSU?
  21. Masterbox Lite 3, CM cases have never disappointed me for the price that they are.
  22. Yeah, just use the rest of the budget to buy an SSD. @OP
×