Superbxavier
-
Posts
12 -
Joined
-
Last visited
Superbxavier's Achievements
-
Ugh im so frustrated with my 390 I was playing skyrim fine but if I try overwatch or anything new I get the random driver crash again and hardware error 141, I emailed sapphire to ask if they have any idea
-
As for now Im going to play skyrim to test the system besides benchmarks but if I experience any more crashes i'll remove it from the case but my gpu is still 150mhz at idle but it don't affect anything from what I can tell. on a side note I feel so limited with 4gb of ram
-
My pc seems to run ok with just the kingston hyperx ram installed though it may be the reseating of the motherboard in the case though. the corsair ram can't do then stability test in any of the slots the ram is even compatible in the mobo ram compatibility sheet. also you'd think that i'd get errors running the MemTest86+ the longest I ran it was 3 passes and no errors that was about 2 1/2 hours ........so I just jumped the gun and bought another 3 sticks of the same hyperx 4gb ram.
-
so for the last day i've been running my 390 in my case after reseating the mobo and it was working fine enough to last though a aida64 stability test for 9 & 1/2 hours. but that was only using my Hyperx 4gb ram stick, now im trying it with just my corsair valuselect ram and it works with windows but if I run a aida64 stability test it crashes within 4 seconds with a hardware failure. I've tried setting the speeds to auto and stuff in the bios and swapping slots still crashing in aida64 around 4 seconds. Still I tried using Memtestx86 and It did a standard test without any errors as for my monitor resolutions I can't test it right now my buddy is borrowing my other monitor for his setup
-
so I took out the mobo and reseated it onto the standoffs to hopefully fix any short if there was one. yeah the monitors one of them is 1080p and the other is 1366x768. Worst part is I need windows 10 to play most games.
-
A short in what way? like a screw somewhere thats not supposed to be there? also when the gpu drops top 150MHz my second screen starts getting horizontal flickering lines unless it speeds up or I disable one monitor, Thanks for all the help everyone I feel lost with my pc acting like this
-
also I have the newest bios 0810 and did a cmos reset today, I don't know how to check if the board is good
-
The 390's memory clock drops from 1500MHz to 150Mhz seemingly randomly and sometimes it stays stuck at 150 unless I start a game or restart the radeon control panel. as for the 7850 i tested it in my fx system with no problems, but crashes in my ryzen systerm
-
I've had it without the sound driver and chipset driver before still same problem. the main problem with my 390 is that it would drop down to 150mhz while running a game and cause the crash but I tried having a fresh install(does RESET THIS PC but keep files reset the registry?) without any monitoring programs or third party oc tools and still drops randomly to 150
-
Yes I've tried DDU between every diver change. I don't know what could be causing it. it seems to be at random the gpu could randomly crash and recover while watching a youtube video but if I'm playing a game it usually hangs and the screen goes black with leds still on and fans spinning requiring me to hard power off lhe psu to restart. I've been monitoring temps using HWiNFO64 and AIDA64 and nothing goes above 75 gpu being the hottest. I have a noctua tower cooler and an antec 900 case
-
I turned on D.O.C.P 2133 still 1066Mhz Report.htm
-
So I've recently upgraded from an fx-8350 to a ryzen 1700x, but ever since I've upgraded its been constantly getting video driver crashes along with Default Radeon Wattman settings have crashed and been restored and Windows Reliability monitor is giving me 141 errors. I've tried reinstalling windows and using rolled back video drivers back as far as 16.11.5 then the 390 just crashed and hung, I have an old amd 7850 so i swapped it in but instead of getting the wattman errors it just crashes. also another weird thing is I can't seem to get the ram to go above 1066 MHz I've tried 3 different ram sticks and they're all rated for 2133. I've been really trying to get to the bottom of this but I'm out of ideas so here is my hardware I hope you can help me https://pastebin.com/UbtgHMQu ps. the 390 is what I had in my fx 8350 pc as well as the rosewill 1000w psu.
