yaseryaser

I tried searching google for capture card hardware components, but didn't find anything useful For example a GPU you know it has gddr5 vram and a specific architecture and cuda cores and a lot of technical details , but when it comes to video capture cards I reached a dead end ! so any one knows or can give a link to a valid source I can look for about the components soldered on the pcb (in this case we are talking about internal capture card "PCIe") I hope my question was clear enough.

overclocking the CPU or the Ram ? could you please link me an article about this matter ?

I need somebody to explain to me how it could be possible to take advantage of 4000 MHz ddr4 RAM in an actual working system or build ?!? I know a lot of Motherboards supports 4000 and above but when you look at the Specs of the CPU Intel or AMD brand it does not support that speed! e.g. i9 9900k = 2666 or Threadripper or ryzen 7 =2933 , I couldnt find any CPU that support even the 3200 MHz!! my understanding is that the 3 components RAM &CPU & Motherboard should support the frequency so if the motherboard supports that high ram speed and the CPU does not it will work at a lower speed like 2666 or 2400 or whatever the value may be I hope you get my point exactly ? the ram is installed in the board and they are compatible but when it comes to the ram to interact with the processor at maximum Speed and the ram manufacturer make 4000 or 3200 MHZ module but the CPU specs lower memory bandwidth 2666 , what is the benefit of getting high speed ram such as hyper x predator 3200 kit or 4000 ?????? how would the system as a whole reach that level of speed ?

Hey guys, if someone could help me because I didn't figure out the exact time in my city , I live in middle east and I will watch it in a restaurant, I am not sure how to got the time right any help will be appreciated. Thanx in advance.

well, I was introduced to the term Net Neutrality recently and have a question. it's a concern only in the U.S or it is global and how do I know if it's affecting my country ??? I live in the middle east

Please read carefully thus my question isn't general! I want to understand a specific thing concerning Bitcoin, the abundance of this currency, I know there will only 21 million Bitcoin in the year 2140, but away from mining and focusing in buy sell this currency there is no roof for what anyone want to buy like there is no limit so the Bitcoin market is parallel to the mining coins and that leaves us with more than 21 million coins eventually right?!!(thinking of investors for example) I mean there have to be sources for it \\ or it just the coins that generated via mining \\ I hope you understand my question I am pretty confused at the moment !! I don't want to Mine just trying to grasp the god damn thing, been watching various videos and documentaries for 2 weeks now and the more I learn the more questions I have it's frustrating

you are right \ but my monitor have one vga input\ and in this scenario I should have 2 keyboards 2 mouses !!! the KVM is better in my case

like the desktop icons too big and the resolution is changed

when disconnect the cable from pc#1 and connect it to pc#2 the screen acts funny and I need to calibrate the settings

I know my post is a bit long but please read carefully so after a little research, I am planning on buying a KVM switch for my 2 PCs ( one custom build "NEW" and another prebuilt COMPAQ Pentium 4 "OLD") note: I've never used a KVM switch before just know its function. I only need to connect 2 PCs so I know for sure all I need is 2 ports switch mainly I have 2 concerns: #1 does it matter if the KVM is cheap or expensive or of a known brand?!? the avialable in my area are TRENDnet TK-207K \\ and other Chinese unknown manufacturers. my budget is below 50$ #2 is there a way that I don't need to calibrate the screen resolution(also other settings) every time I switch between the 2 PCs thus the hardware is different and one PC have win7 the other win10. really sorry for the long post but I needed to explain exactly my issue here, any advice or tip is much appreciated so please share your experience . Thanks in advance is there a way that I don't need to calibrate the screen resolution(also other settings) every time I switch between the 2 PCs and I didn't know what to search on google for this, if anyone could provide useful link or info about this

2 different sets of data 2 different OS\ but most of the time am on the new PC \ I can save money but to buy a decent IPS monitor it'll cost around 500$ so comparing 500$ on new monitor or 40$ish on a switch I'll go with the switch

you are absolutely right but maybe next year so I can get an awesome monitor IPS \ I don't want to get any display to get going and also after building my fist PC nearly cost me 900$ I am broke

my monitor is very old and has one VGA input

is there a way that I don't need to calibrate the screen resolution(also other settings) every time I switch between the 2 PCs and I didn't know what to search on google for this, if anyone could provide useful link or info about this

so after a little research, I am planning on buying a KVM switch for my 2 PCs ( one custom build "NEW" and another prebuilt COMPAQ Pentium 4 "OLD") note: I've never used a KVM switch before just know its function. I only need to connect 2 PCs so I know for sure all I need is 2 ports switch mainly I have 2 concerns: #1 does it matter if the KVM is cheap or expensive or of a known brand?!? the avialable in my area are TRENDnet TK-207K \\ and other Chinese unknown manufacturers. my budget is below 50$ #2 is there a way that I don't need to calibrate the screen resolution(also other settings) every time I switch between the 2 PCs thus the hardware is different and one PC have win7 the other win10. really sorry for the long post but I needed to explain exactly my issue here, any advice or tip is much appreciated so please share your experience . Thanks in advance

Death Note is like no other \ original masterpiece

that clarifies a lot of things thank you for your help \ are you an engineer?

it's not a big deal \ I think I will leave it unallocated then

I am planning on Dual Boot Linux Ubuntu along side Win 10 but don't want to delve in it right away because had an accident in the past forced me to wipe all my data and reinstall the OS all over again\ looking for a solution inside win for the time being thank you for quick response

I only have one storage drive M.2 Samsung 250 GB there is a little partition that I can't get rid off around 15 MB can't delete it neither merge it with the C: or D:, do I keep it unallocated and that's it any help would be great, hope the pics help you fully understand what is going on, one other thing I downloaded Magician software and run the performance benchmark but didn't know what all the numbers mean and is it good or low I am confused with the results, thanks in advance

I am aiming for a small margin of improvement my friend, I don't want to boot in 3 seconds coz it's impossible but I am looking to anything "below" 20secs I know ppl had accomplished that! not disagreeing with totally let's say you could drive your truck downhill for "Slightly" faster

I will mingle with the bios and desktop and try booting, I wish to reach 15s would be sweeeeeeeeeet

Hi everyone, finished my new PC build and I would like to have the fastest boot to win10, approximately 22 seconds which isn't bad but I think the system could be faster, there is one drive Samsung 960 Evo M.2 NVMe 250 GB more than 160 GB is FREE. so any kind of help would be wonderful, also if you like recommending a Youtube video wich has a clear steps to do faster boot times that will also work. Thanks in advance

you are right about the zip ties, should left them for the very last. I will read the MB manual thank you

Hi all please check the video, tried to explain what I need for finishing the PC build. Sorry for the bad quality of the video Thanks in advance