Jump to content
Search In
  • More options...
Find results that contain...
Find results in...


  • Content Count

  • Joined

  • Last visited


This user doesn't have any awards

About Jokot

  • Title

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Time to put every thing together for a test fit
  2. Its not really based one any previous cases but Ive always loved the Bitfenix prodigy
  3. Making the frame. Used the same big router for these parts.
  4. More work on the handles. I made grooves in the handles using the big router in previous picture. Now just cut both of those in half and I will have my four handels. And a few pictures without tape.
  5. So this is how I will be bending and making the top and bottom "handles" I need something to bend the thin sheets around so that was part 1 of the process and that was easily done with some MDF scrap pieces. Here is the template rounded and covered in tape to avoid the glue from sticking. Here is the material I will be using. I also made a outer part for the template by bending 5mm plywood, that will also help equalize the pressure along the curve. And now ever thing is ready to be glued together and clamped down, the grain of each sheet is going against each other to get a stronger final product. You can also see the template was made with "shelves" to make clamping easier. Here is a better picture of the layers. And I also made a second one the next day.
  6. I will actually be using 4mm aluminum that is probable going to be painted white
  7. Glad you like it! Its basically every thing I want in a build and in my favorite material aswell just to top things off
  8. Hello, Its time again for a new build and this time I am going to use my favorite material, wood! After lots of planning I decided it was going to be another ITX build that would still fit at least one 240mm radiator and long graphics cards if thats what I choose to go with. The plan is to use closed watercooling loops for both CPU and GPU to make future upgrades easier. Ive seen quite a few wood builds over the years but nothing that really felt like me so this will be my version, should also be quite obvious what case I was inspired by Huge thanks to bequiet! and Asrock for helping out with the hardware for this build! And here are a few 3D renders
  9. Jokot

    Project JDM | ITX scratch build!

    Final pictures Big thanks to Alphacool, Teamgroup and be quiet! for helping out with hardware! Imgur album of all the pictures can be found HERE Make sure to follow me to get notified about future projects! Instagram- jokot.tech facebook- JokotTech
  10. Jokot

    Project JDM | ITX scratch build!

    Final assembly This will be the last update before final pictures so enjoy First time bending plexi, turned out better then i would have thought. After a lot of debating i decided to go with stock cables because sleeving them would have made them to thick and the all black cables fit the aesthetic really well anyways. Sleeved tubes <3 Modded eisbaer ready to be installed.
  11. Jokot

    Project JDM | ITX scratch build!

    Its getting there! So for time for an update, currently just have some sleeving and finale Assembly left so should be coming together soonish. I wanted some lighting effects but still didn't want any thing to flashy so i decided to integrating the leds there into the plexi tubes under neat the motherboard which i think turned out really nicely. I also made made the supports for rear 80mm fan, psu and some case feet. Some test fitting before painting. Ready for some paint. Some days later i masked of the painted parts and made the rest glossy white And ofc some pictures after it was all painted
  12. Jokot

    Project JDM | ITX scratch build!

    More 3D printing and plastic parts I made a small bracket for the start button which in this case will be a real key. Next upp is the part that connects the plexi tubes to the frame. You might ask why i didn't just go with metal tubes and the reason for that is LED's but more on that later. I still had to make some kind of motherboard mount so thats what i did. And with motherboard in place. There is also some other stuff i am working on like gpu braket, a good way to mount the rear fans and a psu mount. But yeah its mostly small stuff left on the fram.